CyberPower OL6KRT2UTFHWIOR Handleiding

CyberPower Niet gecategoriseerd OL6KRT2UTFHWIOR

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower OL6KRT2UTFHWIOR (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

User’s Manual

Step-Down Transformer

OL6KRT2UTF HWIO

OL10KRT2UTF HWIO

OL6KRT2UTF R HWIO

OL10KRT2UTF R HWIO

CyberPower Systems (USA), Inc.

4241 12th Avenue East Suite 400 Shakopee, MN 55379

Phone: 877-297-6937

Fax: 952-403-0009

www.CPSww.com

K01-0000 -01 362

OVERVIEW

The CyberPower Step-Down and Isolation Transformers support installation with hardwire ( 6KRT2UTF OL10KRT2UTF OL HWIO / HWIO /

OL6KRT2UTF R OL10KRT2UTF R), and are designed for variety of CyberPower UPS systems. When combin with the UPS, the Step-Down HWIO / HWIO a ed

configuration convert voltage from 200-240V down to 100-12s 0V. The Isolation configuration provides the UPS and connected equipment from any outside

utility line fluctuations or interference.

2U Step-Down and Isolation Transformer

User’s manual Registration card

Rackmount left rail Rackmount right rail

Tie plate (1) * 1 set

2U Rackmount ears (Stands) (2) * 1 set

Input/output terminal block cover (1)

Flat head screws M5X8L (8) * 1 set :

Pan head screws M5X12L (12) * 1 set :

Plastic washers (8) * 1 set

Screw hole dust covers (10) * 1 set

Cable for 6K UPS output 6K STF i connection (1) to nput

(Only for 6K STF)

Conduits with internal wires for 8K/10K UPS output to

10K STF input connection (1)

(Only for 10K STF)

Cable glands (2)

UNPACKING

HARDWARE INSTALLATION

These versatile Step-Down Transformers can be mounted in a rackmount

or vertical tower orientation. This versatility is especially important to

growing organizations with changing needs that value having the option

to position a Step-Down Transformer on a floor or in a rackmount system.

Please follow the instructions below for the respective mounting met s.hod

SAFETY PRECAUTIONS

CAUTION! To prevent the risk of fire or electric shock, only use the

supplied hardware to attach the mounting brackets.

RACKMOUNT INSTALLATION

Step 1: Rackmount e s installation ar

Attach the two rackmount e s to the Step-Down Transformer using the ar

provided screws M5X8L*8pcs.

Step 2: Rackmount rail Installation

The rails adjust to mount in 48-cm (19-inch) panel racks from to 52

91.5cm (20.5 to inches) deep Select the proper holes in the rack for 36 .

positioning the Step-Down Transformer in the rack. The 2U Step-Down

Transformer takes up position 1 through position 6. The 3U Step-Down

Transformer takes up position 1 through position 9.

Step 3 Adjust rackmount rails to fit your rack :

Attach the rackmount rail to your rack with two M5X12L screws and two

plastic washers at the front of the rack. (Located in position 1 & position 6)

Do not tighten the screws. Adjust the rail size on the rail assembly of your

rack. Secure the rail to the rear of the rack with two M5X12L screws and

two plastic washers. Tighten all screws at the front and rear of the rail.

Place the Step-Down Transformer on a flat stable surface with the front of

the unit facing toward you. Secure the Step-Down Transformer to your

rack with four M5X12L screws at the front of the rack. The 2U Step-Down

Transformer takes up position 2 through position 5. The 3U Step-Down

Transformer takes up position 2 through position 8.

CAUTION! T Step-Down Transformer must be installed above the he

power module.

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	OL6KRT2UTFHWIOR
Kleur van het product:	Zwart
Gewicht:	43400 g
Breedte:	433 mm
Diepte:	660 mm
Hoogte:	88.9 mm
Certificering:	UL, cUL, CE, RoHS
Nominale input voltage:	200, 208, 220, 230, 240 V