DNP DS-ID400 Handleiding

DNP Printer DS-ID400

Lees hieronder de 📖 handleiding in het Nederlandse voor DNP DS-ID400 (42 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/42

Operating Instructions

Before operating the unit, please read this manual thoroughly and

retain it for future reference.

Digital Photo Printer

DS-ID400

3-00D-053-11 (1)

Owner’s Record

The model and serial numbers are located at the rear.

Record these number in the space provided below.

Refer to these numbers whenever you call upon your

dealer regarding this product.

Model No. ____________________

Serial No. ____________________

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

This unit has no power switch.

When installing the unit, incorporate a readily accessible

disconnect device in the fixed wiring, or connect the power

plug to an easily accessible socket-outlet near the unit. If a

fault should occur during operation of the unit, operate the

disconnect device to switch the power supply off, or

disconnect the power plug.

For the customers in the U.S.A.

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause

harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital

device pursuant to Subpart B of Part 15 of FCC Rules.

Warning on power connection

Use a proper power cord for your local power supply.

1. Use the approved Power Cord (2-core mains lead) /

Appliance Connector / Plug that conforms to the safety

regulations of each country if applicable.

2. Use the Power Cord (2-core mains lead) / Appliance

Connector / Plug conforming to the proper ratings

(Voltage, Ampere).

If you have questions on the use of the above Power Cord

/ Appliance Connector / Plug, please consult a qualified

service personnel.

For the customers in Europe

The manufacturer of this product is Dai Nippon Printing

Co., Ltd., 1-1-1, Ichigaya Kagacho, Shinjuku-ku, Tokyo,

Japan.

The Authorized Representative for EMC and product

safety is DNP PHOTO IMAGING EUROPE SAS, ZI

PARIS NORD II - BP 51077, 22 AVENUE DES

NATIONS, PARC SILIC - VILLEPINTE, 95948

ROISSY CDG CEDEX, FRANCE.

This apparatus shall not be used in the residential area.

For the customers in Europe, Australia, and

New Zealand

WARNING

This is a Class A product. In a domestic environment, this

product may cause radio interference in which case the

user may be required to take adequate measures.

For kundene i Norge

Dette utstyret kan kobles til et IT-strømfordelingssystem.

For the customers in Europe

If you want to dispose this product, do not mix

with general household waste. There is a

separate collection system for used electronics

products in accordance with legislation under

the WEEE Directive (Directive 2002/96/EC)

and is effective only within European Union.

WARNING

Table of Contents 3

Table of Contents

Chapter 1 Overview

What This Product Can Do .............................................................6

Information Updates........................................................................7

Supported Storage Media and File Formats .................................7

Chapter 2 Preparation

Supplied Accessories .....................................................................9

Names and Functions of Parts .....................................................10

Front .................................................................................................... 10

Rear ..................................................................................................... 11

Installation......................................................................................12

Connecting the Power Cord ................................................................ 12

Loading Print Packs ......................................................................12

Handling Print Packs ........................................................................... 12

Loading Print Packs............................................................................. 13

Replacing Print Packs ...................................................................14

Removing the Print Cartridge.............................................................. 14

Loading Print Packs............................................................................. 14

Repairing Breaks in the Ink Ribbon .................................................... 15

Clearing Paper Jams ............................................................................ 15

Inserting Storage Media (SD Cards / USB Memory Devices) ....15

Startup and Shutdown ..................................................................16

Startup ................................................................................................. 16

Shutdown............................................................................................. 16

Chapter 3 Settings

Displaying the Menus....................................................................17

Main Menus......................................................................................... 17

Selecting the Language ................................................................18

Configuring Settings for ID Photo Prints ....................................18

Selecting the Layout............................................................................ 18

Specifying which Layouts to Display ................................................. 18

Selecting Color or Monochrome for Prints ......................................... 19

Configuring Trim Settings................................................................... 19

Adjusting the Exposure Automatically ............................................... 20

Printing the File Information............................................................... 20

Product specificaties

Merk:	DNP
Categorie:	Printer
Model:	DS-ID400
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	2700 g
Breedte:	203 mm
Diepte:	305 mm
Hoogte:	85 mm
Stroombron:	AC
Beeldscherm:	LCD
USB-poort:	Ja
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD,SDHC
Markt positionering:	Thuis & kantoor
Aantal USB 2.0-poorten:	1
Ondersteund beeldformaat:	JPG
Compatibele besturingssystemen:	Windows XP (32bit), Windows Vista (32/64bit), Windows 7 (32/64bit)
Maximale resolutie:	403 x 403 DPI
Printtechnologie:	Verf-sublimatie
Maximale printafmetingen:	4" x 6" (10x15 cm)
Fotopapier afmetingen (imperial):	4x6,3.5x4 "
Print snelheid (10x15 cm):	100 s
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent