Denver DCH-240 Handleiding

Denver Drone DCH-240

Lees hieronder de 📖 handleiding in het Nederlandse voor Denver DCH-240 (1 pagina's) in de categorie Drone. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Charging

Connect one side of the USB connector with the battery, and the other side into any

USB port of computer or a smartphone charger (not included).

-03-

-05-

-06-

-04-

-01- -02-

Notice:

1 Instructions

Please read the user handbook carefully and then keep it in a safe place for future

consultation and maintenance.

1.1 Important Notice

(1) This product is not a toy, it's a piece of complicated equipment which integrated with

professional knowledge by mechanic, electric, air mechanics, high-frequency transmitter

and so on, so it should be installed correctly and adjusted to avoid any accidents.

The owner must always operate in a safe manner, if improper operation that caused

human injured or property damage, then we DENVER ELECTRONICS A/S accept no

liability for any safety duties from operation. As we have no control over the way they

maintained, used and operated.

(2) This product is not suitable for users under 14 years of age.

(3) The use of the drone may be prohibited in some areas like train stations, airports,

aircrafts, inhabited areas etc. You should check with the authorities whether the use of

the drone is permitted in some public or private areas. Always use the drone bearing in

mind not to breach people's privacy. We exclude liability for any wrong use of the drone.

(4) We DENVER accept no liability for any safety duties or fines arising from operation,

usage or miscontrol after the sale of products. Warranty does not cover if drone crashes

and get damaged.

1.2 Safety Precautions

Keep away from crowd when flying, since drone flight is a high-risk hobby. Misassembled

or broken main frame or defective electronic equipment or unskilled operation may cause

accidents of machine damaged or injured. Please pay special attention to safety operation.

(1) Keep away from people and obstacles

"The flying speed and status of the drone is uncertain, so it may cause potential danger."

When choosing a flying site should stay clear of buildings, trees and power lines. AVOID

flying in or near crowded areas. Meanwhile avoid flying in rain, storms, thunder and

lightening to protect machinery and parts out of damage.

(2) Keep away from humid environments

Inside of drone is made up of precise electronic components. Stay away from humidity or

water vapor to protect machinery and parts.

(3) Safety operation

Please fly your drone according to your physical status and flight skill. Fatigue, listlessness

and mis-operation will increase possibilities of accidental hazard.

(4) Keep away from rotating blades

Keep your face and body as well as all spectators away from the rotating blades. The

spinning blades of a model of this type can cause serious injury.

(5) We recommend flying the drone below 10 meters of height.

(6) Keep away from heat

A drone is made up of metal, fiber, plastic, electronic components, etc. Keep it away from

heat and sunshine to avoid distortion, and damage.

1.3 Check List Before First Flight

(1) Flying field should be in an open space and we suggest at least 5M length *5M wide

*3M height.

(2) Make sure the receiver and transmitter is fully charged.

(3) Please strictly obey the order of turn-on, turn-off before operation. When starting your

flight, first turn on the transmitter, and connect the battery with drone last; When finishing

your flight, please disconnect the battery from your drone first, turn off transmitter last.

An upset in the order of connection may cause your drone loose control to threaten

yourself and others safely. Please follow a correct habit of turn-on and turn-off.

(4) Make sure the connection is solid between battery or motor. The ongoing vibration

may cause bad connection of power terminal and make the drone uncontrollable.

Drone

Replacing the damaged blades:

Your set will come with 4 spare rotors, two type A (A1=A2)

and two type B . You will see the "A" and "B" word (B1=B2)

on the canopy, then put the rotor on the motor

accordingly

Battery cover3 x 1.5V AA

batteries

Battery Installation & Charging

Controller

Battery installation should be done under adult supervision only!

Do not mix old and new batteries.

Do not mix different types of batteries.

To install batteries: Open the cover of battery case, insert 3 x 1.5V AA batteries,

according to indicated polarity (batteries not included).

For age 14+

Denver DCH-240

WWW.DENVER-ELECTRONICS.COM

www.facebook.com/denverelectronics

Please read this instruction manual carefully before using the product

Standard Operation Steps

3. Place the drone on a flat

surface

4. Push the throttle up and

down, a beep will sound:

controller has connected

with the drone

(LED lights on the drone stops flashing)

2. Turn on the drone

(LED lights on the drone flashes slowly)

1. Turn on the controller

Headless Mode

Start / Quit Headless Mode

Press the button on controller (as picture) you will hear beep sounds, then you get into

headless mode and lights flash on the drone. Press it again to quit.

At the moment when you start headless mode, the direction that controller is pointing

to will be fixed as the directions of drone. No matter how you rotate the drone, the front

direction won’t change accordingly.

One Key Reverse

Press and hold this button (as picture), and you will activate

One Key Reverse and the drone will now attempt to fly back

towards its starting direction.

If you want to deactivate this mode, then push the

right joystick (Rudder) to any direction.

Note: The drone will not land automatically, you still

need to control the height of the drone when using

the one key reverse flying mode.

