Dell PowerEdge 1855 Handleiding

Dell Server PowerEdge 1855

Lees hieronder de 📖 handleiding in het Nederlandse voor Dell PowerEdge 1855 (78 pagina's) in de categorie Server. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/78

Dell™PowerEdge™1855SystemsInstallationandTroubleshootingGuide

Introduction

Indicators, Codes, and Messages

Finding Software Solutions

Running System Diagnostics

Troubleshooting Your System

Installing System Options

Getting Help

DIP Switch Settings and Connectors

I/O Ports and Connectors

Notes, Notices, and Cautions

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the "Glossary" in the User's Guide.

Information in this document is subject to change without notice.

©2005DellInc.Allrightsreserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerConnect, PowerVault, PowerApp, and Dell OpenManage are

trademarks of Dell Inc.; Intel, Pentium, and Celeron are registered trademarks of Intel Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any

proprietary interest in trademarks and trade names other than its own.

Initial release: 20 August 2004

Last revised: 30 June 2005

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Back to Contents Page

 DIP Switch Settings and Connectors

Dell™PowerEdge™1855SystemsInstallationandTroubleshootingGuide

DIP Switch Settings—AGeneralExplanation

Server Module Board DIP Switch

Server Module Board Connectors

Disabling a Forgotten Password

This section provides detailed information about the sever-module board DIP switch settings. It also provides some basic information on switches and

describes the connectors on the various boards in the system.

 —DIP Switch Settings AGeneralExplanation

DIP switches provide a convenient and reversible way of reconfiguring the circuitry on a printed circuit board. When reconfiguring the system, you may need to

change DIP switch settings on circuit boards or drives.



DIP Switches

DIP switches are small blocks on a circuit board with one or more slide switches emerging from them. Each slide switch on the DIP switch is designated by a

number. To change a DIP switch setting, move the appropriate slide switch to either the "on" or "off" position. FigureA-1 shows an example of a DIP switch.

Figure A- 1. Example DIP Switch

FigureA-2 shows the location and default settings of the sever-module board DIP switch. See TableA-1 for information about the DIP switch designations,