DJI Lightbridge Handleiding

DJI Wifi-repeater Lightbridge

Lees hieronder de 📖 handleiding in het Nederlandse voor DJI Lightbridge (48 pagina's) in de categorie Wifi-repeater. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

DJI LIGHTBRIDGE

DJI LIGHTBRIDGEDJI LIGHTBRIDGE

User Manual

User Manual User Manual V1.02

V1.02

V1.02V1.02

2014.

2014.2014.

1010

Disclaimer

Disclaimer Disclaimer

Thank you for purchasing the DJI LIGHTBRIDGE. Please visit the DJI LIGHTBRIDGE page on www.dji.com

regularly to keep up with product information, technical updates and manual corrections. Information in this

manual is subject to change without notice in line with product upgrades and updates.

Users must comply with local radio transmission laws and regulations when using this product. In using this

product, you hereby agree to this disclaimer and signify that you have understood all points completely. When

assembling this product, follow all instructions carefully. The manufacturer and seller assume no liability for any

damage or injury arising from the use of this product.

DJI is a registered trademark of DJI. Names of product, brand, etc., appearing in this manual are trademarks or

registered trademarks of their respective owner companies. This product and manual are copyrighted by DJI

written consent or authorization of DJI.

Profile

Profile Profile

A complete DJI LIGHTBIRDGE comprises of an air system and a ground system. It is a high definition video

transmitter, flight controller On Screen Display (OSD) and supports remote controls using the 2.4GHz

frequency band As it is small, power efficient and highly sensitive, the DJI LIGHTBRIDGE can be used for .

many activities. The air system must be attached to the aircraft and the ground system must be connected to a

monitor to display the video and flight controller OSD information.

When the DJI LIGHTBRIDGE transmits the video and flight controller OSD information, the air system is the

transmitter while the ground is the receiv The air system pulls video from the camera and OSD information er.

from the flight controller then modulate it and transmits to the ground system. The ground system then s

receives the information, demodulates it and sends it to monitor or mobile device. The DJI LIGHTBRIDGE a

App, available for smart devices is required for an ideal viewing experience.

When the DJI LIGHTBRIDGE transmits the remote control signal the ground system works as transmitter a

while the air system works as a receiver. The ground system can connect to two remote controls, one for

aircraft and the other for gimbal control DJI flight control system with DBUS port is required as the built in . A

receiver only supports the DJI DBUS protocol.

* 2.4GHz remote controls must be connected correctly to the ground system. Incorrect connection may lead to

malfunction due to interference.

Product specificaties

Merk:	DJI
Categorie:	Wifi-repeater
Model:	Lightbridge
Connectiviteitstechnologie:	Bedraad
Frequentieband:	2.4 GHz
Aansluiting voor netstroomadapter:	Ja
Interface:	HDMI, AV, USB 2.0
Power LED:	Ja
Compatibele besturingssystemen:	Android 4.1.2+
Maximale overdrachtssnelheid van gegevens:	- Mbit/s