Dormakaba Universal Motion Handleiding

Dormakaba Niet gecategoriseerd Universal Motion

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba Universal Motion (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 97 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

Universal Motion

Bottom Center Hung Self-Closing Patching Fitting

with or without hold open

Installation instructions

833006 – 06-2020

| | EN

2Universal Motion 06-2020833006

dormakaba Universal Motion Installation Instructions

Table of Contents

Table of contents

1 Technical specifications 3

1.1 Overview 3

1.1.1 General information 3

1.1.2 Intended use 3

1.1.3 Glass requirements/fittings/mounting 3

1.1.4 Requirements for glass panel 3

1.1.5 Safety instructions 3

1.1.6 Symbols used - Safety/Installation 3

1.1.7 Maintenance, care, repair 3

1.1.8 Disposal 3

1.2 Door dimensions & options 4

2 Installation instructions 5

2.1 Overall 5

2.2 Prepare floor and install pivot plate 5

2.3 Install self-closing patch fitting on glass 6

2.4 Install gaskets 6

2.5 Secure self-closing patch fitting to glass 6

2.6A Option 1: Install door panel (with PT20/PT30) 7

2.6B Option 2: Install door panel (with PT20/PT24) 8

2.6C Option 3: Install door panel (with PT20/PT40) 9

2.7 Securing floor pivot plate 10

2.8 Install covers 11

2.9 Add door stop (optional) 11

3 Adjustments 12

3.1 Adjusting hold open (optional) 12

dormakaba Universal Motion Installation Instructions

833006 06-2020Universal Motion 3

Technical specifications

1 Technical specifications

1.1 Overview

These instructions are for installation of the Universal

Motion Self-Closing Patch Fittings for the following

mounting and style versions:

1. Glass mounting

1.1.1 General information

• dormakaba requires use of tempered monolithic

glass.

• dormakaba glass hardware is not suitable for harsh

environment; for example, applications where

chemicals (e.g. chlorine) are used such as indoor

swimming pools, saunas, or salt-water pools.

• Do not swing doors with excessive force. Install

limiting stop to prevent door from opening too far.

1.1.2 Intended use

• For pivoting doors in indoor or covered areas only.

• For manual slowly opening and closing only.

1.1.3 Glass requirements/fittings/mounting

• The substructure/wall must be able to bear

permanent loads, and be level (max. tolerance:

1/16” [2] per 39” [1m]).

• Fasteners must be sufficiently dimensioned for the

substructure/wall and weight of the door.

• When adjusting glass elements, always stick to the

required clearance for the respective hardware.

Adjust clearance so glass does not come in contact

with any hard surfaces such as glass, metal or

concrete.

• Do not use excessive force when installing the glass

(avoid over tightening screws.)

1.1.4 Requirements for glass panel

• dormakaba requires use of fully tempered glass,

which complies with ASTM C 1036 and ASTM C

1048. Secondary heat soaking processes are

optional but not required.

• Clamping area must be flat and uncoated (no

self-cleaning coating!)

• Never use glass with conchoidal fractures and/or

damaged edges.

1.1.5 Safety instructions

• Installation requires two people.

• Always wear protective clothing.

• Only properly qualified and specially trained staff

are authorized to mount dormakaba glass

hardware.

• Due to crushing hazards and possible injury caused

by breakage of glass during mounting,

corresponding protective clothing (especially gloves

and protective goggles) is required.

• Never clamp metal fitting hardware directly to

glass surface.

1.1.6 Symbols used - Safety/Installation

CAUTION

Mounting components must meet the

requirements of substructure/wall and door

weight. Please read the technical information

for fittings.

WARNING

Risk of breaking glass. When installing the

door, support the door panel with a block of

wood or similar object.

CLOSING EDGE OF DOOR

1.1.7 Maintenance, care, repair

• Immediately replace damaged parts.

• Always use original dormakaba parts.

• Clean clamping area with alcohol-based standard

commercial cleaning agent before mounting the

glass hardware.

• Use a damp cloth for occasional cleaning.

• Always use silicone - and oil-free cleaners (e.g.

acetone).

• Check glass hardware at regular intervals for

proper positioning, smooth operation and correct

adjustment.

• High traffic door systems require inspection by

properly qualified staff (specialized companies or

installation firms.)

• Function of fittings is recommended to be

inspected every 500,000 movements by a specialist.

1.1.8 Disposal

Disposal in accordance with local, state and national

regulations.

Product specificaties

Merk:	Dormakaba
Categorie:	Niet gecategoriseerd
Model:	Universal Motion

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba Universal Motion stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023

Dormakaba RCI S2500A Handleiding

9 Juli 2023

Dormakaba EAC Handleiding

9 Juli 2023

Dormakaba CLM9000 Handleiding

9 Juli 2023

Dormakaba DKX Type III Handleiding

9 Juli 2023

Dormakaba 9800 Handleiding

9 Juli 2023

Dormakaba HSW-GP Handleiding

9 Juli 2023

Dormakaba DKX-10 Handleiding

9 Juli 2023

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024