Dormakaba PT21 Handleiding

Dormakaba Niet gecategoriseerd PT21

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Dormakaba PT21 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
Narrow Headers - 1” and 1-1/4”
with PT21/PT21M for single or paired doors
Installation instructions
933820 – 08-2018
| | EN
2Narrow Headers with PT21/PT21M 08-2018933820
dormakaba Narrow Headers 1β€œ and 1-1/4β€œ with PT21 /PT21M
Installation Instructions
Table of Contents
Table of contents
1  Technical specifications 3
1.1 Overview 3
1.1.1 General information 3
1.1.2 Intended use 3
1.1.3 Glass requirements/fittings/mounting 3
1.1.4 Requirements for glass panel 3
1.1.5 Safety instructions 3
1.1.6 Symbols used - Safety/Installation 3
1.1.7 Maintenance, care, repair 3
1.1.8 Disposal 3
1.2 Pin diameter specifications 4
2  Installation instructions 4
2.1 Install narrow header for single or paired door:
PT21/PT21M 4
2.2 Secure cover 5
2.3 PT21/PT21M adjustments 5
dormakaba Narrow Headers 1β€œ and 1-1/4β€œ with PT21 /PT21M
Installation Instructions
Narrow Headers with PT21/PT21M 933820 08-2018 3
Technical specifications
1.1 Overview
These instructions are for installation of 1” and 1-1/4”
headers for the following mounting and style versions:
1. Glass mounting
1.1.1 General information
β€’ dormakaba requires use of tempered laminated or
tempered monolithic glass.
β€’ dormakaba glass hardware is not suitable for
applications in rooms where chemicals (e.g.
chlorine) are used such as indoor swimming pools,
saunas, or salt-water pools.
β€’ Do not swing doors with excessive force. Install
limiting stop to prevent door from opening too far.
1.1.2 Intended use
β€’ To house the PT21M overhead concealed pivot.
1.1.3 Glass requirements/fittings/mounting
β€’ The substructure/wall must be able to bear
permanent loads, be level (max. tolerance: 1/16”
[2] per 39” [1m]).
β€’ Fasteners must be sufficiently dimensioned for the
substructure/wall and weight of the door.
β€’ When adjusting glass elements, always stick to the
required clearance for the respective hardware.
Adjust clearance so glass does not come in contact
with any hard surfaces such as glass, metal or
concrete.
β€’ Do not use excessive force when installing the glass
(avoid over tightening screws.)
1.1.4 Requirements for glass panel
β€’ dormakaba requires use of fully tempered glass,
which complies with ASTM C 1036 and ASTM C
1048. Secondary heat soaking processes are
recommended but not required. This applies to
both tempered monolithic and tempered laminated
glass.
β€’ Clamping area must be flat and uncoated (no
self-cleaning coating!)
β€’ Never use glass with conchoidal fractures and/or
damaged edges.
1.1.5 Safety instructions
β€’ Installation requires two people.
β€’ Only properly qualified and specially trained staff is
authorized to mount dormakaba glass hardware.
β€’ Due to crushing hazards and possible injury caused
by breakage of glass during mounting,
corresponding protective clothing (especially gloves
and protective goggles) is required.
β€’ Never clamp metal glass fitting hardware directly
to glass surface.
1.1.6 Symbols used - Safety/Installation
CAUTION
Mounting components must meet the
requirements of substructure/wall and door
weight. Please read the technical information
for fittings.
WARNING
Risk of breaking glass. When installing the
door, support the door panel with a block of
wood or similar object.
TIPS AND RECOMMENDATIONS
Universal PT21 pin diameter: 5/8” [15]
MUNDUS PT21M pin diameter: 9/16” [14]
1.1.7 Maintenance, care, repair
β€’ Immediately replace damaged parts.
β€’ Always use original dormakaba parts.
β€’ Clean clamping area with alcohol-based standard
commercial cleaning agent before mounting the
glass hardware.
β€’ Use a damp clothe for occasional cleaning.
β€’ Always use silicone - and oil-free cleaners (e.g.
acetone).
β€’ Check glass hardware at regular intervals for
proper positioning, smooth operation and correct
adjustment.
β€’ High traffic door systems require inspection by
properly qualified staff (specialized companies or
installation firms.)
1.1.8 Disposal
Disposal in accordance with local, state and national
regulations.
1  Technical specifications

Product specificaties

Merk: Dormakaba
Categorie: Niet gecategoriseerd
Model: PT21

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba PT21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Dormakaba

Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023
Dormakaba

Dormakaba RCI S2500A Handleiding

9 Juli 2023
Dormakaba

Dormakaba EAC Handleiding

9 Juli 2023
Dormakaba

Dormakaba CLM9000 Handleiding

9 Juli 2023
Dormakaba

Dormakaba DKX Type III Handleiding

9 Juli 2023
Dormakaba

Dormakaba 9800 Handleiding

9 Juli 2023
Dormakaba

Dormakaba HSW-GP Handleiding

9 Juli 2023
Dormakaba

Dormakaba DKX-10 Handleiding

9 Juli 2023
Dormakaba

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023
Dormakaba

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024