CyberPower HT1006U Handleiding

CyberPower Niet gecategoriseerd HT1006U

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower HT1006U (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 208 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower HT1006U Surge

Protector. The information contained in this brochure

explains the features and operation of the HT1006U. Please

take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Ground Indicator LED

Illuminated when the Ground protection feature is

working properly.

3. Surge Protected Indicator

Illuminated when the surge protection feature is working

properly.

4. Six Standard Outlets and Four Transformers

Safety Covers

Slide the plastic outlet cover over outlets that are not

used. This ensures the safety of children and prevents

potential electric shocks and damage caused by a highly

dusty environments.

5. USB Charging Ports*

Connect and charge up to two (2) USB devices using the

surge protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device

does not transfer data.

SPECIFICATIONS

• Model Number: HT1006U

• Outlets: 6 Standard Outlets and 4 Transformers

• Power Cord length: 6 ft

• Surge Protection: 3,600 Joules

• Electrical Rating: 125V/15A/1875W

• UL Clamping Voltage: UL 1449 3rd/500V (H-N, H-G, N-G)

• Maximum Peak Current: 135,000A

• 3 AC Lines Protected: H-N: 75,000A, H-G: 30,000A, N-G:

30,000A; (The maximum surge possible on household

Wiring is 6,000 volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 32dB

• EMI/RFI Filtration: 150 kHz to 100 MHz

• USB Charger Rating: 5V/2.4A total

• Circuit Breaker: Resettable 15 Amp

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only

in dry locations and only indoors. DO NOT plug into

another relocatable power tap. DO NOT “daisy chain”

surge protectors. DO NOT use with any aquarium

equipment. DO NOT use if properly grounded outlets are

not available. install this device if there is not at DO NOT

least 10 meters (30 feet) or more of wire between the

electrical outlet and electrical service panel. This device

features an internal protection that will disconnect the

surge protective component at the end of its useful life,

but will maintain power to the load – now unprotected.

TROUBLESHOOTING

If the indicator does not light when you plug in Grounded

the surge protector, move the surge protector to a

dierent grounded three-prong AC outlet. If it still does

not light, return the product to dealer for assistance. If

the surge protector proves to be working properly, your

outlets may not be a properly grounded and need to be

repaired by a professional electrician. If the Grounded

indicator turns o after a period of use, the surge

protection has been depleted. Replace your surge

protector.

If the Protected indicator does not light, the surge

protector’s AC lines is no longer protected from surge.

Replace the surge protector. The surge protector may

have received a power surge or spike beyond its

speciﬁed limits that overloaded the protection circuitry

and rendered it inactive. The surge protector has

protected your connected equipment, but it will not

protect against future surges and spikes.

TECHNICAL SUPPORT

Please contact our Tech Support department with

installation, troubleshooting, or general product

questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation: Monday – Friday, 7:00am – 6:00pm

CST

USER’S MANUAL

10-Outlet Surge Protector

HT1006U

10-Outlet Surge Protector

HT1006U

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower HT1006U (the “CPS Product”). By

using the CPS Product, you consent to be bound by the

terms and conditions of this Limited Warranty and

Connected Equipment Guarantee (together referred to as

this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS

AND CONDITIONS OF THIS WARRANTY, YOU SHOULD

RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO

USING IT.

Who is providing this Warranty, what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”)

provides this Limited Warranty. It only covers the original

purchaser and ends if you no longer own the CPS Product.

This warranty covers defects in materials and

workmanship in the CPS Product under normal use and

conditions. It also covers equipment connected to the CPS

Product and damaged because of the failure of the CPS

Product. This warranty covers the CPS Product and

connected equipment for as long as you own the CPS

Product.

What must I do to make a warranty claim?

1. Call us at (877) 297-6937 or write to us at Cyber Power

Systems (USA), Inc., 4241 12th Ave. E., STE 400,

Shakopee, MN 55379, or send us an e-mail message at

claims@cpsww.com for instructions, within 10 days of

the occurrence.

2. When you contact CyberPower, identify the Product,

the Purchase Date, and the item(s) of Connected

Equipment. Have information on all applicable insurance

or other resources of recovery/payment that are

available to the Initial Customer and Request a Claim

Number.

