Denon DJ Axis 8 Handleiding

Denon DJ Speaker Axis 8

Lees hieronder de đź“– handleiding in het Nederlandse voor Denon DJ Axis 8 (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 96 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
User Guide English ( 2 – 5 )
Guía del usuario Español ( 6 – 9 )
Guide d’utilisation Français ( 10 – 13 )
Guida per l’uso Italiano ( 14 – 17 )
Benutzerhandbuch Deutsch ( 18 – 21 )
Appendix English ( 22 – 23 )
2
User Guide (English)
Introduction
Box Contents
Axis Loudspeaker User Guide
Power Cable Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denondj.com.
Setup / Connection Diagrams
You can set up your Axis loudspeaker in one of two ways:
Important: Please also see the following Important Safety Instructions chapter.
• Flat: Set the loudspeaker directly on a flat, stable surface (the floor or a low, sturdy table).
You can stack multiple Axis loudspeakers in a column, but make sure that all of them are
of the same model (Axis 8 or Axis 12) and that each loudspeaker’s feet are placed firmly
in the 4 sockets of the unit beneath it.
• Pole-Mounted: Carefully lift the loudspeaker and place the 36 mm hole in its bottom
panel over a standard 35 mm pole or speaker stand.
See the following examples of how to integrate the loudspeaker into your setup.
Note: Items not listed in Introduction > Box Contents are sold separately.
Example 1: 1 loudspeaker with vocal microphone and media player
Connect a dynamic microphone to Input 1 using an XLR or 1/4” (6.35 mm) TRS cable. Make
sure the Line/Mic Selector is set to Mic. Connect a media player (smartphone, tablet, MP3
player, etc.) to Input 2’s RCA connectors using a 1/8”-to-RCA (3.5mm-to-RCA) cable.
Note: Use only dynamic microphones with the loudspeaker unless you are also using an
external phantom power supply.
Dynamic
microphone
Smartphone,
tablet,
MP3 player,
etc. Power
3
Example 2: 2 loudspeakers with mixer
Connect the left and right output of your mixer to Input 1 of each loudspeaker using XLR or
1/4” (6.35 mm) TRS cables. Make sure the Line/Mic Selectors are set to Line.
Tip: To send the same mix to both loudspeakers, connect both channels of your mixer to the
Inputs 1 and 2 of one loudspeaker, set its Input 1/Mix Selector to Mix, and then connect that
loudspeaker’s Thru Output to Input 1 of the other loudspeaker. Both loudspeakers will then
play identical summed mono mixes.
Tip: To add extension loudspeakers in a “daisy chain” configuration, connect the Thru Output
to the input of your additional loudspeaker. Be sure to set the Input 1/Mix Selector to the
desired setting.
Example 3: 1 subwoofer and 2 loudspeakers with mixer
Using XLR or 1/4” (6.35 mm) TRS cables, connect the left and right output of your mixer to the
inputs of your subwoofer, and then connect each high-pass output of the subwoofer to
Input 1 of each loudspeaker. Make sure the Line/Mic Selectors are set to Line.
Power Power
Mixer
Power
Mixer
Subwoofer
Power

Product specificaties

Merk: Denon DJ
Categorie: Speaker
Model: Axis 8

Heb je hulp nodig?

Als je hulp nodig hebt met Denon DJ Axis 8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Denon DJ

Denon DJ

Denon DJ Axis 12 Handleiding

26 Juni 2023
Denon DJ

Denon DJ Axis 8 Handleiding

21 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kramer

Kramer Tavor 8-Sub Handleiding

21 November 2024
Kramer

Kramer Galil 6-AW Handleiding

21 November 2024
Extron

Extron SM 28 Handleiding

21 November 2024
JBL

JBL RM10 Handleiding

20 November 2024
JBL

JBL Performance IS6 Handleiding

20 November 2024
JBL

JBL Power P-Kit Handleiding

20 November 2024
JBL

JBL Performance P941 Handleiding

20 November 2024
JBL

JBL Performance P52OWS Handleiding

20 November 2024
JBL

JBL Performance PC600 Handleiding

20 November 2024
JBL

JBL Performance IS6DT Handleiding

20 November 2024