Daewoo dsb 182 lh Handleiding

Daewoo Airconditioner dsb 182 lh

Lees hieronder de 📖 handleiding in het Nederlandse voor Daewoo dsb 182 lh (19 pagina's) in de categorie Airconditioner. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/19

This air conditioner meets strict safety and operating

standards. The installer of this unit must install or service

this unit so it operates safely and efficiently.

The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to

alert the user to the presence of uninsulat-

ed dangerous voltage within the product’s

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and main-

tenance (servicing) instructions in the liter-

ature accompanying the appliance.

Contact Installer if Necessary:

The installation instructions are for a experienced

installer. If you are not an experienced installer, contact a

local installer for help. If you require help with service,

contact your certified dealer or Daewoo Electronics for

additional instructions.

If Unit is Installed Improperly:

The manufacturer shall in no way be responsible for

improper installation or maintenance service, including

failure to follow the instructions in this manual.

Precautions When Wiring:

• Do not plug in the unit until all connections (tubing,

drain hose, mounting, etc.) have been made and dou-

ble-checked.

• High voltages are present in this unit and are very dan-

gerous. Please refer to these instructions and diagrams

when wiring. Improper connections or inadequate

grounding can cause accidental injury.

• This unit must be grounded in accordance with local

electrical codes.

• Connect wires and pipes securely and tightly as loose

connections/wiring may cause overheating at connec-

tions and a possible fire hazard.

Precautions When Transporting:

• When transporting the unit, be very careful and get help

as the units are very heavy. Be careful of sharp edges

on the units also.

Precautions When Installing:

• When installing in a ceiling or wall, make sure the

ceiling/wall is strong enough to hold the unit’s weight. A

frame may be necessary for added support.

• When installing in a room, make sure the tubes are

well insulated to protect the walls and furniture from

sweating of the tubes.

• When installing in moist or uneven locations, make

sure to use a raised level concrete pad or concrete

blocks to provide a level, solid foundation for the out-

door unit; this prevents water damage and vibration.

• When installing in an area of high winds, make sure

to securely anchor the outdoor unit down with bolts and

a metal frame.

When Connecting Refrigerant Tubing:

• Keep all tubing as short as possible.

• Use the flare method for connecting tubing.

• Apply refrigerant lubricant to the matching surfaces of

the flare and union tubes before connecting them, then

tighten , making sure not to overtighten.

• Check the tubes carefully for leaks before starting the

test run.

When Servicing:

• Make sure the power is off and the unit is unplugged

before opening the unit to troubleshoot or repair electri-

cal parts and wiring.

• Keep your fingers and clothing away from any moving

parts.

• Clean up the sight after you finish, making sure no

metal scraps and wiring are left in the unit.

• The Air conditioner shall be installed in accordance with

the nationed wiring regulation.

SAFETY INSTRUCTIONS

PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE

INSTALLING AND OPERATING THE UNIT:

IMPORTANT NOTES

• Adhere to all safety instructions and warnings

throughout this manual.

• Read this manual carefully before installing or operat-

ing this unit to become familiar with its features and

obtain the performance that will bring you continued

enjoyment for many years.

• Follow each installation or repair step exactly as

shown in the manual.

• Observe all local, state and national electric codes.

Contact your local government for more information

on electrical codes.

WARNING:

• ELECTRICAL SHOCK CAN CAUSE SEVERE PERSON-

AL INJURY OR DEATH. ONLY A QUALIFIED, EXPERI-

ENCED ELECTRICIAN/INSTALLER SHOULD ATTEMPT

TO WIRE THIS SYSTEM.

• THE APPLIANCE IS NOT INTENDED FOR USE BY CHIL-

DRENOR INFIRM PERSONS WITHOUT SUPERVISION.

• YOUNG CHILDREN SHOULD BE SUPERVISED TO

ENSURE THAT DO NOT PLAY WITH THE APPLIANCE

Remark per EMC Directive 89/336/EEC

To prevent flicker impressions during the start of the compressor (technical process) following installation conditions do apply.

1. The power connection for the air conditioner has to be done at the main power distribution. This distribution has to be of an low

impedance. Normally the required impedance is reached at a 32A fusing point. Air conditioner fuse has to be 16A max!

2. No other equipment has to be connected to this power line.

3. For detailed installation acceptance please refer to your contract with the power supplier.

If restrictions do apply for products like washing machines, air conditioners or electrical ovens.

4. For power details of the air conditioner refer to the rating plate of the product.

ROOM AIR CONDITIONER INSTRUCTION

Remarques relatives à la Directive EMC 89/336/CEE

Pour eviter les phénormènes de scintillements(variation de lumière) et les parasites lors du démmarrage du compresseur, respecter

les consignes d’installation décrites dans le mode d’emploi.

1. Le raccordement au secteur doit être-fait à l’aide d’un cable de section suffisante pour eviter tout échauffement de celui-ci et les

chutes de tension (section recommandée 3x4mm

)

Cette ligne doit être protégée par un fusible ou disjoncteur de 16A

2. Aucun autre appareil ne doit être connecté sur cette ligne.

3. En cas de doute ou de difficulté contactez votre agence EDF. Vériflez qu’il nexiste pas de contraintes particulères pour l’instala-

tion et l’utilisation de ce climatiseur.

