Denver IR-110 Handleiding

Denver Radio IR-110

Lees hieronder de 📖 handleiding in het Nederlandse voor Denver IR-110 (44 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

ENGLISH

GETTING STARTED

Powering ON/OFF

1. When you first connect the unit to the mains socket, the unit will be in STANDBY

mode after showing “Welcome to Internet Radio STARTING….” (F.1)(F.2)

2. Press the Standby button on the unit or remote control to switch the unit on.

3. Press the Standby button on the unit or remote control to switch the unit back

to standby on mode.

Selecting Modes

Press the button repeatedly on the unit or remote control to switch between MODE

Music player, DAB radio, FM radio, AUX In and Internet radio modes.

Welcome to

Internet Radio

STARTING

(F.1)

00/00/000

00 : 00

(F.2)

When the unit is idle for approximately 15 minutes, it will automatically switch to standby.

To switch the unit off completely, remove the mains plug from the main socket.

Please turn the unit off completely to save energy when not in use.

Network

1. During mode, press the buttons to select and press the button to System Settings / Network SELECT

confirm.

2. Press the buttons to select from the following settings, and then press the button to confirm. / SELECT

Network wizard SSID – select the desire wireless network.

Rescan – Scan for available networks.

Wired – select wired network.

Manual config – select wired/wireless network with DHCP enable/disable.

PBC Wlan setup Select on the unit and press the button on the modem device that you wish to PBC PBC

connect with. Press the button to continue.SELECT

View settings Display the setting on the unit.

Wlan region Select a country of your choice.

Manual settings Select wired/wireless network with DHCP enable/disable.

NetRemote

PIN Setup

To define a PIN number to be entered before being able to connect to the unit

remotely over a network

Network profile View the connected network.

Clear network

settings

To delete the connected network memory in Network profile.

Keep network

connected

To define whether remains connected to its network in Standby mode and when not in

Network radio mode. This is necessary for remote operation and audio streaming in Music

Player mode.

3. Press the button on the unit or on the remote control to cancel the setting and return back to the BACK

previous menu.

ENGLISH

After the system reset, all the tuned stations, DAB & FM preset stations will be erased.

Setting the Alarm

1. Press the button on the remote control, the display shows “Alarm (1 or 2): Off [hh:mm]”.ALARM

2. Press the buttons to select the Alarm number (1 or 2) and then press the button to start the / SELECT

setting of the following parameters.

For the following setting, press the buttons to select then press the button to confirm. / SELECT

Enable Off/ Daily/ Once/ Weekends/ Weekdays

Time (Alarm On time)

Mode Buzzer/ Internet radio/ DAB/ FM

Preset Last Listened/ (Preset station)

Volume Muted, 1-31

Save Save and confirm the alarm setting

Finally, select “Save” and press the button to save the alarm setting. When the alarm is set, the alarm icon SELECT

will appear on the display during standby mode.

To turn off the alarm when it sounds, press the STANDBY or button.ALARM

During Standby mode, press the button repeatedly to turn the saved Alarm on/off.ALARM

Factory Reset

There may be times when you need to reset your unit back to the factory settings especially when you have moved

house. If you experience reception problems you may want to reset and try again.

If you move to another part of the country and pick up the local and national DAB+ stations in that area, your

previously tuned channels may no longer be available.

1. During System settings mode, press the buttons to select “ / Factory reset”, and press the button to SELECT

confirm.

2. Press the buttons to select , and press the button to confirm or select to cancel. / Yes SELECT No

Product specificaties

Merk:	Denver
Categorie:	Radio
Model:	IR-110
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	680 g
Breedte:	- mm
Diepte:	- mm
Hoogte:	- mm
Gebruikershandleiding:	Ja
Stroombron:	DC
Aan/uitschakelaar:	Ja
Touchscreen:	Nee
Ondersteund audioformaat:	AAC, MP3, RealAudio, WMA
Type aansluitplug:	3,5 mm
Ethernet LAN:	Ja
Inclusief AC-adapter:	Ja
Alarm functie:	Ja
Snooze functie:	Ja
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	2 W
Aantal ingebouwde luidsprekers:	1
Volumeregeling:	Draaiknop
Hoofdtelefoonuitgangen:	1
Aansluiting voor netstroomadapter:	Ja
Soort tuner:	Digitaal
Wekker:	Ja
Klok functie:	Ja
MP3 afspelen:	Ja
AUX ingang:	Ja
Internet radio:	Ja
Ondersteunde frequentiebanden:	FM
Radio:	Internet
Inclusief RDS tuner:	Ja
Voeding, voltage ingang:	230 V
Wifi:	Ja
AC-ingangsfrequentie:	50 Hz
Slaaptimer:	Ja
Type beeldscherm:	LCD