Deaf Bonce Hannibal MH-81 v2 Handleiding

Deaf Bonce Speaker Hannibal MH-81 v2

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Deaf Bonce Hannibal MH-81 v2 (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Hannibal series
MH- 1v28
http://alphard.audio
MIDRANGE SPEAKERS
9. Information on disposal of the electrical and electronic equipment
1. Introduction
5. Speciļ¬cations
7. Box contents
2. Safety instructions
3. Wiring diagrams
6. Dimensions
8. Warranty and maintenance info
(for the European countries with separate waste collection)
4. Filtering, recommended ampliļ¬er settings
2
C O N T E N T S EN
1 . I N T R O D U C T I O N
4. When working with tools follow safety rules.
3. Be careful when installing and dismantling the speaker! Do not let the speaker drop to avoid damage of its moving parts.
Please use the common sense when controlling volume!
5. Before the installation switch oļ¬€ the head unit and all other audio devices to avoid their damage.
8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or
other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and ļ¬re.
6. Make sure that the location of the speaker does not hinder the proper operation of mechanical and electrical devices of the
vehicle.
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
1. Fasten the speakers properly when installing it in the vehicle. If the component is disconnected during driving, it may cause
serious damage to the passengers of the vehicle or another vehicle.
CAUTION!!! High sound pressure can damage your health!
2. Before installing the components, if possible store the product in itā€™s original package to avoid accidental damage to the
product.
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are ļ¬rmly ļ¬xed and protected over the entire length.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 Ā°C (41F) to +40 Ā°C (104F). In case of moisture condensation, let the product to
dry.
2 . S A F E T Y I N S T R U C T I O N S
3 . W I R I N G D I A G R A M S
4 Ohm х 2 8 Ohm
S e ria l c on n ec t i o n o f th e s pe a ke r s
3
EN
Various examples of connection types are given at the pages below. Use these examples to determine the required load
impedance of your connection.
Do not expose your ampliļ¬er to loads below the value predetermined by the manufacturer.
Thank you for purchasing this Deaf Bonce product of Hannibal series! Our company is committed to the creation of extremely
loud sound systems with no loss of quality.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you
read and observe cautionā€™s in this manual. Please keep the manual in a safe and accessible place for future reference.


Product specificaties

Merk: Deaf Bonce
Categorie: Speaker
Model: Hannibal MH-81 v2

Heb je hulp nodig?

Als je hulp nodig hebt met Deaf Bonce Hannibal MH-81 v2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Deaf Bonce

Handleiding Speaker

Nieuwste handleidingen voor Speaker