4. Pour les caractéristiques de l’appareil référez vous à sa plaque signalétique.

CONSIGINES D’INSTALLATION RACCORDEMENT ELECTRIQUE

Comentario de la Directiva 89/336 EEC de la EMC.

ára prevenir la sensación de golpeteo al arrancar el compresor(procesotécnico) debe aplicar las siguientes instrucciones de instalación

1. La conexión del aire acondicionado a la corriente eléctrica tiene que ser hecha a la distribución principal de energía. Esta distribución

tiene que ser de baja impedancia. Normalmente, la impedancia requerida se alcanza en el punto de fusión de 32A. El fusible del aire

acondicionado tiene que ser de 16A máximol.

2. Ningún otro equipo debe ser conectado a esta línea eléctrica.

3. Para normas detalladas de instalación por favor consulte el contrato con su suministador eléctrico, si tiene que aplicar restricciones

para productos como lavadoras, aire acondicionado u homos eléctricos.

4. Para detalles sobre las alimentación eléctrica del aire acondicionado consulte la placa de datos del aparato.

INSTRUCCIONES DE INSTALACION DEL AIRE ACONDICIONADO

Hinweis entsprechend EMV-Direktive 89/336/EEC

Um einen “Flicker-Effekt” beim Anlauf des Kompressors (kurzzeitiger Spannungseinbruch, technischer Vorgang) zu vermeiden, muß für fol-

gende installationsbedingungen gesorgt sein. (siche auch “Anweistingen zur installation.”)

1. Der Stromanschluß für die Klimpaanlage muß am Hauptverteller vorgenommen werden. Die Abzweigung muß mit niedriger Impedanz aus-

geführt werden. Normalerweise ist die erforderliche niedrlge impedanz bei einem Sicherungsanschlußpunkt von 32A erreicht.

2. An die gleíche Netzleitung dürfen keine anderen Geráte angeschlossen sein.

3. Seitens der lokaten Energieversorgungsuntemehmen bestehen möglicherweise Einschránkungen für Produkte wie Waschmaschinen,

Klimaanlagen, elektrische Öfen, etc. Für Einzelheiten zur Installation sehen Sie in Ihren Vertrag mit dem Energieversorgungsunternehmen.

4. Einzelheiten über die elektrischen Daten der Kimaanlage ersehen Sie auf dem Typenschild des Gerates.

ANWEISUNGEN ZUR INSTALLATION DER RAUM-KLIMAANLAGE

NOTA DELLA DIRETTIVA EMC 89/336 EEC

Allo scopo di prevenire l’ effetto di FLICKER (variazione della luce) alla partenza del compressore, durante l’installazione seguire l punti sot-

toelencatl.

1. Il collegamento dell’ alimentazione, del condizionatore, deve essere fatto con una linea preferenziale dlrettamente al quadro principale o

contatore, e deve essere a bassa impedenza.

Normalmente questa lmpedenza la si ottiene al punto di fusione di 32 A ; perll condizionatore usare un fusibile da 16 A max.

2. Nessun altro apparecchio elettrico dovra essere collegato alla stessa linea di alimentazione.

3. Per maggiori dettagll circa l’ accettazione dell’ installazione del condizionatore, fare riferimento al contratto con l’ Ente erogatore dell’

Energla Elettrica e verificare che non ci siano restrizioni in atto all’ Installazione di prodottl elettrici ad alto consumo.

4. Per le informazioni relative ai dati di allmentazlone del condizionatore, fare riferimento all’ etichetta posta sul prodotto.

INSTRUZIONI PER L’INSTALLAZIONE DEL CONDIZIONATORE

D’ARIA PER STANZE

CONTENTS

It is recommended that you read Operating instructions fully before operating this unit.

Safety Instructions...............................................................................................................................................................1

Contents ..............................................................................................................................................................................3

OPERATING SECTION

Location of Controls.............................................................................................................................................................4

Indoor Unit....................................................................................................................................................................4

Outdoor Unit.................................................................................................................................................................4

Indoor unit Display........................................................................................................................................................5

Remote Controller........................................................................................................................................................6

Remote Display............................................................................................................................................................6

Operation.............................................................................................................................................................................8

Connecting the AC Cord ..............................................................................................................................................8

How to Install Batteries ................................................................................................................................................8

Setting the Unit for Remote Operation.........................................................................................................................8

Celsius to Fahrenheit Conversion Chart......................................................................................................................9

To Set the Unit to Auto Mode.......................................................................................................................................9

To Operate Only Fan .................................................................................................................................................10

To Set Unit to Cool Mode...........................................................................................................................................10

To Set Unit to Dehumidifier Mode..............................................................................................................................11

To Select Fan Direction..............................................................................................................................................11

To Set Unit to Quick Mode.........................................................................................................................................12

To Set the On Timer Mode ........................................................................................................................................12

To Set the Off Timer Mode ........................................................................................................................................13

To Set Unit to Sleep Mode.........................................................................................................................................13

To Set Unit to Heat mode (Only LH/LH-R) ................................................................................................................14

Emergency Operation ................................................................................................................................................14

Changing/Cleaning the Air Filters .....................................................................................................................................15

Care and Maintenance......................................................................................................................................................16

Troubleshooting Guide......................................................................................................................................................17

Specifications ....................................................................................................................................................................18