CyberPower Home Theater HT705UC Handleiding

CyberPower Niet gecategoriseerd Home Theater HT705UC

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower Home Theater HT705UC (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 236 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower HT705UC

Premium Surge Protector. The information contained in

this manual explains the features and operation of the

HT705UC. Please take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

Firestop Design Advanced Metal-Oxide Varistor

(MOV) with Built-In Fuses

Encased component dissipates surge events and

potential ﬂame, sparks and heat.

Wrapped Cord and Right Angle Plug

Easy coil kink and abrasion resistant cord with to ;

low proﬁle right angle plug for easy cord

management. Advanced Protection - Surge

Protected LED Illuminated when protection is

working properly. Clean Power - Ground LED

Illuminated when properly grounded.

6. Seven Outlets

6 standard and 1 transformer spaced outlets

7. USB Charging Ports*

Connect and charge up to 2 USB devices using the

surge protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device

does not transfer data.

8. Coaxial Cable Protection

Protects coaxial lines from surges and spikes.

SPECIFICATIONS

• HT705UCModel Number:

• 6 standard and 1 transformer spaced outletsOutlets:

• 5V/3.1A totalUSB Charging Rating:

• Power Cord Length: 5 ft

• Surge Protection: 3,480 Joules

• 125V/15A/1875WElectrical Rating:

• UL Clamping Voltage: UL 1449 3rd/500V (L-N, L-G, L-G)

• 105,000AMaximum Peak Current:

• 3 AC Lines Protected: H-N: 75,000A, H-G: 15,000A,

N-G: 15,000A (The maximum surge possible on

household Wiring is 6,000 volts)

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only

in dry locations and only indoors. DO NOT plug into

another relocatable power tap. DO NOT “daisy chain”

surge protectors. DO NOT use with any aquarium

equipment. DO NOT use if properly grounded outlets are

not available. DO NOT install this device if there is not at

least 10 meters (30 feet) or more of wire between the

electrical outlet and electrical service panel. This device

features an internal protection that will disconnect the

surge protective component at the end of its useful life,

but will maintain power to the load – now unprotected.

TROUBLESHOOTING

If the grounded indicator does not light when you plug in

the surge protector, move the surge protector to a

dierent grounded three-prong AC outlet. If it still does

not light, return the product to dealer for assistance. If

the surge protector proves to be working properly, your

outlets may not be a properly grounded and need to be

repaired by a professional electrician. If the grounded

indicator turns o after a period of use, the surge

protection has been depleted. Replace your surge

protector. If the protected indicator does not light, the

surge protector’s AC lines is no longer protected from

surge. The surge protector may have received a power

surge or spike beyond its speciﬁed limits that overloaded

the protection circuitry and rendered it inactive. The

surge protector has protected your connected

equipment as designed, but it will not protect against

future surges & spikes and should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER’S MANUAL

7-Outlet Surge Protector

HT705UC

7-Outlet Surge Protector

HT705UC

1 2

3.1A

AD VAN CE D

PR OTE CT IO N

PO WE R

CL EAN

• Less than 1 nanosecondResponse Time:

• Attenuation: Up to 43dB

• EMI/RFI Filtration: 150 kHz to 100 MHz

• Circuit Breaker: Resettable 15 Amp

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower HT705UC (the “CPS Product”). By

using the CPS Product, you consent to be bound by the

terms and conditions of this Limited Warranty and

Connected Equipment Guarantee (together referred to as

this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS

AND CONDITIONS OF THIS WARRANTY, YOU SHOULD

RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO

USING IT.

Who is providing this Warranty, what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this Limited Warranty. It only covers the original purchaser

and ends if you no longer own the CPS Product. This

warranty covers defects in materials and workmanship in the

CPS Product under normal use and conditions. It also covers

equipment connected to the CPS Product and damaged

because of the failure of the CPS Product. This warranty

covers the CPS Product and connected equipment for as

long as you own the CPS Product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937 or write to us at Cyber Power

Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN

55379, or send us an e-mail message at claims@cpsww.com

for instructions, within 10 days of the occurrence.

