DoorBird D2102V Handleiding

DoorBird Intercomsystemen D2102V

Lees hieronder de 📖 handleiding in het Nederlandse voor DoorBird D2102V (56 pagina's) in de categorie Intercomsystemen. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

VERSION ., MIN. HW .

Installation Manual (Pages 2-14)

IP VIDEO DOOR STATION

D21x Series

Installationsanleitung (Seite 15-28)

IP VIDEO TÜRSTATION

D21x Serie

Manuel d´installation (Page 29-42)

INTERPHONE VIDÉO IP

Série D21x

Manual de Instalación (Página 43-55)

VIDEOPORTERO IP

Serie D21x

INSTALLATION MANUAL

Read these instructions carefully before starting to

use any components. Keep the manual so you can

refer to it at a later date if required. If you hand over

the device to other persons for use, please hand over

the operating manual as well.

You can always ﬁnd the most up-to-date version

of the installation manual on www.doorbird.com/

support

To make things easier we use the term “device” for

the product “IP Video Door Station” and “mobile

device” for a smartphone or tablet.

Liability

Every care has been taken in the preparation of this

document. Please inform Bird Home Automation

GmbH of any inaccuracies or omissions. Bird Home

Automation GmbH cannot be held responsible for any

technical or typographical errors and reserves the right

to make changes to the product and manuals without

prior notice. Bird Home Automation GmbH makes

no warranty of any kind with regard to the content

of this document, including, but not limited to, the

implied warranties of merchantability and ﬁtness for

a particular purpose. Bird Home Automation GmbH

shall neither be liable nor responsible for incidental

or consequential damages in connection with the

furnishing, performance or use of this material. This

product is only to be used for its intended purpose.

Equipment Modiﬁcations

This equipment must be installed and used in strict

accordance with the instructions given in the user

documentation. This equipment contains no compo-

nents that require service by the user. Unauthorized

equipment changes or modiﬁcations will invalidate

all applicable regulatory certiﬁcations and approvals.

Symbols used

Caution: Indicates a hazardous situation

which, if not avoided, could result in minor

or moderate injury.

Danger: Indicates a hazardous situation

which, if not avoided, will result in death or

serious injury.

Warning: Indicates a hazardous situation

which, if not avoided, could result in death

or serious injury.

Notice: Indicates a situation which, if not

avoided, could result in damage to property.

Note: Indicates useful information which

helps in getting the most out of the product.

N OT I CE

Important: Indicates signiﬁcant information

which is essential for the product to function

correctly.

Hazard information

∙ Mounting, installation and servicing work on

electrical devices may only be performed by

a qualiﬁed eletrician. Failure to observe this

regulation could result in the risk of serious

damage to health or fatal injury due to electric

shocks.

∙ Devices with 110-240 V connection: The device

may only be connected to an easily accessible

power socket outlet. The mains adapter must

be pulled out if a hazard occurs.

∙ For power supply, only use the original

plug-in mains adapter delivered with the

device or a recommended PoE-Switch/

PoE-Injector as speciﬁed in this manual.

∙ Because of electrostatic charging, direct

contact with the circuit board can result in

destruction of the device. Direct contact

with the circuit board must therefore be

avoided at any time.

∙ Observe the EN 60065 resp. EN 60950 resp.

EN 62368 standard.

∙ Do not use the device if there are signs of

damage to the housing, control elements or

connecting sockets, for example, or if it

demonstrates a malfunction. If you have any

doubts, please have the device checked by

an authorized expert.

∙ Do not open the device. This voids the

warranty of the device. The device does not

contain any parts that can be maintained

by the user. In the event of an error, please

have the device checked by an authorized

expert.

∙ For safety, approval and licensing reasons

(CE/FCC/IC etc.), unauthorized change and/or

modiﬁcation of the device is not permitted.

∙ The device is not a toy; do not allow

children to play with it. Do not leave packaging

material lying around. Plastic ﬁlms/bags,

pieces of polystyrene, etc. can be dangerous

in the hands of a child.

∙ Always lay cables in such a way that they

do not become a risk to people and domestic

animals.

WARNING

ENGLISH

∙ Voltage is applied to parts within the

equipment. Do not touch any parts that are

not associated with the installation, wiring,

or connection. Electric shock could result.

∙ On devices which are not marked as

weather-proof: Keep the device away from

water or any other liquid.

∙ Do not install or make any wire terminations

while power supply is plugged in. It can cause

eletric shock or damage to the device.

