Dormakaba MUTO Premium Handleiding

Dormakaba Niet gecategoriseerd MUTO Premium

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba MUTO Premium (35 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/35

MUTO Premium

XL80 Telescopic - Ceiling Mount with Sidelites

with Moving Floor Guide

Dormotion (DM) optional

Installation instructions

936043 – 05-2021

| | EN

2MUTO Premium 05-2021936043

dormakaba MUTO XL80 Telescopic Ceiling Mount with/without Dormotion

with Sidelites Installation Instructions

Table of Contents

Table of contents

1 Technical specifications 3

1.1 Overview 3

1.1.1 General information 3

1.1.2 Intended use 3

1.1.3 Glass requirements/fittings/mounting 3

1.1.4 Requirements for glass panel 3

1.1.5 Safety instructions 3

1.1.6 Symbols used - Safety/Installation 3

1.1.7 Maintenance, care, repair 3

1.1.8 Disposal 3

1.2 Specification - technical data 4

1.3 Tempered laminate glass (TLG) and

adhesive specifications 4

2 Installation preparation 5

2.1 Overall 5

2.2 Door/wall dimensions 6

3 Installation instructions -

Slow moving panel (SMP) 7

3.1 Installing end stops in SMP 7

3.2 Securing gasket to SMP track 7

3.3 Securing sidelite section profile to SMP track 8

3.4 Specifications for securing track to

mounting surface 8

3.5 Installing U-Channel for sidelite 9

3.6 Installing sidelite glass 9

3.7 Installing sidelite glass filler panel 10

3.8 Installing sidelite glass gasket 10

3.9A Installing roller carriers: on SMP

monolithic glass ONLY 11

3.9B Installing roller carriers:

on SMP tempered laminate glass ONLY 12

3.10 Adjust roller carrier wheels 13

3.11 Disengage the anti-jump 13

3.12 Assemble simultaneous drive 14

3.13 Secure moving floor guide 15

3.14 Install glass/rollers in SMP track 16

3.15 Install floor guide 16

3.16 Install floor guide: continued 17

3.17 Engaging anti-jump 17

3.18 Adjustment door height 17

3.19 Adjustment end stop location:

LEADING end stop

Adjustment end stop location:

TRAILING end stop 18

4 Installation instructions -

Quick moving panel (QMP) 19

4.1 Installing end stops in QMP 19

4.2 Connecting the doors via the cable bracket 19

4.3 Securing track for QMP 20

4.4 Secure clamp profile for QMP 21

4.5 Install hook set (less Dormotion) 21

4.6 Installing roller carriers 22

4.7 Installing DORMOTION start/stop (optional) 23

4.8 Disengaging the anti-jump 23

4.9 Install glass/rollers in QMP track 24

4.10 Engaging anti-jump 24

4.11 Align the cable 25

4.12 Adjustment end stop location:

LEADING end stop

Adjustment end stop location:

TRAILING end stop 26

4.13 Securing the cable to the QMP cable clamp 27

4.14 Install DORMOTION unit into

QMP track (optional) 28

4.15 Adjust start/stop pin height (if necessary) 29

4.16 QMP track cover and end caps 30

4.17 SMP cover profile 31

4.18 Cover profile for passage 32

4.19 Cover clips 32

4.20 Cover spacers 33

4.21 Install brush profile 33

4.22 Secure system cover 34

dormakaba MUTO XL80 Telescopic Ceiling Mount with/without Dormotion

with Sidelites Installation Instructions

MUTO Premium 05-2021936043 3

Technical specifications

1 Technical specifications

1.1 Overview

These instructions are for installation of MUTO

Premium XL80 Telescopic panels for the following

mounting and style versions:

1. Ceiling mount with Sidelite

1.1.1 General information

• dormakaba requires use of tempered laminated or

tempered monolithic glass.

• dormakaba glass hardware is not suitable for

harsh environment; for example, applications where

chemicals (e.g. chlorine) are used such as indoor

swimming pools, saunas, or salt-water pools.

• Never move sliding panels faster than walking

speed and always stop the door manually before it

reaches end position.

• Do not slide doors with excessive force. Ensure

proper installation of limiting stop to prevent door

from opening too far.

1.1.2 Intended use

• For sliding doors in dry indoor areas only.

• For manual slow opening and closing only.

1.1.3 Glass requirements/fittings/mounting

• The substructure/wall must be able to bear

permanent loads, be level (max. tolerance: 1/16”

[2] per 39” [1m]).

• Fasteners must be sufficiently dimensioned for the

substructure/wall and weight of the door.

• When adjusting glass components, always stick to

the required clearance for the respective hardware.

Adjust clearance so glass does not come in contact

with any hard surfaces such as glass, metal or

concrete.

• Do not use excessive force when installing the glass

(avoid over tightening screws.)

1.1.4 Requirements for glass panel

• dormakaba requires use of fully tempered glass,

which complies with ASTM C 1036 and ASTM C

1048. Secondary heat soaking processes are

recommended but not required. This applies to

both tempered monolithic and tempered laminated

glass.

• Clamping area must be flat and uncoated (no

self-cleaning coating!)

• Never use glass with conchoidal fractures and/or

damaged edges.

1.1.5 Safety instructions

• Installation requires two people.

• Always wear protective clothing.

• Only properly qualified and specially trained staff

are authorized to mount dormakaba glass

hardware.

• Due to crushing hazards and possible injury caused

by breakage of glass during mounting,

corresponding protective clothing (especially gloves

and protective goggles) is required.

• Never clamp metal fitting hardware directly to

glass surface.

1.1.6 Symbols used - Safety/Installation

CAUTION

Mounting components must meet the

requirements of substructure/wall and door

weight. Please read the technical information

for fittings.

WARNING

Risk of breaking glass. When installing the

door, support the door panel with a block of

wood or similar object.

TIPS AND RECOMMENDATIONS

Information note

CLOSING EDGE OF DOOR

1.1.7 Maintenance, care, repair

• Immediately replace damaged parts.

• Always use original dormakaba parts.

• Clean clamping area with alcohol-based standard

commercial cleaning agent before mounting the

glass hardware.

• Use a damp cloth for occasional cleaning.

• Always use silicone - and oil-free cleaners (e.g.

acetone).

• Check glass hardware at regular intervals for

proper positioning, smooth operation and correct

adjustment.

• High traffic door systems require inspection by

properly qualified staff (specialized companies or

installation firms.)

1.1.8 Disposal

Disposal in accordance with local, state and national

regulations.

Product specificaties

Merk:	Dormakaba
Categorie:	Niet gecategoriseerd
Model:	MUTO Premium

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba MUTO Premium stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023

Dormakaba RCI S2500A Handleiding

9 Juli 2023

Dormakaba EAC Handleiding

9 Juli 2023

Dormakaba CLM9000 Handleiding

9 Juli 2023

Dormakaba DKX Type III Handleiding

9 Juli 2023

Dormakaba 9800 Handleiding

9 Juli 2023

Dormakaba HSW-GP Handleiding

9 Juli 2023

Dormakaba DKX-10 Handleiding

9 Juli 2023

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024