D-Link DGS-6600-8XG Handleiding

D-Link Niet gecategoriseerd DGS-6600-8XG

Lees hieronder de 📖 handleiding in het Nederlandse voor D-Link DGS-6600-8XG (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

Documentation also available on CD

and from the D-Link Website

Quick Installation Guide

4 Slot Chassis-Based Switch

This document will guide you through the basic

installation process for your new D-Link chassis-

based Switch

DGS-6604

2 D-Link DGS-6604 Modular Switchu

About This Guide

This guide contains step by step instructions

for setting up the D-Link DGS-6604 chassis-

based switch. Please note that the model you

have purchased may appear slightly different

from those shown in the illustrations.

Please read this manual carefully before using

the product, paying special attention to safety

warnings so as to avoid injury or damage to

equipment.

This manual is intended for users who have

experience in installing and maintaining net-

work hardware, and assumes that users are

familiar with standard networking terms and

concepts.

Product Overview

D-Link’s DGS-6604 chassis-based switch is

an intelligent and high-performance multi-layer

LAN device designed for enterprise campus

and metropolitan area networks (MAN). It is

ideal for deployment in environments where

uninterrupted network applications and a high

level of performance, security and control are

required.

Featuring exible modular architecture and

industry standard compliance, the switch pro-

vides scalable expansion and a high level of

investment protection for businesses and tel-

ecom carriers to deploy Gigabit and 10-Gigabit

packet switching and routing for ofce network-

ing and Ethernet-based Internet services to

homes.

Warning s

Power Supply Safety Warning

Ground the device before power-

ing on to guard against power

surges.

Be sure that all cables are ground-

ed correctly.

Static Electricity Protection

Warning

Always wear an anti-static wrist

strap when contacting the chassis

to prevent static damage.

Laser Safety Warning

CLASS 1 LASER PRODUCT

Directly looking at the optical in-

terface or optical bers may cause

eye damage.

Fan Safety Warning

The fan mechanism is dangerous.

Avoid touching the area near the

fan.

Transportation Safety Warming

The device and components may

comprise more than 27 kg in total.

Use care when inserting or remov-

ing heaving components.

Maintenance Warning

Maintenance should only be car-

ried out by qualied service techni-

cians

D-Link DGS-6604 Modular Switch 3u

Preparation for Installation

To ensure normal operation and prolonged life

of the DGS-6604, the appropriate temperature

and humidity must be maintained in the equip-

ment room.

If the equipment room’s temperature and

humidity do not meet the requirements. the

equipment may sustain damage.

Operating Temperature Operating Humidity

0ºC-50ºC 10%-90% RH non-

condensed

Table 1. Temperature and Humidity Require-

ments

Notes:

1. The ambient temperature and

humidity should be measured

at the point that is 1.5m above

the oor and 0.4m in front of the

equipment when there is no pro-

tective plate in front or back of the

equipment rack

2. The short-term working condi-

tions apply where the continuous

working period does not exceed 48

hours and the cumulative total pe-

riod within a year does not exceed

15 days

Static Discharge Damage Prevention

To prevent damage from static electricity,

please conform to the following guidelines:

1. Be sure to install an adequate ground for all

electronic equipment.

2. Use appropriate dust prevention measures.

3. Maintain the required humidity in the oper-

ating environment

4. Always wear an anti-static wrist strap when

working around any electronic circuitry.

5. Hold a circuit board by its edges. Do not

touch any components on the PCB.

6. Do not allow clothing to touch a circuit

board. An antistatic wrist strap can only

prevent static electricity from the human

body, but cannot mitigate static electricity

from clothing.

Moving the Device

The DGS-6604 is quite heavy. When handling,

please pay close attention to the following

guidelines:

• Avoid moving the equipment frequently.

• If you nd the chassis weight unbearable,

do not attempt to lift the equipment alone.

• Lift and move the chassis using the han-

dles on the top panel .

• Turn off all power supplies and unplug all

power cables before moving the equip ment.

• Completely loosen the thumb/Phillips

screws and pull the card levers to remove

each and all line cards, fan tray, and power

mod ules from the chassis before moving it.

Figure 1. Correctly Moving the DGS-6604

Do not move the equipment by

grasping the panels, power sup-

ply handles, or ventilation holes,

as they are not designed to bear

weight.

Product specificaties

Merk:	D-Link
Categorie:	Niet gecategoriseerd
Model:	DGS-6600-8XG
Netwerkstandaard:	IEEE 802.3ae
Temperatuur bij opslag:	-40 - 70 °C
Luchtvochtigheid bij opslag:	5 - 90 procent
Mean time between failures (MTBF):	265455 uur
Full duplex:	Ja
Stroomverbruik (typisch):	200.26 W
Bedrijfstemperatuur (T-T):	0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent