Digicom PCI LAN 10-100 Handleiding

Digicom Netwerkkaart/adapter PCI LAN 10-100

Lees hieronder de 📖 handleiding in het Nederlandse voor Digicom PCI LAN 10-100 (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

PCI CARD 10/100

User’s Guide

Dear customer,

thank you for purchasing a Digicom product.

DESCRIPTION

With your Digicom PCI Card 10/100 network card you can connect your

PC to a Local Area Network regardless of its operating speed (10 or 100

Mbit/s).

Using PCI card 10/100 will bring several advantages thanks to its advanced

features and simple installation:

lPlug and Play

lAutosensing, operating speed is automatically detected as soon as cable

is plugged

lFull Duplex at 10 and 100Mbit/s

lWake On Lan function

lDriver support for most common operating systems

PACKAGE CONTENTS

lPCI Card 10/100

lUser Guide

lWake On Lan cable

lDriver diskette

PREFACE

The following installation rules should be respected in order to have the

best working order of the equipment and for the user’s safety.

ENVIROMENTAL CONDITIONS

ENVIROMENTAL TEMPERATURE RELATIVE HUMIDITY

from 0 to + 55°C from 5 to 95% n.c.

from 32 to 131°F

Rapid changes of temperature or humidity should be avoided (0,03°C/

min).

lDust, humidity, heat from direct sun light.

lObjects which irradiate heat. These could cause damage to the container

or other problems.

lObjects which produce a strong electtromagnetic ﬁeld (loudspeakers,

etc.)

lLiquids or chemical corrosive substances.

http://www.digicom.it

DECLARATION OF CONFORMITY

This product satisfies the basic requirements of Electromagnetic

Compatibility and Safety of the below indicated Directive:

l89/336/CEE of 3 May 1989 with subsequent modiﬁcations (Directive

92/31/CEE of April 28, 1992, Directive 93/68/CEE of July 22,1993 and

Directive 93/97/CEE of 29 October 1993).

l73/23/CEE of February 19, 1973 with subsequent modifications

(Directive 93/68 ECC of July 22, 1993).

CHECK REPORT

The equipment has been successfully tested according to the check

procedure indicated on the inside back cover of the user’s manual. It is in

conformity with the technical characteristics described in the users’ manual

supplied with the equipment.

WARRANTY

WARRANTY CLAUSES

lThe equipment has a warranty which covers manufacturing and

operating faults for the period indicated on the inside back cover of the

user’s manual.

lThe warranty is to be considered freight forward and the goods must

reach the address indicated below at customer’s expences.

lWarranty means the substitution or repairing of fault products. Working

hours used for repairing included in the warranty.

lThe estetic and the separable parts are not included in the warranty.

lThe warranty is not extended to equipments which have been subject

to misuse, improper installation, electric discharge or repaired by

unauthorized staﬀ.

