DITEC LUC40H Handleiding
DITEC
Automatische deuren
LUC40H
Lees hieronder de 📖 handleiding in het Nederlandse voor DITEC LUC40H (46 pagina's) in de categorie Automatische deuren. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/46
Entrematic LCU40H
Control panel installation manual for
automations with one or two 24V motors
(Translation of the original instructions)
www.entrematic.com
IP2246EN • 2018-03-23
36 35 34 33 32 31
30 2 3 4 9 13
+-LP - +LK 30 5 20 016 018
JR1
J13J14
24V~
COM
A
U
X
2
A
U
X
1
UP
DOWN
TRF
ENTER
ESC
USB
BAT KIT
SCHEDA AD INNESTO
SCHEDA AD INNESTO
F
U
S
E
F1
RDX
6ZENRS
ZENPRS
Trasformatore
Alimentazione
Motore 2
24V
Motore 1
Passo-passo
Apertura parziale
Antenna
Chiusura
automatica esterna
Apertura
Chiusura
Stop
Lampada stato
automazione
Lampeggiante
Elettroserratura
AUX1 AUX2
1
30 30
1
-
+
Uscita 24 V
-
+
Uscita 24 V
Arresto di sicurezza
Sicurezza in chiusura
24V
LN
Power supply
Motor 2 Motor 1
Flashing light
Electric lock
Step-by-step
Partial opening
24V output
24V output
Safety stop
Closing safety device
Antenna
Automatic external closing
Opening
Closure
Stop
Automation status
lamp
Transformer
2
IP2246EN
Contents
Subject Page
1. General safety precautions 3
1.1 Safety functions 4
2. EC Declaration of Conformity 4
3. Technical specifications 4
3.1 Applications 4
4. Installation and electrical connections 5
4.1 Maintenance 7
4.2 Standard installation 7
4.3 Standard installation diagram 8
5. Programming 9
5.1 Switching the display ON and OFF 9
5.2 Navigation keys 9
5.3 Menu map 10
6. Quick start-up sequences 12
7. Application examples 14
8. Commands 16
8.1 Inserting the plug-in boards 17
8.2 SOFA1-SOFA2 or GOPAVRS self-controlled safety edge 17
9. Outputs and accessories 18
10. Selections 19
11. Adjustments 20
11.1 Main menu 20
11.2 Second level menu - AT (Automatic Configurations) 21
11.2.1 Selecting the type of automation AT → AS and specific default settings 22
11.3 Second level menu - BC (Basic Configurations) 23
11.3.1 Additional BC level parameters that can be configured (available with AT → AA enabled) 23
11.4 Second level menu - BA (Basic Adjustment) 24
11.4.1 Additional BA level parameters that can be configured (available with AT → AA enabled) 26
11.5 Second level menu - RO (Radio Operations) 28
11.5.1 Additional RO level parameters that can be configured (available with AT → AA enabled) 29
11.6 Second level menu - SF (Special Functions) 30
11.6.1 Additional SF level parameters that can be configured (available with AT → AA enabled) 31
11.7 Second level menu - CC (Cycle Counter) 32
11.7.1 Additional CC level parameters that can be configured (available with AT → AA enabled) 33
11.8 Second level menu - EM (Energy Management) 33
11.8.1 Additional EM level parameters that can be configured (available with AT → AA enabled) 34
11.9 Second level menu - AP (Advanced Parameters) 34
11.9.1 Additional AP level parameters that can be configured (available with AT → AA enabled) 36
12. Diagnostics 38
13. Signals visualised on the display 40
14. Troubleshooting 45
Key
i
This symbol indicates useful information for the correct functioning of the product.
Factory settings
This symbol indicates instructions or notes regarding safety, to which special atten-
tion must be paid.
3
IP2246EN
This installation manual is intended for qualified personnel only.
Installation, electrical connections and adjustments must be performed in accordance
with Good Working Methods and in compliance with the present standards.
This product must only be used for the specific purpose for which it was designed.
Any other use is to be considered improper and therefore dangerous. The manufac-
turer cannot be held responsible for any damage caused by improper, incorrect or
unreasonable use.
Read the instructions carefully before installing the product. Incorrect installation
could be dangerous.
The packaging materials (plastic, polystyrene, etc.) should not be discarded in
the environment or left within reach of children, as they are a potential source
of danger.
Before installing the product, make sure it is in perfect condition.
Do not install the product in explosive areas and atmospheres: the presence of in-
flammable gas or fumes represents a serious safety hazard.
The safety devices (photocells, safety edges, emergency stops, etc.) must be
installed taking into account the applicable laws and directives, Good Working
Methods, installation premises, system operating logic and the forces developed by
the automation.
Before connecting the power supply, make sure the plate data correspond to those of
the mains power supply. An omnipolar disconnection switch with a contact opening
distance of at least 3 mm must be fitted on the mains supply.
Check that there is an adequate residual current circuit breaker and a suitable
overcurrent cut-out upstream of the electrical installation in accordance with Good
Working Methods and with the laws in force.
When requested, connect the automation to an effective earthing system that complies
with current safety standards.
During installation, maintenance and repair operations, cut off the power supply
before opening the cover to access the electrical parts.
The electronic parts must be handled using earthed antistatic conductive arms. The
manufacturer of the motorisation device declines all responsibility if component parts
not compatible with safe and correct operation are fitted.
Only use original spare parts when repairing or replacing products.
1. General safety precautions
Failure to observe the information given in this manual may lead to personal
injury or damage to the equipment.
Keep these instructions for future reference
Product specificaties
| Merk: | DITEC |
| Categorie: | Automatische deuren |
| Model: | LUC40H |
Heb je hulp nodig?
Als je hulp nodig hebt met DITEC LUC40H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Automatische deuren DITEC
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
Handleiding Automatische deuren
- Automatische deuren Alltronik
- Automatische deuren FAAC
- Automatische deuren Univer
- Automatische deuren Optex
Nieuwste handleidingen voor Automatische deuren
15 Oktober 2023
30 Januari 2023
30 Januari 2023
23 December 2022
30 Januari 2023
30 Januari 2023
30 Januari 2023
30 Januari 2023
30 Januari 2023
29 Januari 2023