CyberPower Rackbar RKBS20S4F10R Handleiding

CyberPower Niet gecategoriseerd Rackbar RKBS20S4F10R

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower Rackbar RKBS20S4F10R (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

RackBar(tm)

Surge

User Manual

RKBS15S2F8R

RKBS15S2F10R

RKBS15S2F12R

RKBS15S4F8R

RKBS15S4F10R

RKBS15S4F12R

RKBS15S6F8R

RKBS15S6F10R

RKBS15S6F12R

RKBS20S2F8R

RKBS20S2F10R

RKBS20S2F12R

RKBS20S4F8R

RKBS20S4F10R

RKBS20S4F12R

RKBS20S6F8R

RKBS20S6F10R

RKBS20S6F12R

RKBS20ST2F8R

RKBS20ST2F10R

RKBS20ST2F12R

RKBS20ST4F8R

RKBS20ST4F10R

RKBS20ST4F12R

RKBS20ST6F8R

RKBS20ST6F10R

RKBS20ST6F12R

RackBar Surge Unit (RKBS) (1) Cord Retention Tray (1)

Bracket Mounting

Screws M4 X 6 (4pcs)

Cord Retainer Clips

(8/10/12 pcs - varies by model ) for

Cord Retention Tray

Documentation:

User Manual

Power

Distribution

Unit

User Manual

Product Registration Card

Product

Registration

Card

Before using, please check to ensure the package contains all the

items shown above. If there are missing parts please contact

CyberPower technical support at www.CPSww.com or call 1-877-

297-6937.

Cord Retention Tray

Mounting Screws M3 X 6

(4/8/12/16 pcs - varies by model)

1. Amperage:

2. Series:

3. Outlet Number Front

4. Outlet Number Rear

Amperage – 15A, 20A

NULL: =NEMA 5-15P / 5-20P

T: = NEMA L5-20P

Number of Outlets followed by F – Example 8F

Number of Outlets followed by R – Example 8R

Horizontal Installation

Used (1 set) Vertical Installation

Used (1 set)

Mounting Brackets

Ground Screw M4 X 6 (1 pcs)

2. The RKBS must only be plugged into a three-wire, grounded outlet on a

circuit protected by a fuse or circuit breaker. Connection to any other type

of power outlet may result in a shock hazard.

3. Do not use extension cords or adapters with this RKBS.

4. Never install a RKBS, or associated wiring or equipment, during a

lightning storm.

5. Check that the power cord, plug, and socket are in good condition.

6. This device features an internal protection that will disconnect the surge

protective component at the end of its useful life but will maintain power to

the load – now unprotected. If this situation is undesirable for the

application, follow the manufacturer’s instructions for replacing the device.

7. To prevent the risk of fire or electric shock, this RKBS

should be installed in a temperature and humidity controlled indoor area

free of conductive contaminants. Do not install this RKBS where

excessive moisture or heat is present..

Step 1 – Mounting bracket installation

Install the screws (M4 X 6) in holes diagonal from each other.

Step 2 – RKBS Mounting

Install the RKBS using fasteners compatible with the rack.

Step 1 – Mounting bracket installation

Step 2 – RKBS Mounting

Install the screws (M4 X 6) in holes diagonal from each other.

1. Use ONLY the supplied hardware (including screws, pegs

and cord retainer clips) to attach the mounting brackets. Using different

hardware or improper installations may cause damage that is NOT

covered by this warranty.

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	Rackbar RKBS20S4F10R
Kleur van het product:	Zwart
Breedte:	1.75 "
Hoogte:	17.5 "
Snoerlengte:	4.57 m
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Certificering:	UL1363 UL1449, CSA C22.2
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-15 - 45 °C
Rack-montage:	Ja
Hoogte, in bedrijf:	0 - 3000 m
Hoogte bij opslag:	0 - 15000 m
Diepte (imperiaal):	2.25 "
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Surge energy rating:	1800 J
Aantal AC uitgangen:	14 AC-uitgang(en)
Nominale input voltage:	120 V
Stopcontacttypes:	NEMA 5–20R
EMI/RFI geluidsfiltering:	Ja
EMI/RFI ruisverzwakking:	50 dB