Daewoo TC-656B Handleiding

Daewoo Ipod Audio TC-656B

Lees hieronder de 📖 handleiding in het Nederlandse voor Daewoo TC-656B (4 pagina's) in de categorie Ipod Audio. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
User's Manual
iPod Player not included
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these
instructions handy for future reference. Take special note of all warnings
listed in these instructions and on the unit.
1.Water and Moisture
The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a set basement.
2.Ventilation
The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed,
sofa, rug or similar surface that may block the ventilation openings. Also,
it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3.Heat
The unit should be situated away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers) that produce heat.
4.Power Source
The unit should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
5.Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. It is always best to
have a clear area from where the cord exits the unit to where it is plugged
into an AC outlet.
6.Cleaning
The unit should be cleaned only as recommended. See the section "Care
and Maintenance" of this manual for cleaning instructions.
7.Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
8.Attachments
Do not use attachments not recommended by the product manufacturer.
9.Lightning and Power Surge Protection
Unplug the unit from the wall outlet ouring lightning storms.
This will prevent damage to the product due to power-line surges.
2
Thank you for purchasing the Universal MP3 player docking Music Cube.
This system incorporates the following features :
® ® ®
iPod , iPod mini and iPod nano Player / Re-charger
®
Interchangeable iPod Adaptors
USB docking for playback of MP3 player
Audio line-in for connecting CD player or other digital audio player
AM(MW)/FM Stereo receiver with 10AM + 10FM presets, Digital Tuning
and auto-search function
Electronic Volume Control
Built-in 2 High Fidelity Speakers
Multi-function Back-lit LCD Display
Clock and Year/Month/date function
®
Wake up to Alarm (Buzzer), Radio or iPod with Snooze function
Sleep to Music Timer
External FM Antenna connector for better reception
Stereo Headphone jack connection for private listening
® ® ®
iPod , iPod mini and iPod nano are trademarks of Apple Computer Inc.,
registered in the U.S. and other countries.
Important Safety Instructions 10.Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire of electric shock.
11.Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate
normally.
12.Antenna
Do not connect an external antenna to the unit (other than that provided).
13.Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a m onth
or longer, the power cord should be unplugged from the unit to prevent
damage or corrosion.
14.Servicing
The user should not attempt to service the unit beyond those methods
described in the user's operating instructions. Service methods not covered
in the operating instructions should be referred to qualified service personnel.
Features
3
folded: 105 x 148.5mm
use 4 pcs 210 x 148.5mm / 80gms paper
bk+bk ( black on white)
04/03/2008 VER3.0-UK
iPod Speaker Clock
Radio with USB
TC-656W
HELPLING NUMBER 0870 100 2525
TC-656B
®
12. button : Selects AM/FM radio, iPod mode, AUX FUNCTION
(auxiliary input) mode and USB mode.
13. : Connection for MP3 playerUSB connector
14. button : To advance 10 Songs (files)+10
15. button : Advance to next directoryDIR+
16. button : Skip BackwardFR
®
1. iPod docking station
®
iPod docking connector2.
POWER ON/OFF3. button: To turn the unit on and off.
4. buttons : Adjusts volume level up or down.VOLUME +/-
5. button: Activates the snooze function; Turn LCD SNOOZE / LIGHT
backlight ON/OFF.
6. buttons : Tunes the radio channel frequency up or down.TUN +/-
7. buttons : Selects the preset radio stations.CH +/-
8. button : Switches the alarm on or off.ALARM ON/OFF
9. button : Selects the time duration of the sleep timer.SLEEP
10. button : Enters the setting mode.MODE
11. MEM button : Save the radio preset stations; saves settings.
Clock and presets battery back-up
A backup battery compartment located at rear of the unit.
(1) Open the battery compartment door.
(2) For clock and settings backup, follow the polarity diagram shown inside
the compartment and install 2 x AAA batteries (purchase separately).
(3) Close the battery compartment door.
FM Antenna Installation
Connect the FM antenna wire to the FM Antenna terminal and extend it for
the best reception (see figure below).
Connect FM antenna wire to the antenna terminal at rear of the main unit
AC-DC Adaptor Connection
The unit can be powered by an external AC-DC Adaptor, with a required
output DC 10V 1400mA (included).
(1) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(2) Connect the adaptor's DC output plug to the DC-in jack of the unit.
OP EN
RESET
AUX
Installation
4
Description of Parts Main Unit