∙ Before turning on power, make sure wires are

not crossed or shorted. If not, ﬁre or eletric

shock could result.

∙ High voltage may be present internally.

Do not open the device. Electric shock could

result.

∙ The device is not of explosion-proof. Do not

install or use near gases or ﬂammable

materials. Fire or explosion could result.

∙ Do not install two power supplies in parallel

to a single input. Fire or damage to the device

could result. Be sure to connect a single

power supply to the device.

∙ Do not connect any terminal on the device

to an AC power line. Fire or electric shock

could result.

∙ Keep AC cord from being marred or crushed.

If the AC cord is fractured, ﬁre or electric shock

could result.

∙ Do not plug or unplug with wet hands.

Electric shock could result.

∙ Do not put any metal or ﬂammable material

into the device. Fire, electric shock, or device

trouble could result.

∙ Existing wiring such as chime wiring, etc. may

contain high voltage AC electricity. Damage to

the device or electric shock could result.

Wiring and installation must be done by a

qualiﬁed eletrician.

∙ When mounting the device on a wall or

ceiling, install the device in a convenient

location, but not where it could be jarred or

bumped. Injury could result.

∙ Do not put any metal or ﬂammable material

into the device. Fire, electric shock, or device

trouble could result.

WARNING ∙ Existing wiring such as chime wiring, etc. may

contain high voltage AC electricity. Damage to

the device or electric shock could result. Wiring

and installation must be done by a qualiﬁed

eletrician.

∙ When mounting the device on a wall or ceiling,

install the device in a convenient location, but

not where it could be jarred or bumped. Injury

could result.

∙ On devices with ground terminals, connect to

an earth ground. Otherwise ﬁre or malfunction

could result.

∙ On devices with plastic or real glass, do not put

high pressure on the glass. If fractured, injury

could result.

∙ On devices with LCD, if LCD is punctured, do

not allow contact with the liquid crystal inside.

Injury could result. If necessary, gargle your

mouth and clean your eyes or skin with clear

water for at least 15 minutes and consult your

doctor.

∙ Do not put anything on the device or cover the

device with cloth, silicone, glue, coating,

separate covering etc. Fire or device issues

could result.

∙ Do not install the device in any of the following

locations. Fire, electric shock, or device trouble

could result.

- Places under direct sunlight or places near

heating equipment that varies in temperature.

- Places subject to dust, oil, chemicals,

hydrogen sulﬁde (hot spring).

- Places subject to moisture and humidity

extremes, such as bathrooms, cellars,

greenhouses, etc.

- Places where the temperature is very low,

such as inside a refrigerated area or in front of

an air conditioner.

- Places subject to steam or smoke (e.g. near

heating or cooking surfaces).

- Where noise generating devices such as

dimmer switches or inverter electrical

appliances are closeby.

- Locations subject to frequent vibration or

impact.

∙ On devices with intercom, be sure to perform

a call test with low audio volume on both

intercom devices. A sudden call etc. may arrive

causing for example damage to your ear.

∙ If the device does not operate properly, unplug

the power supply.

Product specificaties

Merk:	DoorBird
Categorie:	Intercomsystemen
Model:	D2102V
Soort bediening:	Knoppen
Kleur van het product:	Roestvrijstaal
Gewicht:	1808 g
Breedte:	131 mm
Diepte:	48.75 mm
Hoogte:	313 mm
Materiaal behuizing:	Roestvrijstaal
Kleur:	Ja
Internationale veiligheidscode (IP):	IP65
AC-adapter ingangsspanning:	110 - 240 V
Montage gereedschap:	Ja
Beeldschermdiagonaal:	- "
Ondersteuning voor plaatsing:	Horizontaal
Kijkhoek, horizontaal:	180 °
Kijkhoek, verticaal:	90 °
Luidspreker:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Ingebouwde luidsprekers:	Ja
Certificering:	CE, IC, FCC
Correct gebruik:	Buiten
Ingebouwde microfoon:	Ja
Duurzaamheidscertificaten:	RoHS
Netwerkstandaard:	IEEE 802.3af
Aantal knoppen:	2 knoppen
Backlight toetsen:	Ja
Bewegingsdetectie-functie:	Ja
AC-adapter, uitgangsspanning:	15 V
Ophangsysteem voor aan de muur:	Ja
Power over Ethernet (PoE):	Ja
Bedrijfstemperatuur (T-T):	-25 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
Echo annulatie:	Ja