2. When you contact CyberPower, identify the Product, the

Purchase Date, and the item(s) of Connected Equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

Initial Customer and Request a Claim Number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the Cyber Power unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and, if

requested, the item(s) of Connected Equipment, a repair

cost estimate for the damage to the Connected

Equipment, and all claim forms that CyberPower provides

to you. Show the Claim Number on the shipping label or

include it with the product. You must prepay all shipping

costs, you are responsible for packaging and shipment,

and you must pay the cost of the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If the

CPS Product is defective in material or workmanship,

CyberPower will repair or replace it at CyberPower’s

expense, or CyberPower will refund the full purchase price

you paid for the CPS Product (purchase receipt showing

price paid is required). If the CPS Product failed to protect

any equipment plugged into it, we will also send you forms

for making your claim for the connected equipment. We will

repair or replace the equipment that was damaged because

of the failure of the CPS Product or pay you the fair market

value (NOT REPLACEMENT COST) of the equipment at of

the time of the damage. We will use Orion Blue Book,

another third-party valuation guide, eBay, craigslist, or other

source to establish that amount. Our maximum liability is

limited to $800,000 for the HT705UC.

Who pays for shipping?

We pay when we send items to you; you pay when you send

items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE

THAT WAS DAMAGED OR NEEDS TO BE REPLACED DUE

TO THE FAILURE OF THE CPS PRODUCT OR ANY DATA

THAT IS LOST AS A RESULT OF THE FAILURE OR THE

RESTORATION OF DATA OR RECORDS, OR THE

REINSTALLATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modiﬁcation,

operation or storage outside environmental limits of the

CPS Product or the equipment connected to it, or for

damage while in transit or in storage, nor if there has been

improper operation or maintenance, or use with items not

designed or intended for use with the CPS Product, such

as laser printers, appliances, aquariums, medical or life

support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are

those provided by this Warranty.

1. This Warranty does not apply unless the CPS Product and

the connected equipment were connected to properly

wired and grounded outlets (including compliance with

electrical and safety codes of the most current electrical

code), without the use of any adapters or other connectors.

2. The CPS Product must have been plugged directly into the

power source and the equipment connected to the CPS

Product must be directly connected in the CPS Product,

not “daisy-chained” together in serial fashion with any

extension cords, another Product or device similar to the

CPS Product, surge suppressor, or power tap. Any such

installation voids the Warranty.

3. The CPS Product and connected equipment must have

been used properly in a suitable and proper environment,

in conformance with any applicable license, instruction

manual, or warnings.

4. The CPS Product must have been used at all times within

the limitations on the CPS Product’s VA capacity. This device is manufactured using environmentally-safe

procedures in compliance with the Restriction of

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

3 4

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,

MN 55379; call us at (877) 297-6937; or send us an e-mail

message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the

Limited Warranty, and also allows the opportunity to be notiﬁed

of product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to Product Registration

page at www.cyberpowersystems.com/registration.

CONTACT INFORMATION

Cyber Power Systems, Inc. 4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference. (2) This device must accept

any interference received, including interference that may

cause undesired operation.

Warning: Changes or modiﬁcations to this unit not expressly

approved by the party responsible for compliance could void

the user’s authority to operate the equipment. This Class B

digital apparatus complies with Canadian ICES-003.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

K01-0000632-00

www.cyberpowersystems.com

All other trademarks are the property of their respective owners.

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	Home Theater HT705UC

Heb je hulp nodig?

Als je hulp nodig hebt met CyberPower Home Theater HT705UC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd CyberPower

CyberPower BPS240V9A Handleiding

7 November 2024

CyberPower CPS3500PIE Handleiding

7 November 2024

CyberPower SB0602BA-DE-B50 Handleiding

24 September 2024

CyberPower SB0802AD-DE-W24 Handleiding

24 September 2024

CyberPower SB0502BA-DE-B70 Handleiding

24 September 2024

CyberPower SB0502BA-DE-W70 Handleiding

24 September 2024

CyberPower SB0702AD-DE-B30 Handleiding

24 September 2024

CyberPower SB0602BA-DE-W18 Handleiding

24 September 2024

CyberPower SB0702AD-DE-W30 Handleiding

24 September 2024

CyberPower SB0502BA-DE-B50 Handleiding

24 September 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024

Sabrent SB-HTSS Handleiding

21 December 2024