ENGLISH

Remote Control

6. Press [Take-off], drone flys

up and hovers at a fixed height;

Press [Land], drone lands on

the ground and motors stop.

Press [Emergency], all motors

stop and drone fall down directly

Calibration Reset (Very important!)

Before first flying, Calibration Reset is necessary to be done,

to make sure the drone will fly stably: Pull the throttle and rudder to

Bottom Left corner at the same time for 3 secs, the LED lights on

the drone flashes quickly, then let go the throttle and rudder.

The LED lights on the drone stops flashing and keeps on.

Calibration Reset complete.

Front

Left Right

Back

Take Photo & Video

1. Insert the microSD card correctly into the camera when the drone is OFF.

2. Connect the camera to the drone by the standard power wire.

3. Power on the drone and connect it to the remote controller as per ‘Standard Operation

Steps’ .

4. When the drone is in the air, press the button, then one photo will be taken andPHOTO

Main Accessories

Blade Blade guards Landing feetLi-po Battery

Remote controller

USB Charge cable

Flips and rolls

After you have the basics of flying, you’re ready to learn flip and roll your drone.

To perform a flip or roll, press the button, make sure the drone is at least 3 meters offFlip

the ground and quickly push the Rudder, in either direction to make the drone flip or roll.

Once the manoeuvre is completed, steady the drone.

Note: Limited by the payload, the camera must be removed before performing a flip or roll.

5. To start motors (3 methods):

a. Push the throttle to the top

position and release it quickly.

b. Press button ‘ ’Start motors

c. Pull the Throttle to the bottom

left corner and Rudder to bottom

right corner at the same time.

Camera

saved into the microSD card (NOT included!) automatically. Meanwhile, the indicator

light inside the camera makes a quick flash.

5. Press and hold the button, the camera will start recording and the indicator lightVIDEO

inside the camera keeps flashing. Press it again, the video will be saved into the microSD

card and camera stops recording.

6. To enjoy the photo and video captured,

power off the drone first and remove the microSD

card from camera, then connect it to any computer.

-07-

Electric and electronic equipment and included batteries contains materials, components and

substances that can be hazardous to your health and the environment, if the waste materials

(discarded electric and electronic equipment and batteries) are not handled correctly.

Electric and electronic equipment and batteries are marked with the crossed out trash can

symbol, as below. This symbol signifies that electric and electronic equipment and batteries

should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and

designated facility. In this manner you make sure that the batteries are recycled in

accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and

batteries can either be submitted free of charge at recycling stations and other collection

sites, or be collected from the households. Additional information is available at the technical

department of your city.

Hereby, Inter Sales A/S declares that the radio equipment type DENVER DCH-240 is in com-

pliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available

at the following internet address: Please enter: www.denver-electronics.com and then click the

search ICON on topline of website. Write modelnumber: dch-240. Now enter product page,

and red directive is found under downloads/other downloads.

Operating Frequency Range: 2458 MHz - 2473 MHz

Max Output Power: 7.4 W

Imported by:

DENVER ELECTRONICS A/S

Omega 5A, Soeften

DK-8382 Hinnerup

Denmark

www.facebook.com/denverelectronics

1. Power ON/OFF

2. Photo / Video

Photo: short press

Video: long press

7. Headless / Reverse

4. Left joystick (Throttle)

(Ascend/Descend/

turn left/turn right)

10. Turn left/right trim

8. Emergency stop

6. Start motors

3. Flip

5. Right joystick

(Rudder)

(Forward/Backward/Leftward/Rightward)

13. Forward/Backward trim

11. Leftward / Rightward trim

9. Take off / Land

12. Speed Down

14. Speed Up

Product specificaties

Merk:	Denver
Categorie:	Drone
Model:	DCH-240
Kleur van het product:	Black, Orange
Breedte verpakking:	400 mm
Diepte verpakking:	272 mm
Hoogte verpakking:	88 mm
Soort:	Quadcopter
Oplaadtijd:	60 min
Capaciteit van de accu/batterij:	300 mAh
Frequentieband:	2.4 GHz
Ondersteunde video-modi:	480p
Meegeleverde kabels:	USB
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Accu/Batterij voltage:	3.7 V
Maximale gewichtscapaciteit:	- kg
Type processor:	Nee
Geheugenkaart slot(s):	Ja
Maximale afstand:	30 m
Aantal kanalen:	4 kanalen
Compatibele batterij grootte:	AAA
Inclusief geheugenkaart:	Nee
Batterijtechnologie:	Lithium
Producten per intermodale container (40 ft - High Cube):	2622 stuk(s)
Aantal batterijen (transmitter):	3
Aantal propellers:	4 propellers
Maximale snelheid:	- m/s
Maximale vliegtijd:	8 min
Aantal assen:	6
Accutechnologie transmitter:	Alkaline
Functie voor automatisch opstijgen:	Ja
Producten per intermodale container (45 ft - High Cube):	6372 stuk(s)
Functie voor automatisch terugkeren:	Ja