Drayton Lifestyle LP711Si Handleiding

Drayton Niet gecategoriseerd Lifestyle LP711Si

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Drayton Lifestyle LP711Si (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
LP241Si, LP522Si, LP722SiLP111Si LP711S, i
SERVICE INTERVAL
06490050001 ISS F
Lifestyle
LP241Si LP522Si LP722S, , iLP111Si LP711S, i
06490050001 ISS F
SERVICE INTERVAL
Lifestyle
USERS NOTES
IPress the SET? button until you see SET CLOCK?.
Set the hour
IPress YES once, and then the hour will start to flash. Use the
– and + buttons to set the hour, checking for AM and PM.
Set the minute
IPress SET?, and the minutes will start to flash. Use the – and +
buttons to set the exact time.
IPress SET?, and β€˜SET DATE?’ appears in the display.
If you don’t want to change the date press SET? to go back to
normal operation. If you do, go on to the next section.
SETTING THE DATE
The weekday is automatically calculated from the date, so if
the weekday is incorrect you’ll need to reset the date.
IPress the SET? button until you see SET DATE?.
Set the year
IPress YES and the year will start to flash. Use the – and + but-
tons to adjust.
Set the month
IPress SET? and the month will start to flash. Use the – and +
buttons to adjust.
Set the day
IPress SET? and the day will start to flash. Use the – and + but-
tons to adjust.
Set the Day Light Saving
IPress SET? and the current DLS status will start to flash for day
light saving (British Summer Time). Use the – and + buttons to
turn on or off.
IPress SET? to go back to normal operation.
WEEKDAYS WEEKENDS
HW CH HW CH
ON 1 – start of first timed period 6.30am 6.30am 7.00am 7.00am
OFF 1 – end of first timed period 8.30am 8.30am 9.00am 9.00am
ON 2 – start of second timed period* 12.00pm 12.00pm 12.00pm 12.00pm
OFF 2 – end of second timed period* 12.00pm 12.00pm 12.00pm 12.00pm
ON 3 – start of third timed period 4.30pm 4.30pm 4.00pm 4.00pm
OFF 3 – final switch-off of the day 10.30pm 10.30pm 11.00pm 11.00pm
SWITCHING
WEEKDAYS WEEKENDS
HW CH HW CH
ON 1 – start of first timed period 6.30am 6.30am 7.00am 7.00am
OFF 1 – end of first timed period 8.30am 8.30am 9.00am 9.00am
ON 2 – start of second timed period* 12.00pm 12.00pm 12.00pm 12.00pm
OFF 2 – end of second timed period* 12.00pm 12.00pm 12.00pm 12.00pm
ON 3 – start of third timed period 4.30pm 4.30pm 4.00pm 4.00pm
OFF 3 – final switch-off of the day 10.30pm 10.30pm 11.00pm 11.00pm
SWITCHING
WIRING THE PROGRAMMER Cont...
Connection Charts
Make the wiring connections, as above, for the appropriate system.
For surface wiring, snap out the cable entry strip on the bottom edge
of the wall-plate. Lifestyle units are double-insulated and need no earth
connection, but an earthing continuity (loop) terminal is provided for
convenience.
After wiring, plug in the unit and tighten the securing screws.
Check the mains input has a 3A fuse, and switch on the mains.
Then set the timings as shown in the User’s Guide.
ALWAYS SWITCH OFF THE MAINS BEFORE REMOVING
THE LIFESTYLE TIMESWITCH/PROGRAMMER – AND
NEVER FIT IT TO A LIVE WALL-PLATE!
SERVICE INTERNAL FEATURE
Applicable to all models.
If you wish to activate, or adjust, the settings for the β€˜service interval’
feature then please refer to the instructions for the service interval
(LP Si) reset module [SOLD SEPARATELY]
Technical Helpline: 0
Email: customer.care@
Web: www.draytoncontrols.co.uk
INSTALLERS/ENGINEERS NOTES
THE LP522Si 5/2-DAY ELECTRONIC PROGRAMMER Cont...
Changing the timings
IPress the SET? button and you’ll see β€˜SET PROG?’.
Set the weekday central heating
IPress the YES button, and the display will ask β€˜SET CH MON to
FRI PROG?’.
IPress YES and you’ll see ON1, the start of your first central heat-
ing period. Adjust it in 1-minute steps using the – and + but-
tons. If the – and + buttons are held down, the time changes in
10-minute steps.
PROG?
MON T UE WED THU FRI
CH
PROG?
THE LP241Si 24hr ELECTRONIC PROGRAMMER Cont...
The standard program
Your system will come on for up to 3 heating periods every 24hrs.
ON1 starts the first one, OFF1 finishes it, and so on. Notice that on
the standard program ON2 and OFF2 are set to the same time for
both central heating and hot water. * This means your system won’t
respond, but if you want to activate that middle period, or change
any other timings – read on.
Changing the timings
IPress the SET? button and you’ll see β€˜SET PROG?’.
Set the central heating
IPress the YES button, and the display will ask β€˜SET CH PROG?’.
IPress YES and you’ll see ON1, the start of your first central heat-
ing period. Adjust it in 1-minute steps using the – and + but-
tons. If the – and + buttons are held down, the time changes in
10-minute steps.
IPress SET?, and you’ll see OFF1, the end of your first central
heating period. Adjust this in the same way, press SET?, then
repeat the procedure for ON2, OFF2, ON3 and OFF3.
Set the hot water
IWhen you press SET? after setting OFF3 for the central heating,
the display will ask β€˜SET HW PROG?’.
IPress YES, then set your times in the same way. Remember, in
this mode you can have different times to your central heating if
you wish.
IWhen you press SET? after setting OFF3 for the hot water, the
programmer will return to normal operation.
THE LP522Si 5/2-DAY ELECTRONIC PROGRAMMER
LP522Si – a 5/2-day program allowing for different
timings at the weekends, with central heating and hot water
working independently for up to 3 heating periods each day.
If the timings haven’t been set for you, then your programmer
will still be on the factory-set standard program. This means
that central heating and hot water will operate together, with
the same timings for weekdays and different ones for the
weekend. But it’s easy to make changes, and have heating
and water working independently – just follow the instructions.
Want to leave a timing as it is? Press SET? and move on to
the next one.
If you need to reset your timings to the standard program
and start again, press β€˜SET’ and β€˜+’ together to go back to
the pre-set program.
If you don’t press anything for two minutes, the programmer
automatically goes back to normal operation.
The standard program
Your system will come on for up to 3 heating periods every
24hrs. ON1 starts the first period, OFF1 finishes it, and so on.