Main Unit
Top view
DI R+
+ 10
FF
FR
FUNCT ION MEM MODE SLEEP
+
-
SNOO Z E/L IG HT
USB
15
14
16 1719 18
13 1 2 12 11 10 9
5 6 8 4 3 7
MONT H DAT E
DU AL T IME
212021
Front view
Rear view
OP EN
RESET
AUX
DC 10V
EXTERNAL FMANT
26
27 22 24 23
25
5
17. FF button : Skip Forward
18. PLAY/PAUSE button
19. STOP button
20. LCD display
21. Pair of Speakers
22. : Auxiliary audio signal input.AUX IN jack
23. jack : For the connection of external DC power supplyDC-in
24. Phones Jack
25. FM Antenna terminal
26. Battery Compartment
27. button: Resets the unit.RESET
6 7
Description of Parts Remote Control
Remote Control
1. Infrared Transmitter
2. buttonPOWER ON/OFF
3. buttonsVOL +/-
4. buttonFUNCTION
5. buttonALARM ON/OFF
6. buttonSNOOZE / LIGHT
7. buttons: for Up, TUN Up/Down
for Down
8. buttonsCH + / -
9. buttonMEM
10. buttonMODE
11. SLEEP button
12. buttons:iPod Skip/Search Forward/Backward
for Forward, for Backward.
13. iPod PLAY/PAUSE button
14. Battery Compartment
®
Five different adaptors are designed to suit anydockable iPod model
®
to the docking station. Before connecting your iPod to the system,
®
select and insert the proper adaptor for your iPod model into the
®
docking station first (refer to following iPod adaptor table) .
®
Description of Parts iPod adaptors
®
iPod adaptor Table :
* For the 5G (fifth generation) 30GB and 60GB iPods with video capability.
®
Please use the original adaptor from your 5G iPod model at the time of
purchase. No 5G adaptor is provided from this system.
®
Install this “Docking Station Dust Cover” in the docking station if no iPodw ill
be docked for an extended period of time.
Clock and Calendar Settings
When the unit is at the power off mode.
Set Clock
1. Press the button 3 times, the clock display flashes. MODE
2. To set the hour, press the button to set advance or reverse hour TUN +/-
setting. Press and hold the button for fast advance / reverse value.
3. To set the minute, press the VOLUME +/- button to set advance or reverse
minute setting. Press and hold the button for fast advance / reverse value.
Set 12/24 Hour format
4. Press the MODE button again to enter 12/24 hour format setting mode.
5. To select 12/24 hour format, press either the TUN +/- button.
Alarm Operations
Setting the Alarm time
When the unit is at the power off mode.
1. Press the MODE button once. The alarm clock display flashes.
2. To set the hour, press TUN + / - button to set advance or reverse hour setting.
Press and hold the button for fast advance / reverse value.
3. To set the minute, press the VOLUME +/- button to set advance or reverse
minute setting.
Press and hold the button for fast advance / reverse value.
4. Press the MODE button again. The alarm source icon flashes.
5. Select “Wake to Buzzer” “Wake to Radio” or “Wake to
” & by pressing the button.iPod iPod VOLUME +/-
Note : - When “Wake to Radio” is selected, ensuring that your desired
radio station is tuned and the proper volume level is set.
® ®
- When “Wake to iPod iPod” is selected but your has not been
docked, the alarm source will be redirected to the Buzzer
automatically when the alarm time is reached.
6. To save all settings and exit the setting mode, press the button MEM
or wait for around 10 seconds.
7. To activate the daily alarm, press the button. A " " ALARM ON/OFF
indicator appears on LCD display.
8. When the current time matches the alarm setting, the alarm sounds from
the selected source.
Wake to Buzzer
When the alarm time is reached, the buzzer alarm will sound for one minute.
st
After the 1 alarm minute, it goes into Auto Snooze mode. The display shows
the "SNOOZE" indicator. The buzzer turns off for the snooze time (around 10
minutes) then comes on again. This operation will be repeated 3 times. After
the fourth alarm is finished, the alarm will shut off until the same alarm time
on the next day.
You may also activate the snooze function manually after the alarm sounds
by pressing the button. The buzzer stops for the snooze time then SNOOZE
comes again.
The snooze operation (including auto snooze and manual snooze) can be
repeated by three times.
To stop the alarm immediately after the buzzer sounds, you can also press
the ALARM ON/OFF button. It resets itself for the following day.
8
Sleep Timer Function
Sleep to Timer
This feature allows you to fall asleep to the radio or an USB dockable MP3
player for up to 60 minutes, and then the system shuts off automatically.
(1) Press the POWER button to turn the unit on.
(2) Either in radio mode, tune to the desired radio station (see “Listening To
The Radio” section in this manual) or in USB mode, playback music from
the MP3 player (see “Listening To The MP3 Player” section in this manual).
(3) To select the sleep timer to turn the unit off after 15, 30, 45 or 60 minutes,
press the SLEEP button 1, 2, 3 or 4 times, respectively. The unit plays for
the selected length of time then automatically turns off.
