Dormakaba EML 310 Handleiding

Dormakaba Niet gecategoriseerd EML 310

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba EML 310 (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

Header Installation Instructions with

EML 310/320 and 371/372

For 4-1/8”, 4-1/2”, 6” Headers

For use with DRS Rails and Patch Fittings

Installation instructions

933903 – 07-2019

| | EN

2EML Header Shim 07-2019933903

dormakaba Header Installation Instructions with EML310/320 and 371/372

For use with DRS Rails and Patching Fittings (4-1/8”, 4-1/2”, 6” Headers)

Table of Contents

Table of contents

1 Technical specifications 3

1.1 RTS88 and PT21 Header

Specification Overview 3

1.1.1 General information 3

1.1.2 Glass requirements/fittings/mounting 3

1.1.3 Requirements for glass panel 3

1.1.4 Safety instructions 3

1.1.5 Symbols used - Safety/Installation 3

1.1.6 Maintenance, care, repair 3

1.1.7 Disposal 3

1.2 EML310 and EML320 Specifications Overview 4

1.1.1 General information 4

1.1.2 Listings 4

1.1.3 Conditions of acceptability 4

1.1.4 EML310/320 Mechanical specifications:

(Including 1/4” [6.4] mounting bracket) 4

1.1.5 EML371/372 Mechanical specifications:

(Including 3/16” [4.8] mounting bracket) 5

1.1.6 Environmental specifications: 5

1.1.7 EML310/320 Electrical specifications: 5

1.1.8 EML371/372 Electrical specifications: 5

1.1.9 Inspection and Maintenance 5

1.3 EML header options 6

1.4 Pin diameter specifications 7

2 RTS88 and PT21 installation instructions 8

2.1 Install header for single or double door: RTS88 8

2.2 Install header for single or double door: PT21 9

2.3 RTS88 adjustments 10

2.4 PT21 adjustments 10

3 EML and shim installation instructions 11

3.1 Prepare/disassemble mag lock body

and mounting plate 11

3.2 Secure header shim to frame/ceiling surface

(for 4-1/8” or 4-1/2” headers only) 11

3.3 Secure mounting bracket and mag lock to shim

(for 4-1/8” or 4-1/2” headers only) 12

3.4 Secure mounting bracket and mag lock to shim

(for 6” headers only) 13

4 Install armature plate 14

4.1 (For use with patch fittings only)

secure glass door bracket (GDB) 14

4.2 (For use with DRS rails only) 15

5 EML310/320 and 371/372 Options 16

5.1 Instant release of lock 16

5.2 Lock monitoring options - BA -

Bond Alert Sensor 16

5.3 Lock monitoring options - DP -

Door Position Sensor 16

6 Wiring the EML 17

6.1 Wiring mag lock body through header

(for EML310/320 and 371/372) 17

6.2 Wiring mag lock body

(for EML310/320) - continued 18

6.3 Wiring for BA or BA DP combination models

(for EML371/372) 19

6.4 Wiring for Unmonitored or DP sensor models

(for EML371/372) 19

7 EML310/320 and 371/372

trouble shooting guide 20

dormakaba Header Installation Instructions with EML310/320 and 371/372

For use with DRS Rails and Patching Fittings (4-1/8”, 4-1/2”, 6” Headers)

933903 07-2019EML Header Shim 3

Technical specifications

1 Technical specifications

These instructions are for installation of the EML

310/320 and 371/372, EML Header Shim, with RTS88

and PT21 Headers for the following ceiling mounting.

1.1.1 General information

• dormakaba requires use of tempered monolithic or

tempered laminated glass.

• dormakaba glass hardware is not suitable for harsh

environment; for example, applications where

chemicals (e.g. chlorine) are used such as indoor

swimming pools, saunas, or salt-water pools.

• Do not swing doors with excessive force. Install

limiting stop to prevent door from opening too far.

1.1.2 Glass requirements/fittings/mounting

• The substructure/wall must be able to bear

permanent loads, and be level (max. tolerance:

1/16” [2] per 39” [1m]).

• Fasteners must be sufficiently dimensioned for the

substructure/wall and weight of the door.

• When adjusting glass elements, always stick to the

required clearance for the respective hardware.

Adjust clearance so glass does not come in contact

with any hard surfaces such as glass, metal or

concrete.

• Do not use excessive force when installing the glass

(avoid over tightening screws.)

1.1.3 Requirements for glass panel

• dormakaba requires use of fully tempered glass,

which complies with ASTM C 1036 and ASTM C

1048. Secondary heat soaking processes are

optional but not required.

• Clamping area must be flat and uncoated (no

self-cleaning coating!)

• Never use glass with conchoidal fractures and/or

damaged edges.

1.1.4 Safety instructions

• Installation requires two people.

• Always wear protective clothing.

• Only properly qualified and specially trained staff

are authorized to mount dormakaba glass

hardware.

• Due to crushing hazards and possible injury caused

by breakage of glass during mounting,

corresponding protective clothing (especially gloves

and protective goggles) is required.

• Never clamp metal fitting hardware directly to

glass surface.

1.1.5 Symbols used - Safety/Installation

CAUTION

Mounting components must meet the

requirements of substructure/wall and door

weight. Please read the technical information

for fittings.

WARNING

Risk of breaking glass. When installing the

door, support the door panel with a block of

wood or similar object.

TIPS AND RECOMMENDATIONS

Universal PT21 pin diameter: 5/8” [15]

MUNDUS PT21 pin diameter: 9/16” [14]

1.1.6 Maintenance, care, repair

• Immediately replace damaged parts.

• Always use original dormakaba parts.

• Clean clamping area with alcohol-based standard

commercial cleaning agent before mounting the

glass hardware.

• Use a damp cloth for occasional cleaning.

• Always use silicone - and oil-free cleaners (e.g.

acetone).

• Check glass hardware at regular intervals for

proper positioning, smooth operation and correct

adjustment.

• High traffic door systems require inspection by

properly qualified staff (specialized companies or

installation firms.)

1.1.7 Disposal

Disposal in accordance with local, state and national

regulations.

1.1 RTS88 and PT21 Header Specification Overview

Product specificaties

Merk:	Dormakaba
Categorie:	Niet gecategoriseerd
Model:	EML 310

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba EML 310 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023

Dormakaba RCI S2500A Handleiding

9 Juli 2023

Dormakaba EAC Handleiding

9 Juli 2023

Dormakaba CLM9000 Handleiding

9 Juli 2023

Dormakaba DKX Type III Handleiding

9 Juli 2023

Dormakaba 9800 Handleiding

9 Juli 2023

Dormakaba HSW-GP Handleiding

9 Juli 2023

Dormakaba DKX-10 Handleiding

9 Juli 2023

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024