Da-Lite UTB Contour Handleiding

Da-Lite Monitor UTB Contour

Lees hieronder de 📖 handleiding in het Nederlandse voor Da-Lite UTB Contour (8 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

INSTRUCTION BOOK FOR

UTB Contour

Tools Required for InstallationIncluded Hardware

Large Wall Bracket (47”)

(1) Screens under 104" in viewing width

(2) Screens 104" and over in viewing width

Phillips Screwdriver

Tape Measure

Pencil

Small Bottom Wall bracket (8”)

(1) Screens under 104" in viewing width

Large Bottom Wall bracket (44”)

(1) Screens 104" and over in viewing width

Frame Brackets

(1) Screens under 104" in viewing width

(2) Screens 104" and over in viewing width

#10

X ⅜"

Silver Screws (12) 8-32

X ⅜"

Machine Screws (4)

#10

X ⅜"

Pointed

Black Screws (Varies)

8–32 X " Fillister Screw½

(1) Screens under 104" in viewing width

(2) Screens 104" and over in viewing width

1. Create a clean work area for assembly using a soft clean material.

This will protect the inner frame and ensure a clean projection

surface.

2. Unwrap frame pieces. Assemble inner frame pieces on the work

area.

3. Slide inner frame pieces together at corners. Secure inner frame

pieces with (12) #10 x

⅜

" silver screws (Figure 1).

4. Set the assembled inner frame aside. Unroll screen surface and

place it viewing side down on the clean work area.

5. Place inner frame on screen surface, screw side up.

Inner Frame & Viewing Surface Assembly

Figure 1

(12) #10 x ⅜" Screws.

Silver, Flat Tip

6. Wrap fabric around inner frame and hook grommets over the

corner pins (Figure 2).

7. Hook the rest of the grommets over the lat head screws on all

sides (Figure 2). Please be sure the grommets clear the head of

each screw.

Note: Your screen was assembled and aligned prior to shipment.

If any realignment is necessary, the positioning of the lat head

screws can be adjusted. Using a Phillips screwdriver, rotate the

lat head screw one turn counterclockwise. Reposition screw as

needed. Secure the screw in place by slowly rotating it clockwise.

Grommets

Corner

Flat Head

Screw

Figure 2

Grommet is under

the Flat Head Screw

Product specificaties

Merk:	Da-Lite
Categorie:	Monitor
Model:	UTB Contour
Kleur van het product:	Grijs
Oorspronkelijke beeldverhouding:	16:9
Kleur behuizing:	Zwart
Kijkhoek:	85 °
Zichtbare schermhoogte (h):	58 mm
Zichtbare schermbreedte (b):	104 mm
Diagonaal:	- "
Formaat:	HDTV
Grenzen:	34.95 mm