(4) To turn the unit off before the sleep timer counts down to zero, press the
POWER button at any time.
Note :If you are falling asleep to music from an iPod or an external device
connected to the Aux Input, the sleep timer will shut off the power to this
system but it will not turn off those devices.
9
10
Listening To The Radio
FM Antenna
Connect the FM antenna wire to the FM Antenna terminal.
Fully extend the FM antenna wire for maximum reception.
Radio Tuning
1. Press the POWER button to turn on the unit.
2. To activate the radio, press the FUNCTION button to select AM(MW)
or FM radio mode.
3. In FM radio mode, if necessary, press the MODE button to select STEREO
(ST) or MONO FM reception.
4. To manually tune to a desired station, repeatedly press the TUN +/- button.
5. To automatically search for stations with strong signals, press and hold the
TUN +/- button until the frequency reading on the display begins to scan
then release the button. The tuner will stop on the first strong station signal
it finds.
Notes:
Use manual tuning to select weaker stations that might be bypassed during
automatic tuning.
If the automatic tuning does not stop on the exact frequency of the station,
for example, it stops on 100.9 MHz instead of 100.8 MHz, use the manual
tuning method to “fine tune” to the exact frequency of the desired station.
Radio Broadcast System Selection
In case the unit is moved to different country with slightly different radio
broadcast system, the unit allows you to select USA, EU and Japan systems.
For the use in Australia, please use EU's radio broadcast system.
1. When the unit is in power off mode.
2. Press the button repeatedly until the display shows the flashing MODE
“USA”, “EU” or “JP” indicator.
3. Press the buttonTUN +/ - to select one of the broadcasting systems.
USA's Radio Broadcast System AM 520 – 1710 kHz, 10kHz tuning step
FM 87.5 – 108 MHz, 0.1MHz tuning step
EU's Radio Broadcast System AM 522 1620 kHz, 9kHz tuning step
FM 87.5 – 108 MHz, 0.05MHz tuning step
Japan's Radio Broadcast System AM 522 – 1629 kHz, 9kHz tuning step
FM 76.0 – 108 MHz, 0.1MHz tuning step
4.To save the setting and exit the setting mode, press the MEM button.
11
Wake to Radio
When the alarm time is reached, the radio will automatically turn “ON”.
It starts softly and gradually becomes louder.
It plays for 60 minutes then shuts off and resets itself for the following day.
SNOOZEDuring the activation of the radio, you may press the button to
activate the snooze function. The radio stops for the snooze time (around
10 minutes) then turns “ON” again. This manual snooze operation can be
repeated three times. Each time the radio turns “ON”, it plays for 60
minutes (without pressing the snooze button).
To stop the alarm immediately after the radio sounds, you may also press
the button. It resets itself for the following day.ALARM ON/OFF
®
Wake to iPod
®
Your docked iPod will automatically switch on when the alarm time is
reached. It starts softly and becomes gradually louder.
®
The playback will keep for 60 minutes and then automatically iPod
shut off.
®
To stop the playback immediately, press the ALARM On/Off button iPod
once.
When the alarm sounds, it can be temporarily stopped by pressing the
SNOOZE button. The display will show the indicator “SNOOZE” .
The alarm will be delayed for 10 minutes and then come again.
This manual snooze operation can be repeated only three times.
Set Year
6. Press the button again to enter the year setting mode, the year MODE
reading flashes.
7. To set year, press the button to set advance or reverse the year.TUN +/ -
Press and hold the button for fast advance / reverse value.
Set Month/Date
8. Press the button again to enter the month/date setting mode, MODE
the month/date reading flashes.
9. To set Month, press the TUN + /- b utton to s et a dvance o r re verse th em onth.
Press and hold the button for fast advance / reverse value.
10. To set Date, press the VOLUME +/- button to set advance or reverse date.
Press and hold the button for fast advance / reverse value.
Exit setting mode
11. To save all settings and exit the setting mode, press the button. MEM
Radio Preset Stations
The unit allows you to store up to 10 AM(MW) and 10 FM stations in the tuner
preset memories for easy recall at any time.
1. Press the POWER button to turn on the unit.
2. To activate the radio, press the FUNCTION button to select AM(MW) or
FM band.
3. Tune to a radio station you want to store in memory using the TUN +/-
button.
4. Press the button. The preset channel number “ 01” AND MEM icon MEM
flash on display.
5. To select desired preset station number, press the CH +/- button.
6. To confirm preset location, press the MEM button.
7. To store up to 10 AM and 10 FM station presets, repeat steps 3 to 6 above.


Product specificaties

Merk: Daewoo
Categorie: Ipod Audio
Model: TC-656B

Heb je hulp nodig?

Als je hulp nodig hebt met Daewoo TC-656B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden