Deaf Bonce Avatar MTU-60LE Handleiding

Deaf Bonce Speaker Avatar MTU-60LE

Lees hieronder de 📖 handleiding in het Nederlandse voor Deaf Bonce Avatar MTU-60LE (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
СЧ-ДИНАМИКИ
MID-RANGE SPEAKERS
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
MTU-60LE MTU-6 LE 1
https://alphard.audio
TSUNAMI SERIES
7. Box contents
9. Information on disposal of the electrical and electronic equipment
8. Warranty and maintenance info
1. Introduction
5. Specifications
6. Dimensions
2. Safety instructions
3. Wiring diagrams
(for the European countries with separate waste collection)
4. Filtering, recommended amplifier settings
2
C O N T E N T S EN
competi torsapproved by
1 . I N T R O D UC T I O N
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are firmly fixed and protected over the entire length.
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and fire.
CAUTION!!! High sound pressure can damage your health!
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 °C (41F) to +40 °C (104F). In case of moisture condensation, let the product to
dry.
2. Before installing the components, if possible store the product in it’s original package to avoid accidental damage to the
product.
3. Be careful when installing and dismantling the speaker! Do not let the speaker drop to avoid damage of its moving parts.
1. Fasten the speakers properly when installing it in the vehicle. If the component is disconnected during driving, it may cause
serious damage to the passengers of the vehicle or another vehicle.
4. When working with tools follow safety rules.
6. Make sure that the location of the speaker does not hinder the proper operation of mechanical and electrical devices of the
vehicle.
8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or
other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
Please use the common sense when controlling volume!
2 . S A F E T Y I NS T R U C T I O N S
3 . W I R I N G DI A G R A M S
4 Ohm х 2 MR 8 Ohm
Voice coil Total impedance
S e ria l c on n ec t i o n o f th e s pe a ke r s
3
EN
Various examples of connection types are given at the pages below. Use these examples to determine the required load
impedance of your connection.
Do not expose your amplifier to loads below the value predetermined by the manufacturer.
Thank you for purchasing this AVATAR product! Our company is committed to the creation of extremely loud sound systems
with no loss of quality.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.


Product specificaties

Merk: Deaf Bonce
Categorie: Speaker
Model: Avatar MTU-60LE

Heb je hulp nodig?

Als je hulp nodig hebt met Deaf Bonce Avatar MTU-60LE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Deaf Bonce

Handleiding Speaker

Nieuwste handleidingen voor Speaker