Draper DC15/30 Handleiding
Draper
Deurdranger
DC15/30
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper DC15/30 (8 pagina's) in de categorie Deurdranger. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the product, which should be kept with the product.
This manual describes the purpose for which this product has been designed and contains all the necessary information to ensure its
correct and safe use.We recommend that this manual is read before any operation of the product, before performing any kind of
adjustment to the product, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it
will ensure both product and operator safety, together with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous
improvement determines the right to make modifications without prior warning.
DOOR CLOSER
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
â– STOCK No.62894 â– PART No.DC15/30
06/2000
- 2 -
â– STOCK No.62894 â– PART No.DC15/30
OPENING TO 120°
â– DIMENSION A = 95mm
OPENING FROM 120° TO 180°
â– DIMENSION A = 65mm
INSTALLATION INSTRUCTIONS FOR
REGULAR ARM (PULL SIDE) MOUNTING
This installation process covers regular arm installa-
tions up to 180° openings.
1. Select the door opening angle and use the dimen-
sions shown opposite. Mark four holes on the door
for the door closer and two holes on the frame for
the arm shoe.
2. Drill 4mmØ pilot holes in the door and frame for the
fixings supplied.
3. Fix the forearm/arm shoe assembly to the door
frame using the fixings supplied.
4. Attach the closer to the door using the fixings sup-
plied.
Note: The speed adjusting valve must be positioned
towards the hinged edge of the door.
5. Install the main arm onto the top pinion shaft, per-
pendicular to the door as illustrated below. Tightly
secure it in place using the screw/washer assembly
supplied.
6. Adjust the length of the forearm so that it is perpen-
dicular to the door frame when assembled to pre-
loaded main arm (see ‘top view’ illustration below).
Secure the forearm to the main arm using the
screw/washer assembly provided.
7. Snap the pinion cap over the pinion shaft at the bot-
tom of the closer unit.
8. Adjust the closing speed of the door using the pro-
cedure detailed on page 5.
REGULAR ARM INSTALLATION
Closer installs on PULL/HINGE side of door
Illustrated
Left Hand Door-LH or
Right Hand Reverse-RHR
TYPICAL TOP VIEW
INSTALLATION
- 3 -
â– STOCK No.62894 â– PART No.DC15/30
OPENING TO 120°
â– DIMENSION A = 95mm
OPENING FROM 120° TO 180°
â– DIMENSION A = 65mm
INSTALLATION INSTRUCTIONS FOR
TOP JAMB (PUSH SIDE) MOUNTING
This installation process covers top jamb installations
up to 180° openings.
1. Select the door opening angle and use the dimen-
sions shown opposite. Mark four holes on the frame
for the door closer and two holes on the door for the
arm shoe.
2. Drill 4mmØ pilot holes in the door and frame for the
fixings supplied.
3. Fix the forearm/arm shoe assembly to the door
using the fixings supplied.
4. Attach the closer to the door frame using the fixings
supplied.
Note: The speed adjusting valve must be positioned
towards the hinged edge of the door.
5. Install the main arm onto the top pinion shaft, per-
pendicular to the door as illustrated below. Tightly
secure it in place using the screw/washer assembly
supplied.
6. Adjust the length of the forearm so that it is perpen-
dicular to the door frame when preloaded with the
main arm (see ‘top view’ illustration below). Secure
the forearm to the main arm using the screw/washer
assembly provided.
7. Snap the pinion cap over the pinion shaft at the bot-
tom of the closer unit.
8. Adjust the closing speed of the door using the pro-
cedure detailed on page 5.
TOP JAMB INSTALLATION
Closer installs on frame-on
PUSH/STOP side of door
Illustrated
Left Hand Door-LH or
Right Hand Reverse-RHR
TYPICAL TOP VIEW
INSTALLATION
Product specificaties
| Merk: | Draper |
| Categorie: | Deurdranger |
| Model: | DC15/30 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper DC15/30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Deurdranger Draper
25 April 2023
19 April 2023
3 December 2022
Handleiding Deurdranger
- Deurdranger Axa
- Deurdranger Burg-Wachter
- Deurdranger Stanley
- Deurdranger Yale
- Deurdranger Orima
- Deurdranger Hard Head
- Deurdranger Surtek
- Deurdranger ASSA ABLOY
- Deurdranger BUVA
- Deurdranger Dorma
- Deurdranger Dormakaba
- Deurdranger Ivana
- Deurdranger SARGENT
Nieuwste handleidingen voor Deurdranger
20 Februari 2024
20 Februari 2024
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
9 Juli 2023
9 Juli 2023
6 Juli 2023