Notice that ON2 and OFF2 are set to the same time.* This
means your system won’t respond, but if you want to activate
that middle period, or change any other timings – read on.
PROG?
PROG?
CH
IPress SET?, and you’ll see OFF1, the end of your first central
heating period. Adjust this in the same way, press SET?, then
repeat the procedure for ON2, OFF2, ON3 and OFF3.
Set weekday hot water
IWhen you press SET? after setting OFF3 for the central heating,
the display will ask β€˜SET HW MON to FRI PROG?’.
IPress YES, then set your times in the same way. Remember, in
this mode you can have different times to your central heating if
you wish.
Set weekend central heating
IWhen you press SET? after OFF3 for the weekday hot water,
the display will ask β€˜SET CH SAT SUN PROG?’. Press YES to
confirm, and alter the times in the same way.
Set weekend hot water
IWhen you press SET? after OFF3 for the weekend central
heating, the display will ask β€˜SET HW SAT SUN PROG?’.
Press YES, and follow the procedure.
IWhen you press SET? after OFF3 for HW SAT SUN, the
programmer will go back to normal operation.
THE LP722Si 7-DAY ELECTRONIC PROGRAMMER
LP722Si – a 7-day program allowing for different timings
on each day of the week, with central heating and hot water
working independently for up to 3 heating periods each day.
If the timings haven’t been set for you, then your programmer
will still be on the factory-set standard program. This has central
heating and hot water operating together – with the option of
having different timings for each day of the week. But it’s easy
to make changes, and have heating and water working
independently – just follow the instructions.
Want to leave a timing as it is? Press SET? and move on to the
next one.
If you need to reset your timings to the standard program and
start again, press β€˜SET’ and β€˜+’ together to go back to the
pre-set program.
If you don’t press anything for two minutes, the programmer
automatically goes back to normal operation.
The standard program
Your system will come on for up to 3 heating periods every
24hrs. ON1 starts the first period, OFF1 finishes it, and so on.
Notice that ON2 and OFF2 are set to the same time.* This
means your system won’t respond, but if you want to activate
that middle period, change any other timings – read on.
Changing the timings
IPress the SET? button and you’ll see β€˜SET PROG?’.
PROG?
CH
SAT SUN
SERVICE INTERVAL FEATURE Cont...
You should contact your service engineer to arrange a service.
IWhen the β€˜service’ is due it will display;
IAn audible alarm will sound; push any button to snooze the
alarm for 24hrs
If you haven’t already arranged for a service, you should
contact your service engineer immediately.
SETTING THE CLOCK AND DATE
Applicable to all models.
SETTING THE CLOCK
The clock in your programmer has been set at the factory,
and automatically accounts for British Summer Time.
However, should you need to set the clock, read on.
IPress SET?, and you’ll see OFF1, the end of your first central
heating period. Adjust this in the same way, press SET?, then
repeat the procedure for ON2, OFF2, ON3 and OFF3.LP722Si
7-DAY ELECTRONIC PROGRAMMER Cont...
IWhen you press SET? after setting OFF3 for the weekday central
heating, the display will ask β€˜SET HW MON to FRI PROG?’.
IPress YES, then set your hot water times in the same way.
Remember, in this mode you can have different times to your
central heating if you wish.
Set each day
If, after you’ve set OFF3 for your hot water, you want to fine-tune
one or more weekdays, press SET? until you find the first day
you want to adjust – then go through the procedure, altering any
time you wish. Press SET? to move on to the next day. When
you’ve finished, press SET? until you see β€˜SET SAT SUN
PROG?’.
If you don’t want to alter any individual days, keep pressing
SET? until you see β€˜SET SAT SUN PROG?’.
Set weekend
IPress YES, and alter the central heating and hot water times in
the same way.
IWhen you press SET? after OFF3 for HW SAT SUN, the pro-
grammer will ask the question TEST? If you want to test your
program, see below, otherwise press SET? again. If you don’t
want to test your program, press SET? again – and you’ll be
asked the question SET H’DAY? If you want to set a holiday
switch off, see page 23, otherwise press SET? again.If you’re not
going to program in a holiday switch-off, then press SET? again
and your programmer will go back to normal operation.
SERVICE INTERVAL FEATURE
Applicable to all models.
If your installer has configured the β€˜service interval’ feature,
then your programmer will display the following information.
I30 days before the next β€˜service’ is due it will display;
Ithen
Ithen
Iand then revert to the normal time display.
The display will cycle continuously. When you see
this it means; SERVICE DUE ON 25th DECEMBER.
SAT SUN
PROG?
MON
Installer note: After installation, tear along perforations indicated and retain this section - only leave
the User instructions with the end user
Installer note: After installation, tear along perforations indicated and retain this section - only leave
the User instructions with the end user
THE LP722Si 7-DAY ELECTRONIC PROGRAMMER Cont...
Set all weekdays
First you set the times that are going to be the same for each
weekday, then you can select each day individually and make
any further adjustments. If you want each day to be quite differ-
ent, go straight to β€˜Set each day.’
IPress the YES button, and the display will ask β€˜SET MON to FRI
PROG?’.
IPress YES and the display will ask β€˜SET CH MON to FRI
PROG?’.
IPress YES, and you’ll see ON1, the start of your first central
heating period. Adjust it in 1-minute steps using the – and +
buttons. If the – and + buttons are held down, the time changes
in 10-minute steps.
PROG?
MON T UE WED THU FRI
CH
PROG?
MON T UE WED THU FRI
SWITCHING STANDARD PROGRAM
ON 1 – start of first timed period 6.30am
OFF 1 – end of first timed period 8.30am
ON 2 – start of second timed period* 12.00pm
OFF 2 – end of second timed period* 12.00pm
ON 3 – start of third timed period 4.30pm
OFF 3 – final switch-off of the day 10.30pm
Technical Helpline: 0
Email: customer.care@
Web: www.draytoncontrols.co.uk

