Danby Designer DAR1102BSL Handleiding

Danby Koelkast Designer DAR1102BSL

Lees hieronder de đź“– handleiding in het Nederlandse voor Danby Designer DAR1102BSL (11 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Danby Products Limited, Ontario, Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio, USA 45840
V3.12.09 JF
Owner’s Use and Care Guide
Guide d’utiliser et soin de Propriètaire
Manual de Instructions pare el Uso de su
Unidad
Model • Modèle • Modelo
DAR1102WE, DAR1102BSL
ALL REFRIGERATOR
Owner’s Use and Care Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4
• Safety Instructions
• Installation Instructions
• Features
• Operating Instructions
• Care and Maintenance
• Troubleshooting
• Warranty
TOUT RÉFRIGÉRATEUR
Guide d’utiliser et soin de Propriètaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 8
• Consignes de sécurité
• Consignes de Installation
• Caractéristiques
• Consignes de Fonctionnement
• Soins et entretien
• Dépannage
• Garantie
TODA REFRIGERADORA
GuĂ­a a utilizar y a cuidar del Proprietario . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 12
• Instrucciones de Seguridad
• Instrucciones d’instalación
• Caracteristicas
• Instrucciones Operadoras
• Cuidado y Mantenimiento
• Diagnostico de Problemas
• Garantia
CAUTION:
Read and follow all safety rules and
operating instructions before first use of
this product.
PRECAUTION:
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation
avant l’utilisation initiale de ce produit.
PRECAUCION:
Lea y observe todas las reglas de seguridad
y las instrucciones de operaciĂłn antes de
usar este producto por primera vez.
SAFETY INSTRUCTIONS
GROUNDING
INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical
current.
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must
be plugged into an outlet that is properly installed and
grounded.
WARNING - Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
DO NOT USE AN EXTENSION CORD
Use an exclusive wall outlet. Do not connect your
freezer to extension cords or together with any other
appliance in the same wall outlet. Do not splice the
cord.
IMPORTANT WARNING:An empty freezer is a
very dangerous attraction to children. Remove either
the gasket, latches, lids or doors from unused
appliances, or take some other action that will
guarantee it harmless.
DANGER: Risk of Child Entrapment! Before you
throw away your old refrigerator/freezer:
• Take off the doors.
• Leave the shelves in place so that children may not
easily climb inside.
DON’T WAIT! DO IT NOW!
INSTALLATION INSTRUCTIONS
Remove exterior and interior packings, wipe the
outside thoroughly with a soft dry cloth and the inside
with a wet, lukewarm cloth. Avoid placing the unit in
a narrow recess or near any heat source, direct
sunlight, or moisture. Let air circulate freely around
the unit. Keep the rear of the refrigerator 5 inches
away from the wall.
Location
1) Select a place with a strong, level floor.
2) Allow 5 inches of space between the back of the
refrigerator and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight
may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
4) Avoid very moist places. Too much moisture in
the air will cause frost to form very quickly on the
evaporator, and your refrigerator will have to be
defrosted more frequently.
1
FEATURES
5
3
4
2
1
1) THERMOSTAT DIAL
2) TEMPERED GLASS SHELVES
3) MAGNETIC GASKET: Tight fitting door seal keeps
all the cooling power locked inside. No hooks or
latches.
4) CRISPER WITH TEMPERED GLASS SHELF
5) CANSTORTM DOOR LINER: Holds 355mL (12 oz)
cans of pop, juice, or beer.
6) 2 LITRE AND GALLON BOTTLE STORAGE
6
OPERATING INSTRUCTIONS
DEFROSTING INSTRUCTIONS:
This refrigerator is inclusive of a cycle defrost system. The refrigerator has a cold plate located in behind the
back wall of the refrigerator cabinet. Ice build-up on the back wall during compressor operation is normal.
When the compressor has cycled off, accumulated ice will defrost automatically. Defrost water will collect
inside the drain trough, pass through the drain outlet located at the bottom of the cabinet, and funnel into a
drain pain situated above the compressor. The water will then evaporate from the heat of the compressor.
REMINDER: Keep the drain outlet opening clear of any food particles or other impediments. This will
ensure the water can funnel to the drain pain without obstruction. Failure to keep this drain clean may result in
water overflowing the trough, causing water to accumulate at the bottom of the refrigerator, eventually leaking
onto your floor. Please wipe this trough and drain outlet with a soft cloth as required.
DOOR REVERSAL INSTRUCTIONS:
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you
during the door reversal process.
2
To avoid vibration, the unit must be set level. This is accomplished by adjusting the (2) front leveling legs
located under the refrigerator. To start the refrigerator, turn the temperature control to the position
corresponding to the desired cooling. We recommend starting the temperature at 4 (middle setting) and
adjusting if necessary.
OFF = No Cooling 4 = Medium Cooling
1 = M inimum Cooling MAX = Maximum Cooling
The temperature will vary depending on the quantity of the food stored and on the frequency with which the
door is opened.
Fig. A
Fig. B
1) To access the lower hinge assembly, tilt back the refrigerator
or lay the unit on its back (Fig. A).
2) Remove both leveling legs located at the front of the unit.
3) Remove the screws holding the lower hinge assembly to the
unit.
4) Remove the main door assembly from the refrigerator (lift
open door slightly and pull downward).
5) Using a flat head screwdriver, remove the main door top hinge
pin (Fig. B).
6) Re-install the main door top hinge pin on the opposite side of
the unit.
7a) Remove the door plug and door bushing located on the top
of the main door.
7b) Interchange their positions (eg. door plug right side, door
bushing left side).
8) Re-install main door assembly on the refrigerator.
9) Remove door bushing and install on opposite(bottom door)
side.
10) Re-install the lower hinge assembly on the opposite side.
11) Make sure the door assembly is properly aligned on the unit
before tightening lower hinge screws.
12) Re-install both leveling legs.
The process is now complete.


Product specificaties

Merk: Danby
Categorie: Koelkast
Model: Designer DAR1102BSL

Heb je hulp nodig?

Als je hulp nodig hebt met Danby Designer DAR1102BSL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Danby

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast