Dali Evidence Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Dali Evidence (8 pagina's) in de categorie Speakers. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
OWNERS MANUAL
THANK YOU FOR
CHOOSING DALI
We know you cant wait to hear your new DALI loudspeakers, so well save the more
technical stuff until later. That way, youll have something to read once your system is up
and running.
But first, unless you are experienced and confident in hi-fi matters, please take the time to
read at least the sections on CONNECTIONS and PLACEMENT, before wiring your new
DALI loudspeakers to your system.
It is the goal of this manual to assist you in obtaining the finest possible performance from
your new DALI loudspeakers. If additional assistance is required, always feel free to contact
your authorised DALI dealer.
STEREO AND SURROUND
CONNECTION
The loudspeaker carton indicates whether the
speaker inside is Left or Right or Centre. Position
them correctly.
Always turn your amplifier off before connecting
or disconnecting any cables. Always use equal
lengths of cable for the left and right speakers.
Cable should be connected between loudspeaker
and amplifier, red plus (+) terminal to red plus (+)
terminal and black minus (-) terminal to black mi-
nus (-) terminal. It is important that the connections
are made correctly and in phase. Incorrect, out-
of-phase connection will result in a diffuse stereo
image and weak bass.
Your DALI Evidence loudspeakers have two pairs
of terminals. If you do not choose to use bi-wiring
or bi-amping, make sure that the enclosed metal
straps are in place and tightened by hand, one
connecting red terminal to red terminal, the other
connecting black terminal to black terminal. For
normal use, connect only one terminal pair to the
amp as shown in (Fig. 1).
In a surround system, connect centre, front and
rear surround loudspeakers to the surround amp
as shown in (Fig. 2).
Fig. 1. Normal Stereo Connection
Fig. 2. Surround Connection
2
BI-WIRING AND BI-AMPING
We recommend bi-wiring or bi-amping for
improved sound quality.
To bi-wire or bi-amp, remove the metal straps
before going on to the next steps. The top termi-
nal pair on each speaker connects to the high
frequency crossover section and the bottom ter-
minal pair connects directly to the low frequency
crossover section.
To bi-wire (fig. 3), connect cable from one pair of
terminals on each speaker to the amplifiers out-
put terminals. Then, connect another cable from
the second pair of speaker terminals to the SAME
terminals on the amplifier.
To bi-amp (fig. 4), two identical stereo amplifiers
should be used. Connect cable from the bass
terminals of the left speaker to the left channel of
one of the amplifiers. Connect cable from the
bass terminals of the right speaker to the right
channel of the same amplifier.
Connect cable from the high frequency terminals
of the left speaker to the left channel of the second
amplifier. Then, connect cable from the high
frequency terminals of the right speaker to the
right channel of the second amplifier.
Bi-wiring offers improvements in the areas of
openness and reduces intermodulation distort-
ion. Bi-amping offers further improvements in
these areas with the added benefit of increased
dynamics.
Tighten all connections securely so that the cable
cannot slip out. Make certain that no loose
strands of wire are sticking out. Wire connected
to a terminal must never touch wire connected
to any other terminal.
3
Cable quality and design do make a difference. Buy the best cable you can reasonably
afford. In this simple way, you can raise the performance of your system to a higher level.
Product specificaties
| Merk: | Dali |
| Categorie: | Speakers |
| Model: | Evidence |
Heb je hulp nodig?
Als je hulp nodig hebt met Dali Evidence stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speakers Dali
5 November 2022
6 November 2022
5 November 2022
5 November 2022
5 November 2022
6 November 2022
5 November 2022
5 November 2022
5 November 2022
6 November 2022
Handleiding Speakers
- Speakers Grundig
- Speakers JBL
- Speakers Onkyo
- Speakers Pioneer
- Speakers Xiron
- Speakers Yamaha
- Speakers Adler
- Speakers Advance Acoustic
- Speakers Albrecht
- Speakers Altec Lansing
- Speakers Amazon
- Speakers Arcam
- Speakers Arctic
- Speakers Auna
- Speakers Beats
- Speakers Beoplay
- Speakers BML
- Speakers Bose
- Speakers Deluxa
- Speakers Denver
- Speakers Dymond
- Speakers Ebode
- Speakers Gembird
- Speakers Hammond
- Speakers Harman Kardon
- Speakers I-onik
- Speakers Ideen Welt
- Speakers IHome
- Speakers Iluv
- Speakers Ion
- Speakers Konig Electronic
- Speakers Labtec
- Speakers Lenco
- Speakers Loewe
- Speakers Maginon
- Speakers Magnat
- Speakers Maxell
- Speakers Novero
- Speakers Noxon
- Speakers Numark
- Speakers Peaq
- Speakers Phonocar
- Speakers Power Dynamics
- Speakers Pure Acoustics
- Speakers Quadral
- Speakers Reflexion
- Speakers REL Acoustics
- Speakers Skytec
- Speakers Stereoboomm
- Speakers Tangent
- Speakers Technaxx
- Speakers Telestar
- Speakers Teufel
- Speakers Veho
- Speakers XtremeMac
- Speakers Jam
- Speakers Jamo
Nieuwste handleidingen voor Speakers
17 Oktober 2023
4 Oktober 2023
4 Oktober 2023
21 September 2023
21 September 2023
21 September 2023
21 September 2023
21 September 2023
21 September 2023
19 September 2023