DJI Zenmuse P1 Handleiding

DJI Niet gecategoriseerd Zenmuse P1

Lees hieronder de 📖 handleiding in het Nederlandse voor DJI Zenmuse P1 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 188 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

2021.04

v1.2

User Manual

ZENMUSE P1

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe

Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to

begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that section.

Printing this Document

This document supports high resolution printing.

Using This Manual

Legends

Warning Important Hints and Tips Reference

Caution

1. When not in use, store the ZENMUSETM P1 in the storage case and replace the desiccant packet

as necessary to prevent fogging the lenses due to excessive ambient humidity. If the lenses fog up,

the water vapor will usually dissipate after powering on the device for a while. It is recommended to

store the P1 in an environment with a relative humidity of less than 40% and temperature of 20±5° C.

2. DO NOT place the product under direct sunlight, in areas with poor ventilation, or near a heat

source such as a heater.

3. DO NOT repeatedly power the product on or o. After powering o, wait at least 30 seconds before

powering back on. Otherwise, the product life will be aected.

4. Under stable laboratory conditions, the P1 achieves an IP4X protection rating by IEC60529

standards. The protection rating is not permanent, however, and may reduce over an extended

period.

5. Make sure there is no liquid on the surface or in the port of the gimbal.

6. Make sure the gimbal is securely installed on the aircraft and the SD card slot cover is closed

properly.

7. Make sure the surface of the gimbal is dry before opening the SD card slot cover.

8. DO NOT remove or insert the SD card when taking a photo or recording a video.

9. DO NOT touch the surface of the lens with your hand. Be careful to avoid scratching the surface of

the lens with sharp objects. Otherwise, the quality of images may be aected.

10. Clean the surface of the camera lens with a soft, dry, clean cloth. DO NOT use alkaline detergents.

11. DO NOT press the lens release button while attaching the lens. DO NOT repeatedly disassemble

and assemble the lens unless necessary.

12. DO NOT plug or unplug the lens after powering on.

13. DO NOT plug or unplug the P1 after powering on. Press the power button on the aircraft to power

o instead of removing the P1 directly from the aircraft.

14. Make sure to use a storage case when transporting the P1 as the gimbal is a precision instrument.

Product specificaties

Merk:	DJI
Categorie:	Niet gecategoriseerd
Model:	Zenmuse P1
Kleur van het product:	Zwart
Gewicht:	800 g
Breedte:	166 mm
Diepte:	129 mm
Hoogte:	198 mm
Internationale veiligheidscode (IP):	IPX4
Maximale capaciteit van de geheugenkaart:	512 GB
Ondersteunde videoformaten:	MOV, MP4
Field of view (FOV) hoek:	63.5 °
Compatibele geheugenkaarten:	SD
Maximale beeldsnelheid:	60 fps
Land van herkomst:	China
Vermogensverbruik (max):	20 W
Beeldstabilisator:	Ja
Megapixels:	45 MP
Maximale beeldresolutie:	8192 x 5460 Pixels
ISO-gevoeligheid:	100,25600
Maximale videoresolutie:	3840 x 2160 Pixels
HD type:	4K Ultra HD
Compatibele producten:	DJI Matrice 300 RTK
Snelste camera sluiter snelheid:	1/2000 s
Langzaamste camera sluiter snelheid:	1 s
Maximum aperture number:	16
Minimum aperture number:	2.8
Bedrijfstemperatuur (T-T):	-20 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	-20 - 60 procent
Mechanisch kantelbereik:	-130 - 40 °
Mechanisch rolbereik:	-55 - 55 °
Mechanisch panbereik:	-320 - 320 °