TECHNICAL SPECIFICATIONS

lPCI Local Bus Rev. 2.0

l32 bit bus mastering PCI

lEarly transmit & receive interrupt support

lUp to 33MHz clock support

lRJ45 port

lCategory 3, 4, 5 cabling for 10BaseT

lCategory 5 for 100BaseTX

lIEEE802.3 for 10BaseT, IEEE802.3u for 100BaseTX

l10/100 Mbps auto-sensing

lFull duplex on 10 and 100 Mbps networks

lWake On Lan remote power on

lACPI, Advanced Conﬁguration Power Interface

lSleep mode left by keyboard or wake up packet

lAutomatic Bios I/O address allocation

lIRQ 0Ah mapped to Bios IRQ Setup

lWake On Lan through included cable

lBoot ROM socket

lActivity, Link, 10Mbps/100Mbps led indicators

l5 VDC, max 300mA

lOperating Temperature 0 to 55 C - 32 to 131 F°

lHumidity 10% to 95% non condensing

lCE Mark

lDriver support for Microsoft Windows® 3.11, Windows®, 98/95/95-

OSR2, Windows® NT 3.51/4.0, Microsoft Lan Manager, IBM LAN

Support, OS2, OS2/WARP, LAN Server, SCO Unix, SUN PC-NFS,

Artisoft LANtastic, Banyan VINES, DEC Pathworks, FTP PC/TCP, NCSA

TCP/IP, Novell NetWare 3.12, 4.x, 5.0, LAN Workplace, LAN Analyzer

HARDWARE INSTALLATION

Please refer to your PC documentation in order to correctly identify a Bus

Mastering PCI slot and the “5V Standby” connector for Wake On Lan

functionality. Also see the Setup/Bios documentation regarding PCI slots

and their settings.

To install the PCI Card 10/100, power oﬀ your PC and remove the chassis

cover. Next, select an unused PCI expansion bus slot and remove its

protective bracket. Carefully insert the card and press until all the edge

connectors are firmly seated inside the slot. Screw the card’s bracket

securely into the PC’s chassis and replace the cover.

If you are going to use the Wake On Lan capability, attach one end of the

3-pin Wake-on-LAN cable to the connector on the top edge of the card,

and the other end to the “5V Standby”

connector on the computer’s

motherboard.

Connect the PCI Card 10/100 to a

10Base-T or 100Base-TX hub or

switch using RJ45-RJ45 UTP cables

(Category 3, 4 or 5 for 10BASE-T;

Category 5 for 100BASE-TX).

The maximum allowable length of

10BASE-T or 100BASE-TX cable

connections is 100 meters (328 ft.).

SOFTWARE INSTALLATION

The PCI Card 10/100 should

be automatically configured by

the PCI computer’s BIOS

setup program.

However, if you have an

older PCI computer, you

may have to change the

computer’s BIOS settings

to accomplish this.

Please refer to section

“Setup and Diagnostics”.

Windows® 98/95

At startup your PC will

automatically detect a new

hardware and ask for the

drivers.

Click on Next.

Insert the driver disk into the

ﬂoppy drive, type A:\ and click on

Browse. Select Win95 or Win98

folder.

Click on OK.

Follow the instructions to

complete the installation.

OTHER OPERATING SYSTEMS OR APPLICATIONS

All drivers regarding supported operating systems and applications are

located in dedicated folders on the diskette.

Refer to the Release.txt ﬁle on the diskette for more details and general

informations.

Where needed a *.TXT ﬁle provides speciﬁc installation and use details.

SETUP AND DIAGNOSTICS

From the DOS prompt (not from a DOS window under Windows®) run

DIAG.EXE, available in the SETUP folder on the diskette.

Through View current conﬁguration and Set New Conﬁguration menues

you can check the current settings and modify them to match your needs.

Note: IRQ and I/O Base are controlled by the PC’s Bios.

Test and Diagnostic functions are available for testing and troubleshooting.

Please refer to DIAG.TXT ﬁle for more detailed informations.

LED DESCRIPTION

Link 10

On when the card is correctly connected

and operating at 10Mbit/s.

Link 100

On when the card is correctly connected

and operating at 100Mbit/s.

ACT

Flashing when data is transmitted or

received.

Pin assignment

1 RD+

2 RD -

3 TD+

4 not used

5 not used

6 TD -

7 not used

8 not used

RJ45

Wake on LAN

Product specificaties

Merk:	Digicom
Categorie:	Netwerkkaart/adapter
Model:	PCI LAN 10-100
Gebruikershandleiding:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Plug and play:	Ja
Voldoet aan industriestandaarden:	IEEE 802.3, IEEE 802.3u
Hostinterface:	PCI
Maximale overdrachtssnelheid van gegevens:	100 Mbit/s
Ondersteunde data-overdrachtsnelheden:	10/100 Mbps
Link/Act LED:	Ja
Full duplex:	Ja
Wake-on-LAN:	Ja
Aantal poorten:	1