CyberPower Professional CSP606U42A Handleiding

CyberPower Niet gecategoriseerd Professional CSP606U42A

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower Professional CSP606U42A (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSP606U42A

Surge Protector. This manual explains the features and

operation of the CSP606U42A. Please take a few

moments to read this manual.

FEATURES

1. ON/OFF Reset Switch Breaker

Controls power to all outlets. The switch is also a 15 A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Surge Protected Indicator

Illuminated when the surge protection feature is

working properly.

3. Standard Grounded Outlets (6)

4. USB Charging Ports* (2)

Connect and charge up to two (2) USB devices using

the surge protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device

does not transfer data.

5. Low-Proﬁle Right-Angle Plug

6. Safe-fail Protection

Power is cut to connected equipment when the unit

can no longer provide surge protection.

SPECIFICATIONS

• Model Number: CSP606U42A

• Outlets: Standard Grounded Outlets (6), USB Charging

Ports (2)

• USB Charging Rating : 5 V/4.2A total

• Surge Protection: 900 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 4th/500 V (L-N, L-G, N-G)

• Maximum Peak Current: 45,000 A

• 3 AC Lines Protected:

L-N: 15,000A

L-G: 15,000A

N-G: 15,000A

The maximum surge possible on household wiring is

6,000 volts)

• Response Time: Less than 1 nanosecond

• Circuit Breaker: Resettable 15 Amp

• Plug Type: Low-Proﬁle, Right-Angle Plug

• Cord Length: 6 ft

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in

dry locations and only indoors. DO NOT plug into another

relocatable power tap. DO NOT “daisy chain” surge

protectors. DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not

available. DO NOT install this device if there is less than 10

meters (30 feet) or more of wire between the electrical

outlet and electrical service panel. DO NOT use for

medical or life support equipment. This device features an

internal protection that will disconnect the surge

protective component at the end of its useful life, but it

will maintain unprotected power to the load. If this

situation is undesirable for the application, follow the

manufacturer’s instructions for replacing the device.

TROUBLESHOOTING

▪ If the ON/OFF is switched OFF, the 15 Amp circuit

breaker may have tripped. Examine your connected

equipment and remove the device that is overloading the

circuit. Then, turn the ON/OFF switch back to RESET.

▪ If the protected indicator does not light, the surge

protector’s AC lines are no longer protected from surge.

The surge protector may have received a power surge or

spike beyond its speciﬁed limits that overloaded the

protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment as

designed, but it will not protect against future surges,

and spikes. It should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support Department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

8-Outlet Surge Protector

(6 AC & 2 USB Ports)

CSP606U42A

8-Outlet Surge Protector

(6 AC & 2 USB Ports)

CSP606U42A

PROTECTED

USB

4.2A

3 4

K01-0000693-01

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower CSP606U42A (the “product”). By

using the product, you consent to be bound by the terms

and conditions of this limited warranty and connected

equipment guarantee (together referred to as this

“warranty”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN

THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this limited warranty. It only covers the original purchaser

and ends if you no longer own the product. This warranty

covers defects in materials and workmanship in the product

under normal use and conditions. It also covers equipment

connected to the product damaged because of the failure of

the product. This warranty covers the product and

connected equipment for as long as you own the product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937, or write to us at:

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379,

or send us an email at claims@cpsww.com within 10 days

of the occurrence for instructions.

2. When you contact CyberPower, identify the product, the

purchase date, and the item(s) of connected equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

initial customer, and request a claim number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the CyberPower unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and the item(s)

of connected equipment, a repair cost estimate for the

damage to the connected equipment, and all claim forms

that CyberPower provides to you. Show the claim number

on the shipping label, or include it with the product. You

must prepay all shipping costs. You are responsible for

packaging and shipment, and you must pay the cost of

the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the

product is defective in material or workmanship, CyberPower

will replace it at CyberPower’s expense, or CyberPower will

refund the full purchase price you paid for the product

(purchase receipt showing price paid is required). If the

product failed to protect any equipment plugged into it, we

will also send you forms for making your claim for the

connected equipment. We will replace the equipment that

was damaged because of the failure of the product or pay

you the fair market value (NOT REPLACEMENT COST) of

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

the equipment at of the time of the damage. We will use Orion

Blue Book, another third-party valuation guide, eBay, Craigslist,

or other source to establish that amount. Our maximum liability

is limited to $75,000 for the CSP606U42A.

Who pays for shipping?

We pay shipping when we send items to you; you pay when

you send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT

WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED

DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA THAT

IS LOST AS A RESULT OF THE FAILURE. THIS WARRANTY

DOES NOT COVER THE RESTORATION OF DATA OR

RECORDS, OR THE REINSTALLATION OF SOFTWARE.

2. This warranty does not cover: misuse, modiﬁcation, operation

or storage outside of the environmental limits of the product

or the equipment connected to it. It does not cover damage

while in transit or in storage; if there has been improper

operation or maintenance, or use with items not designed or

intended for use with the product, such as laser printers,

appliances, aquariums, medical, or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the initial customer are

those provided by this warranty.

1. This warranty does not apply unless the product and the

connected equipment were connected to properly wired and

grounded outlets (including compliance with electrical and

safety codes of the most current electrical code), without the

use of any adapters or other connectors.

2. The product must have been plugged directly into the power

source. The equipment connected to the product must be

directly connected in the product, not “daisy chained”

together in serial fashion with any extension cords, another

product, or device similar to the product, surge suppressor,

or power tap. Any such installation voids the warranty.

3. The product and connected equipment must have been used

properly in a suitable environment, in conformance with any

applicable license, instruction manual, or warnings.

4. The product must have been used at all times within the

limitations on the product’s maximum rated wattage.

Where can I get more information?

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379;

Call us at (877) 297-6937;

Send us an email message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the limited

warranty, and also allows the opportunity of notiﬁcations for

product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to the Product Registration

Page at CyberPowerSystems.com/registration.

This device is manufactured using environmentally-safe procedures in

compliance with the Restriction of Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the environment by recycling.

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

UL Listed to U.S. and Canadian Safety Standards UL 1449. This product

is listed to applicable U.S. and Canadian safety standards by

Underwriters Laboratories Inc.

WARNING: This product can expose you to chemicals including styrene (ABS),

which is known to the State of California to cause cancer.

For more information, go to www.P65Warnings.ca.gov.

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

WARNING: Changes or modiﬁcations not expressly approved

by the party responsible for compliance could void the user's

authority to operate the equipment.

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	Professional CSP606U42A
Kleur van het product:	Wit
Snoerlengte:	1.8 m
LED-indicatoren:	Ja
Type verpakking:	Doos
Meegeleverde kabels:	AC
Aantal USB-aansluitingen:	2
Responstijd:	0.001 ms
Duurzaamheidscertificaten:	RoHS
Opladen via USB:	Ja
Stekker:	NEMA 5–15R
Aantal producten inbegrepen:	1 stuk(s)
Surge energy rating:	900 J
Aantal AC uitgangen:	6 AC-uitgang(en)
Nominale input voltage:	125 V
Stopcontacttypes:	NEMA 5–15R
Veilig voor kinderen:	Ja
Klem voltage:	500 V