Deaf Bonce Avatar SST-315 D2 Handleiding

Deaf Bonce Subwoofer Avatar SST-315 D2

Lees hieronder de 📖 handleiding in het Nederlandse voor Deaf Bonce Avatar SST-315 D2 (20 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
SUBWOOFER
SST-312 D2/D4 STORM SERIES
SST-315 D2/D4
https://alphard.audio
2
EN
competi torsapproved by
C O N T E N T S
4. Recommended enclosure parameters.
7. Dimensions.
6. Specifications.
(for the European countries with separate waste collection).
1. Introduction.
2. Safety instructions.
3. Wiring diagrams.
5. How to use.
8. Box contents.
9. Warranty and maintenance info.
10. Information on disposal of the electrical and electronic equipment
1 . I N T R O D U C T I O N
2 . S A F E T Y I NS T R U C T I O N S
3 . W I R I N G D I A G R A M S
C o nne c ti o n of t e rm i na l s
To t a l i m p e d a n c e = S u b 1 + Su b 2 + S u b 3 . . . ΩΩΩ
EN
3
Attention! You need to connect both voice coils of the subwoofer.
Do not expose your amplifier to loads below the value predetermined by the manufacturer.
Various examples of connection types are given at the pages below. Use these examples to determine the required load
impedance of your connection.
Se r ia l c o n n ec t io n
Thank you for purchasing this AVATAR product! Our company is committed to the creation of extremely loud sound systems
with no loss of quality.
To ensure proper use, please carefully read through this manual before using this product. It is especially important that you
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.
1. Fasten the subwoofer properly when installing it in the vehicle. If the component is disconnected during driving, it may
cause serious damage to the passengers of the vehicle or another vehicle.
2. Before installing the components, if possible store the product in its original package to avoid accidental damage to the
product.
3. Be careful when installing and dismantling the subwoofer! Do not let the subwoofer drop to avoid damage of its moving
parts.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 °C (41F) to +40 °C (104F). In case of moisture condensation, let the product to
dry.
6. Make sure that the location of the subwoofer does not hinder the proper operation of mechanical and electrical devices of
the vehicle.
8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or
other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and fire.
Please use the common sense when controlling volume!
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
CAUTION!!! High sound pressure can damage your health!
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are firmly fixed and protected over the entire length.
4. When working with tools follow safety rules.
10 mm/0.4" 10 mm/0.4"


Product specificaties

Merk: Deaf Bonce
Categorie: Subwoofer
Model: Avatar SST-315 D2

Heb je hulp nodig?

Als je hulp nodig hebt met Deaf Bonce Avatar SST-315 D2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Deaf Bonce

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer