CyberPower SB0602BA-DE-W50 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower SB0602BA-DE-W50 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Cord Management Installation:
Installation:
A. Power Connections
1. The surge protector must be plugged into a properly
grounded outlet.
2. Plug all connected equipment directly into the surge
protector.
Note:
DO NOT connect to an ungrounded outlet. DO NOT use
with 2-wire extension cords or adapters. This surge protector
is designed for indoor use only. Install the surge protector
away from heat emitting appliances such as radiators or
heat generators. Do not install where excessive moisture is
present.
Never install electrical or telephone wiring during a lightning
storm.
DO NOT USE FOR MEDICAL, LIFE SUPPORT
EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.
B. Phone/Fax/Modem Connections (Select Models)
To prevent surge damage to telephone equipment, connect
the Phone/Fax/Modem through the surge protector.
If your surge protector has phone jacks:
1. Connect the Phone/Fax/Modem line from your wall
outlet to the IN jack of the surge protector.
2. Connect the phone cord, (not included in this
product), into the OUT jack on the surge protector.
3. Connect the other end of the phone cord to the
Phone/Fax/Modem jack of the device you want to
protect.
C. Coax Cable Connections (Select Models)
To protect a TV or DVR from surge damage, connect the
coax cable through the surge protector.
If you are using a coax cable and your surge protector is
equipped with coax jacks:
1. Connect the Cable/Antenna line from your source to
the IN jack on the surge protector.
2. Connect a coax cable from the OUT jack of the surge
protector to the device you want to protect.
D. Mounting the Surge Protector
You can mount the surge protector to a vertical surface with
just two screws, (not included), using the eye loops provided
at the backside of the Protector.
Power Switch/Indicator
Used as the master on/off switch for outlets. The indicator
light is on when power on. When power off, the indicator
light is off as well.
Warranty
CyberPower warrants this product to be free from defect in
electrical parts or manufacture for two (2) years. If a defect
results in product failure during its normal use within the
warranty period, please contact your local dealers and/or
distributors for warranty services.
A
B
C
EN
Caution:
RISK OF ELECTRIC SHOCK – USE ONLY IN DRY
LOCATIONS AND ONLY INDOORS.
" DO NOT PLUG INTO ANOTHER SURGE
PROTECTOR, POWER STRIP, EXTENSION CORD
OR OTHER RELOCATABLE POWER TAP."
This device features an internal protection that will
disconnect the surge protective component at the end of
its useful life but will maintain power to the load now
unprotected.
CyberPower Systems
www.cyberpower.ru
© 2013 CyberPower Systems, Inc.
All rights reserved. All other
trademarks are the property of their respective owners
K09-0000142-01
Руководство Пользователя l
Шнур управления установки:
Установка:
A. Соединения
1. Сетевой фильтр должен быть подключен к
тщательно заземленной розетке.
2. Подключите оборудование в розетки сетевого
фильтра.
Предупреждение:
НЕ ПОДКЛЮЧАЙТЕ сетевой фильтр в розетку без
заземления. НЕ ИСПОЛЬЗУЙТЕ сетевые удлинителя или
адаптеры. Это сетевой фильтр разработан для
использования в помещении только. Располагайте сетевой
фильтр на расстоянии от нагревательных приборов как
радиаторы отопления или генераторы тепла. Никогда не
подключайте оборудование во время грозы.
НЕ ИСПОЛЬЗУЙТЕ СЕТЕВОЙ ФИЛЬТР С
МЕДИЦИНСКИМ ОБОРУДОВАНИЕМ,
ОБОРУДОВАНИЕМ ЖИЗНЕОБЕСПЕЧЕНИЯ ИЛИ
ДРУГИМ ВЫСОКОКРИТИЧНЫМ ОБОРУДОВАНИЕМ.
B. Подключение коммуникационных линий
Телефон/Факс/Модем (Некоторые модели)
Для защиты коммуникационного оборудования,
подключите Телефон/Факс/Модем через сетевой фильтр.
Если ваш сетевой фильтр имеет коммуникационные
розетки:
1. Подсоедините ваши коммуникационные линии к
разъему “IN” сетевого фильтра.
2. Подсоедините телефонный кабель (не входит в
комплект поставки) в разъем “OUT” сетевого
фильтра.
3. Подсоедините другой конец телефонного кабеля к
оборудованию, которое вы хотите защитить.
C. Подключение коаксиального кабеля
(Некоторые модели)
Для защиты телевизионного оборудования подключите
коаксиальный кабель через сетевой фильтр. Если вы
используете коаксиальный кабель, и ваш сетевой
фильтр имеет коаксиальный разъем:
1. Подсоедините Кабель/Антенну в разъем “IN”
сетевого фильтра.
2. Подсоедините коаксиальный кабель из разъема
“OUT” сетевого фильтра к оборудованию, которое
вы хотите защитить.
D. Установка Сетевого Фильтра
Вы можете установить ваш сетевой фильтр как на полу,
так и вертикально с помощью двух винтов (не входят в
комплект поставки)
Индикатор выключателя
Применяется как мастер вкл/выкл для розеток.
Индикатор светится когда подключена нагрузка.
Гарантия
Гарантийный срок составляет 2 года с момента
приобретения устройства.
RU
CyberPower Systems
www.cyberpower.ru
© 2011 CyberPower Systems, Inc.
All rights reserved. All other
trademarks are the property of their respective owners
A
B
C
ВНИМАНИЕ:
ОПАСНОСТЬ ПОРАЖЕНИЕ ЭЛЕКТРИЧЕСКИМ
ТОКОМ – ИСПОЛЬЗУЙТЕ ТОЛЬКО В СУХИХ
МЕСТАХ И ТОЛЬКО ВНУТРИ ПОМЕЩЕНИЙ.
"НЕ ПОДКЛЮЧАЙТЕ К ДРУГОМУ СЕТЕВОМУ
ФИЛЬТРУ ИЛИ СЕТЕВОМУ УДЛИНИТЕЛЮ"
Это устройство имеет внутреннюю защиту, которая
отключит функцию защиты по мере использования
сетевого фильтра. После этого сетевой фильтр не
будет защищать подключенное оборудование


Product specificaties

Merk: CyberPower
Categorie: Niet gecategoriseerd
Model: SB0602BA-DE-W50

Heb je hulp nodig?

Als je hulp nodig hebt met CyberPower SB0602BA-DE-W50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd CyberPower

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd