Delta Ohm HD25.2 Handleiding

Delta Ohm Meetapparatuur HD25.2

Lees hieronder de 📖 handleiding in het Nederlandse voor Delta Ohm HD25.2 (32 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
Our instruments' quality level is the results of the product continuous development. This
can bring about differences between the information written in this manual and the
instrument that you have purchased. We cannot entirely exclude errors in the manual, for
which we apologize.
The data, figures and descriptions contained in this manual cannot be legally asserted. We
reserve the right to make changes and corrections without prior notice.
REV. 1.0
14th Nov. 2006
HD25.2
- - 2
HD25.2 - Turbidimeter
1. Connectors
2. ESC key: in the menu, cancels the current setting.
3. MEM key: stores the currently displayed screen.
4. Battery symbol: indicates the battery level. The symbol does not appear when the external
power supply is connected.
5. Line for symbols and comments.
6. Main display line.
7. ON-OFF key: turns the instrument on and off. When pressed together with the  key, disables
the automatic turn off.
8. Measurement piece.
9. MENU key: allows access to and exit from the menu. When pressed together with the ENTER
key, starts the calibration procedure.
10. ENTER key: in the menu, confirms the current selection. When pressed together with the
MENU key, starts the calibration procedure.
11. MEAS key: performs the selected measurement. Use the arrows ( and  ) to choose the type
of measurement before pressing the MEAS key.
12.  key: selects the type of measurement. When pressed together with the ON/OFF key, disables
the automatic turn off. In the menu, increases the current value.
13. Secondary display line.
14.  key: selects the type of measurement. In the menu, decreases the current value.
15. PRINT key: prints the data on the current screen. It uses the serial communication port
RS232C or the USB 2.0 port.
- - 3
HD25.2 Connectors
16. Power supply input 12Vdc/1A for ∅ 5.5mm - 2.1mm connector.
17. USB2.0 connector - type B.
18. RS232C serial port, sub D 9-pole connector.

Product specificaties

Merk: Delta Ohm
Categorie: Meetapparatuur
Model: HD25.2

Heb je hulp nodig?

Als je hulp nodig hebt met Delta Ohm HD25.2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Meetapparatuur Delta Ohm

Delta Ohm

Delta Ohm HD25.2 Handleiding

27 Maart 2024
Delta Ohm

Delta Ohm HD32.8.16 Handleiding

20 Juni 2023

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Testec

Testec TT-CC 550 Handleiding

14 November 2024
Eastron

Eastron SDM630 Handleiding

14 November 2024
GW Instek

GW Instek PEL-3032E Handleiding

14 November 2024
Klein Tools

Klein Tools ET19 Handleiding

12 November 2024
Voltcraft

Voltcraft VC-55 LCD SE Handleiding

11 November 2024
Hikmicro

Hikmicro Eco-V Handleiding

11 November 2024
Testboy

Testboy TB115 Bit Handleiding

11 November 2024
Uni-T

Uni-T UT673PV Handleiding

5 November 2024
Sauter

Sauter 281-301 Handleiding

3 November 2024
Sauter

Sauter TVL-XL Handleiding

3 November 2024