Dormakaba Universal PT60 Handleiding

Dormakaba Niet gecategoriseerd Universal PT60

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba Universal PT60 (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

MUNDUS Premium and Comfort

PT30

Overpanel Patch fittings

Installation instructions

942002 – 10-2017

| | EN

2MUNDUS Patch Fittings 10-2017942002

dormakaba MUNDUS Premium and Comfort PT30

Installation Instructions

Table of Contents

Table of contents

 Technical specifications 

1.1 Overview 3

1.1.1 General information 3

1.1.2 Intended use 3

1.1.3 Glass requirements/fittings/mounting 3

1.1.4 Requirements for glass panel 3

1.1.5 Safety instructions 3

1.1.6 Symbols used - Safety/Installation 3

1.1.7 Maintenance, care, repair 3

1.1.8 Disposal 3

1.2 Door dimensions 4

1.3 Glass thickness/pivot point 5

angle specifications 5

1.4 Tempered laminate glass (TLG)

and adhesive specifications 6

 Installation instructions 

2.1 Overall 7

2.2 Plate/stud location 8

2.3 Secure patch plate to stud 9

2.4 Install gaskets 9

2.5 Install glass and remaining fitting parts 10

2.6 Secure and set fitting location 10

2.7 Plumb and level the fittings 11

2.8 Setting the pivot/blank/stop 12

2.9 Door alignment 12

2.10 Door adjustments 13

2.11 Apply adhesive 14

2.12 Install covers 14

dormakaba MUNDUS Premium and Comfort PT30

Installation Instructions

942002 10-2017MUNDUS Patch Fittings 3

Technical specifications

1 Technical specifications

. Overview

These instructions are for installation of the PT30

Overpanel Patch Fittings for the following mounting

and style versions:

1. Glass mounting

1.1.1 General information

• dormakaba requires use of tempered laminated or

tempered monolithic glass.

• dormakaba glass hardware is not suitable for harsh

environment; for example, applications where

chemicals (e.g. chlorine) are used such as indoor

swimming pools, saunas, or salt-water pools.

• Do not swing doors with excessive force. Install

limiting stop to prevent door from opening too far.

1.1.2 Intended use

• For pivoting doors in indoor or covered areas only.

• For manual slowly opening and closing only.

1.1.3 Glass requirements/fittings/mounting

• The substructure/wall must be able to bear

permanent loads, be level (max. tolerance: 1/16”

[2] per 39” [1m]).

• Fasteners must be sufficiently dimensioned for the

substructure/wall and weight of the door.

• When adjusting glass elements, always stick to the

required clearance for the respective hardware.

Adjust clearance so glass does not come in contact

with any hard surfaces such as glass, metal or

concrete.

• Do not use excessive force when installing the glass

(avoid over tightening screws.)

1.1.4 Requirements for glass panel

• Heat-soaked thermally tempered safety glass

• Clamping area must be flat and uncoated (no

self-cleaning coating!)

• Never use glass with conchoidal fractures and/or

damaged edges.

1.1.5 Safety instructions

• Installation requires two people.

• Always wear protective clothing.

• Only properly qualified and specially trained staff is

authorized to mount dormakaba glass hardware.

• Due to crushing hazards and possible injury caused

by breakage of glass during mounting,

corresponding protective clothing (especially gloves

and protective goggles) is required.

• Never clamp metal fitting hardware directly to

glass surface.

• Never use clamping products on surfaces with

self-cleaning coatings.

1.1.6 Symbols used - Safety/Installation

CAUTION

Mounting components must meet the

requirements of substructure/wall and door

weight. Please read the technical information

for fittings.

WARNING

Risk of breaking glass. When installing the

door, support the door panel with a block of

wood or similar object.

TIPS AND RECOMMENDATIONS

Information note

CLOSING EDGE OF DOOR

1.1.7 Maintenance, care, repair

• Immediately replace damaged parts.

• Always use original dormakaba parts.

• Clean clamping area with alcohol-based standard

commercial cleaning agent before mounting the

glass hardware.

• Use a damp cloth for occasional cleaning.

• Always use silicone - and oil-free cleaners (e.g.

acetone).

• Check glass hardware at regular intervals for

proper positioning, smooth operation and correct

adjustment.

• High traffic door systems require inspection by

properly qualified staff (specialized companies or

installation firms.)

• Function of fittings is recommended to be

inspected every 500,000 movements by a specialist.

1.1.8 Disposal

Disposal in accordance with local, state and national

regulations.

Product specificaties

Merk:	Dormakaba
Categorie:	Niet gecategoriseerd
Model:	Universal PT60

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba Universal PT60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023

Dormakaba RCI S2500A Handleiding

9 Juli 2023

Dormakaba EAC Handleiding

9 Juli 2023

Dormakaba CLM9000 Handleiding

9 Juli 2023

Dormakaba DKX Type III Handleiding

9 Juli 2023

Dormakaba 9800 Handleiding

9 Juli 2023

Dormakaba HSW-GP Handleiding

9 Juli 2023

Dormakaba DKX-10 Handleiding

9 Juli 2023

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024