CyberPower Rackbar RKBS20ST2F10R Handleiding

CyberPower Niet gecategoriseerd Rackbar RKBS20ST2F10R

Lees hieronder de πŸ“– handleiding in het Nederlandse voor CyberPower Rackbar RKBS20ST2F10R (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
RackBar(tm)
Surge
User Manual
RKBS15S2F8R
RKBS15S2F10R
RKBS15S2F12R
RKBS15S4F8R
RKBS15S4F10R
RKBS15S4F12R
RKBS15S6F8R
RKBS15S6F10R
RKBS15S6F12R
RKBS20S2F8R
RKBS20S2F10R
RKBS20S2F12R
RKBS20S4F8R
RKBS20S4F10R
RKBS20S4F12R
RKBS20S6F8R
RKBS20S6F10R
RKBS20S6F12R
RKBS20ST2F8R
RKBS20ST2F10R
RKBS20ST2F12R
RKBS20ST4F8R
RKBS20ST4F10R
RKBS20ST4F12R
RKBS20ST6F8R
RKBS20ST6F10R
RKBS20ST6F12R
RackBar Surge Unit (RKBS) (1) Cord Retention Tray (1)
Bracket Mounting
Screws M4 X 6 (4pcs)
Cord Retainer Clips
(8/10/12 pcs - varies by model ) for
Cord Retention Tray
Documentation:
User Manual
Power
Distribution
Unit
User Manual
Product Registration Card
Product
Registration
Card
Before using, please check to ensure the package contains all the
items shown above. If there are missing parts please contact
CyberPower technical support at www.CPSww.com or call 1-877-
297-6937.
Cord Retention Tray
Mounting Screws M3 X 6
(4/8/12/16 pcs - varies by model)
1. Amperage:
2. Series:
3. Outlet Number Front
4. Outlet Number Rear
Amperage – 15A, 20A
NULL: =NEMA 5-15P / 5-20P
T: = NEMA L5-20P
Number of Outlets followed by F – Example 8F
Number of Outlets followed by R – Example 8R
Horizontal Installation
Used (1 set) Vertical Installation
Used (1 set)
Mounting Brackets
Ground Screw M4 X 6 (1 pcs)
2. The RKBS must only be plugged into a three-wire, grounded outlet on a
circuit protected by a fuse or circuit breaker. Connection to any other type
of power outlet may result in a shock hazard.
3. Do not use extension cords or adapters with this RKBS.
4. Never install a RKBS, or associated wiring or equipment, during a
lightning storm.
5. Check that the power cord, plug, and socket are in good condition.
6. This device features an internal protection that will disconnect the surge
protective component at the end of its useful life but will maintain power to
the load – now unprotected. If this situation is undesirable for the
application, follow the manufacturer’s instructions for replacing the device.
7. To prevent the risk of fire or electric shock, this RKBS
should be installed in a temperature and humidity controlled indoor area
free of conductive contaminants. Do not install this RKBS where
excessive moisture or heat is present..
Step 1 – Mounting bracket installation
Install the screws (M4 X 6) in holes diagonal from each other.
Step 2 – RKBS Mounting
Install the RKBS using fasteners compatible with the rack.
Install the RKBS using fasteners compatible with the rack.
Step 1 – Mounting bracket installation
Step 2 – RKBS Mounting
Install the screws (M4 X 6) in holes diagonal from each other.
1. Use ONLY the supplied hardware (including screws, pegs
and cord retainer clips) to attach the mounting brackets. Using different
hardware or improper installations may cause damage that is NOT
covered by this warranty.


Product specificaties

Merk: CyberPower
Categorie: Niet gecategoriseerd
Model: Rackbar RKBS20ST2F10R

Heb je hulp nodig?

Als je hulp nodig hebt met CyberPower Rackbar RKBS20ST2F10R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd CyberPower

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024