Product specificaties

Merk: Drayton
Categorie: Niet gecategoriseerd
Model: Lifestyle LP711Si

Heb je hulp nodig?

Als je hulp nodig hebt met Drayton Lifestyle LP711Si stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Drayton

Drayton

Drayton Lifestyle LP522Si Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP811 Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP822 Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP722 Handleiding

23 Augustus 2024
Drayton

Drayton SM1 Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP111 Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP111Si Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP112 Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP241 Handleiding

23 Augustus 2024
Drayton

Drayton Lifestyle LP241Si Handleiding

23 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Pioneer

Pioneer CA-R-PI.161 Handleiding

18 September 2024
Pioneer

Pioneer CA-R-ISU.002AE Handleiding

18 September 2024
Pioneer

Pioneer CA-R-VW.09PAE Handleiding

18 September 2024
Exquisit

Exquisit KGC231-60-E-050CB Handleiding

18 September 2024
Pioneer

Pioneer CA-R-PI.186 Handleiding

18 September 2024
Kidde

Kidde 900-0076 Handleiding

18 September 2024
Pioneer

Pioneer CA-R-PO.001 Handleiding

18 September 2024
Speco Technologies

Speco Technologies APCR620L Handleiding

18 September 2024
Pioneer

Pioneer CA-R-MAN.001 Handleiding

18 September 2024
Pioneer

Pioneer CA-R-IR.002 Handleiding

18 September 2024