Dormakaba RTS 88 Handleiding
Dormakaba
cierrapuertas
RTS 88
Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba RTS 88 (10 pagina's) in de categorie cierrapuertas. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
RTS Series Package 01, 02
Side load aluminum door and frame
Installation instructions
08280261 – 02-2020
| | EN
2RTS88 Closers 02-202008280261
dormakaba RTS88 Package 01, 02 Installation Instructions Table of Contents
Table of contents
1 Installation instructions 3
1.1 Prepare frame and install closer 3
1.2 Prepare top of door and install closer arm 4
1.3 Prepare bottom of door and install pivot 5
1.4 Install door 6
2 Adjustments 7
2.1 Door alignment 7
2.2 Clearance adjustments (if required) 8
3 Door removal 9
2.3 Adjust closing speeds 9
dormakaba RTS88 Package 01, 02 Installation Instructions
08280261 02-2020RTS88 Closers 3
Frame
Closer
1.1 Prepare frame and install closer
1 Installation instructions
Fig.1
Header
Side
jamb
Mounting
bracket
1/4-20 flat
head machine
screws
Angle bracket
Fillister head
machine
screws
Closer
Cover plate
1.1.1 Prepare header and side jamb according to
template.
1.1.2 Fasten mounting bracket to side jamb with 3
No. 8-32 pan head machine screws.
1.1.3 Fasten header to side jamb with two No. 10-32
flat head machine screws.
1.1.4 Fasten two 1/4-20 flat head machine screws to
header with lock washers and nuts.
1.1.5 Fasten angle bracket to closer with two hex
head machine screws and flat washers.
1.1.6 Install 2 fillister head machine screws into
mounting tabs on closer; make approximately
three turns.
NOTE: For RTS88 models only - do not remove spacer
washers in mounting tabs.
1.1.7 Install closer into header by inserting
mounting tabs into mounting bracket.
1.1.8 Raise end of closer with angle bracket onto
the two 1/4-20 screws.
1.1.9 Fasten angle bracket with the two remaining
1/4-20 nuts and lock washers.
1.1.10 Tighten the 2 fillister head machine screws
securely.
1.1.11 Install cover plate by sliding tab into frame.
1.1.12 Fasten opposite end to mounting bracket with
2 No.8-32 flat head machine screws provided.
Product specificaties
| Merk: | Dormakaba |
| Categorie: | cierrapuertas |
| Model: | RTS 88 |
Heb je hulp nodig?
Als je hulp nodig hebt met Dormakaba RTS 88 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding cierrapuertas Dormakaba
28 Juni 2023
Andere handleidingen Dormakaba
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023
9 Juli 2023