3. You must provide a dated purchase receipt (or other

proof of the original purchase) for the CyberPower unit

and connected equipment. You also need to provide a

description of the damage to your connected

equipment.

4. Pack and ship the product to CyberPower and, if

requested, the item(s) of Connected Equipment, a

repair cost estimate for the damage to the Connected

Equipment, and all claim forms that CyberPower

provides to you. Show the Claim Number on the

shipping label or include it with the product. You must

prepay all shipping costs, you are responsible for

packaging and shipment, and you must pay the cost of

the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If

the CPS Product is defective in material or workmanship,

CyberPower will repair or replace it at CyberPower’s

expense, or CyberPower will refund the full purchase price

you paid for the CPS Product (purchase receipt

showing price paid is required). If the CPS Product failed

to protect any equipment plugged into it, we will also

send you forms for making your claim for the connected

equipment. We will repair or replace the equipment that

was damaged because of the failure of the CPS Product

or pay you the fair market value (NOT REPLACEMENT

COST) of the equipment at of the time of the damage.

We will use Orion Blue Book, another a third-party

valuation guide, eBay, craigslist, or other source to

establish that amount. Our maximum liability is limited to

$350,000 for the HT1006U.

Who pays for shipping?

We pay when we send items to you; you pay when you

send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY

SOFTWARE THAT WAS DAMAGED OR NEEDS TO BE

REPLACED DUE TO THE FAILURE OF THE CPS

PRODUCT OR ANY DATA THAT IS LOST AS A RESULT

OF THE FAILURE OR THE RESTORATION OF DATA OR

RECORDS, OR THE REINSTALLATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modiﬁcation,

operation or storage outside environmental limits of

the CPS Product or the equipment connected to it, or

for damage while in transit or in storage, nor if there

has been improper operation or maintenance, or use

with items not designed or intended for use with the

CPS Product, such as laser printers, appliances,

aquariums, medical or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer

are those provided by this Warranty.

1. This Warranty does not apply unless the CPS Product

and the connected equipment were connected to

properly wired and grounded outlets (including

compliance with electrical and safety codes of the

most current electrical code), without the use of any

adapters or other connectors.

2. The CPS Product must have been plugged directly into

the power source and the equipment connected to the

CPS Product must be directly connected in the CPS

Product, not “daisy-chained” together in serial fashion

with any extension cords, another Product or device

similar to the CPS Product, surge suppressor, or power

tap. Any such installation voids the Warranty.

3. The CPS Product and connected equipment must have

been used properly in a suitable and proper

environment, in conformance with any applicable

license, instruction manual, or warnings.

4. The CPS Product must have been used at all times

within the limitations on the CPS Product’s VA

capacity.

3 4

This device is manufactured using environmentally-safe

procedures in compliance with the Restriction of

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400,

Shakopee, MN 55379; call us at (877) 297-6937; or send us

an e-mail message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the

Limited Warranty, and also allows the opportunity to be

notiﬁed of product enhancements, upgrades, and other

announcements.

Registration is quick and easy. Go to Product Registration

page at www.cyberpower.com.

CONTACT INFORMATION

Cyber Power Systems, Inc. 4241 12th Avenue East Suite

400 Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPower.com

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, And

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Warning: Changes or modiﬁcations to this unit not

expressly approved by the party responsible for

compliance could void the user’s authority to operate the

equipment. This Class B digital apparatus complies with

Canadian ICES-003.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Cyber Power Systems, Inc.

www.cyberpower.com

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	HT1006U
Kleur van het product:	Zwart
Snoerlengte:	1.8 m
LED-indicatoren:	Ja
Aantal USB-aansluitingen:	2
Responstijd:	0.001 ms
Duurzaamheidscertificaten:	RoHS
Opladen via USB:	Ja
Aantal producten inbegrepen:	1 stuk(s)
Surge energy rating:	3600 J
Aantal AC uitgangen:	10 AC-uitgang(en)
Nominale input voltage:	125 V
Stopcontacttypes:	NEMA 5–15R
Veilig voor kinderen:	Ja
Nominale stroom output:	15 A
EMI/RFI geluidsfiltering:	Ja
Klem voltage:	500 V