Deaf Bonce Machete ML-12A Handleiding

Deaf Bonce Subwoofer Machete ML-12A

Lees hieronder de 📖 handleiding in het Nederlandse voor Deaf Bonce Machete ML-12A (12 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
https://alphard.audio
ACTIVE SUBWOOFER
АКТИВНЫЙ САБВУФЕР
3
Step 1. Connect one end of the power cable from (+) terminal of the battery and the second end to the amplifier terminal marked
with +12V. Do not forget to protect positive power cable with appropriate fuse.
Step 2. Connect one end of the power cable from (-) terminal of the battery and the second end of the grounding cable to the
terminals marked with GND.
Step 3. Connect one end of the cable to the Remote output terminal at the HU and the second end to the amplifier terminal marked
with REM IN.
Step 4. Connect one end of the RCA cable to the RCA output terminal s at the HU and the second end to the amplifier RCA input
terminals marked with INPUT.
S subwoofer to battery and head unittandart wiring diagram of active
Not more than 40 cm
EN
1 . I N T R O D U C T I O N
2 . S A F E T Y I N S T R U C T I O N S
3 . W I R I N G D I A G R A M S
Thank you for purchasing of this Deaf Bonce product! Our company is committed to the creation of extremely loud sound
systems with no loss of quality.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.
1. Fasten the subwoofer properly when installing it in the vehicle. If the component is disconnected during driving, it may
cause serious damage to the passengers of the vehicle or another vehicle.
2. Before installing the components, if possible store the product in its original package to avoid accidental damage to the
product.
3. Be careful when installing or dismantling of the subwoofer! Do not let the subwoofer drop to avoid damage of its
moving parts.
4. When working with tools follow safety rules.
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
6. Make sure that the location of the subwoofer does not hinder the proper operation of mechanical and electrical devices
of the vehicle.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 °C (41F) to +40 °C (104F). In case of moisture condensation, let the product
to dry.
8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel
pipe or other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are firmly fixed and protected over the entire length.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and re.
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!


Product specificaties

Merk: Deaf Bonce
Categorie: Subwoofer
Model: Machete ML-12A

Heb je hulp nodig?

Als je hulp nodig hebt met Deaf Bonce Machete ML-12A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Deaf Bonce

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer