DeWalt DWMT70773L Handleiding

DeWalt Schroefmachine DWMT70773L

Lees hieronder de 📖 handleiding in het Nederlandse voor DeWalt DWMT70773L (44 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/44
DWMT70773L
1/2" Impact Wrench Heavy Duty
Clé à chocs de 12,7 mm (1/2 po) service intensif
Llave de impacto de 12,7 mm (1/2”) para servicio pesado
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT • www.dewalt.com
2
English
A. 1/2" Square Drive
B. Trigger
C. Forward/Reverse Switch
D. Ergonomic Handle
E. 1/4” Air Inlet
SPECIFICATIONS
MODEL
DWMT70773L
SQUARE DRIVE
1/2"
CLUTCH TYPE
Twin Hammer
MAXIMUM TORQUE (REVERSE)
650 Ft.Lbs (880 Nm)
FREE SPEED (@90PSI)
7500 RPM
BLOWS PER MINUTE
1100 BPM
NET WEIGHT
4.63 LBS (2.1Kg.)
EXHAUST TYPE
Handle
AVERAGE AIR CONSUMPTION
FREE SPEED
41.5SCFM (19.6 L/s)
5.9 CFM (2.8 L/s)
AVERAGE AIR CONSUMPTION AT
LOAD
27.2SCFM (12.8 L/s)
3.9 CFM (1.8 L/s)
AIR INTLET SIZE
1/4" NPT(F)
RECOMMENDED HOSE SIZE
3/8" (10MM)
MAX. AIR PRESSURE
90 PSI
DWMT70773L
1/2" IMPACT WRENCH HEAVY DUTY
F. Shock Resistant Housing
Bumpers
G. Composite Body
H. Twin Hammer Mechanism
I. Exhaust
J. Adjustable Power Dial
B
A
H
G
D
E
J
IE
FIG.1
C
F
3
English
Denitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, result in will death
or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, result in could death
or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, result in may minor
or moderate injury.
CAUTION: Used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, result in may property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY D
e
WALT TOOL, CALL US TOLL FREE AT:
1-800-4-D
e
WALT (1-800-433-9258)
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains chemicals
known to the State of California to cause cancer, birth defects or
other reproductive harm. Some example of these chemicals are:
• Leadfromlead-basedpaints
• Crystallinesilicafrombricksandcement
and other masonry products
• Arsenicandchromiumfromchemically-treatedlumber
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, al ways wear approved, OSHA/MSHA/NIOSH
properly fit ting face mask or res pi ra tor when us ing such tools.
When using air tools, basic safety precautions should always be
followed to reduce the risk of personal injury.
WARNING: This product contains chemicals, known to the
State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
SAVE THESE INSTRUCTIONS
WARNING:
Improper operation or maintenance of this product
could result in serious injury and property damage.
Read and understand all warnings and operating
instructions before using this equipment. When using
air tools, basic safety precautions should always be
followed to reduce the risk of personal injury.
WARNING:
Read and understand this instruction manual and tool labels
before installing, operating or servicing this tool. Keep these
instructions in a safe accessible place.
Operators and others in work area must wear ANSI Z87.1 CAN/
CSA Z94.3 approved safety glasses with side shields.
Operators and others in work area must wear ear protection.
Oil daily for optimal performance.

Product specificaties

Merk: DeWalt
Categorie: Schroefmachine
Model: DWMT70773L

Heb je hulp nodig?

Als je hulp nodig hebt met DeWalt DWMT70773L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schroefmachine DeWalt

DeWalt

DeWalt DWD220 Handleiding

29 Augustus 2024
DeWalt

DeWalt DW256 Handleiding

15 Juli 2024
DeWalt

DeWalt DC800 Handleiding

3 Juli 2024
DeWalt

DeWalt DCF630 Handleiding

12 Juni 2024
DeWalt

DeWalt DW284 Handleiding

10 Juni 2024
DeWalt

DeWalt DW281 Handleiding

10 Juni 2024
DeWalt

DeWalt DW267 Handleiding

10 Juni 2024
DeWalt

DeWalt DCF913 Handleiding

9 Juni 2024
DeWalt

DeWalt DW0521 Handleiding

9 Juni 2024
DeWalt

DeWalt DCF513 Handleiding

27 Februari 2024

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine

Milwaukee

Milwaukee M12 BDD Handleiding

16 November 2024
Milwaukee

Milwaukee M18 BDD Handleiding

16 November 2024
Hazet

Hazet 9022 P-2 Handleiding

15 November 2024
Hazet

Hazet 9021-3 Handleiding

15 November 2024
Hazet

Hazet 9012MT Handleiding

15 November 2024
Hazet

Hazet 6001-3.0/3 Handleiding

12 November 2024
Hazet

Hazet 6001-1.5/3 Handleiding

12 November 2024
Hazet

Hazet 6004CT-3 Handleiding

12 November 2024
Hazet

Hazet 9212SPC-010 Handleiding

12 November 2024
Ryobi

Ryobi One+ RSD18 Handleiding

5 November 2024