Cudy POE10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Cudy POE10 (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
User Manual
Model: POE10
Examples for full power PoE Devices (that are PoE Class 0 or 3, or
require under 12 watts).
Multiple PoE Extenders can be connected every 100 meters to
obtain greater distances.The actual figures depend on operating
conditions.The range is over 24AWG or heavier Cat-5e or Cat-6
cable except where specified.
Examples for medium power PoE Devices (that are PoE Class 2,
or require under 6 watts)
Maximum Distances for Power Sources
5
PoE Source Maximum Distances
PoE switch
(802.3af,Output voltages 50V) 300M
300M
400M
400M
15W mid-span
(802.3af,Output voltages 50V)
PoE+ switch
(802.3at,Output voltages 50V)
30W mid-span
(802.3at,Output voltages 50V)
PoE Source Maximum Distances
PoE switch
(802.3af,Output voltages 50V) 200M
200M
300M
300M
15W mid-span
(802.3af,Output voltages 50V)
PoE+ switch
(802.3at,Output voltages 50V)
30W mid-span
(802.3at,Output voltages 50V)
Examples for PoE+ Devices (that are PoE Class 4 that under 22
watts, or 802.3at compliant)
PoE Source Maximum Distances
PoE switch
(802.3af,Output voltages 50V) Not applicable
Not applicable
200M
200M
15W mid-span
(802.3af,Output voltages 50V)
PoE+ switch
(802.3at,Output voltages 50V)
30W mid-span
(802.3at,Output voltages 50V)
For support and warranty, please visit: http://www.cudy.com/.
Specifications are subject to change without notice. Cudy is a
registered trademark of Shenzhen Cudy Technologies Co., Ltd.
Other brands and product names are trademarks or registered
trademarks of their respective holders.
Copyright©Shenzhen Cudy Technology Co., Ltd. All rights reserved.
EU Address: Otto esser 2c, 65451 Kelsterbach, Germany
EU declaration of conformity
Support and Warranty
Cudy hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of
directives 2014/30/EU, 2014/35/EU, 2009/125/EC and
2011/65/EU.The original EU declaration of conformity may be
found at http://www.cudy.com/
810600069
Mounting
Environment
Operating Humidity
Storage Temperature
Storage Humidity:
Operating Ambient
Temperature
Wall or shelf
Indoor or Outdoor
Regulatory Compliance
-10 to 45
-20 to 60
Maximum 95%, Non-condensing
IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Maximum 90%, Non-condensing
Dimensions 145mm x 60mm x 40mm
Model
No. of channels
Pass Through
Data Rates
POE10
Power over
Ethernet input
Pin Assignment and Polarity:
Both 1/2(-), 3/6(+) and 4/5(+), 7/8(-)
Power over
Ethernet Output
Pin Assignment and Polarity: 1/2 (+), 3/6 (-)
Output Power: up to 22W
Power indicator: PoE enabled
Network indicator: Link/Act
Connectors
Indicators
Network cables
1(PoE IN) into 1(PoE OUT)
10/100/1000 Mbps half/full duplex
Shielded RJ-45, EIA568Aand 568B
Shielded category 5 (or higher)
Specifications
4
Cudy Gigabit PoE+ Extender helps install PDs (such as IP
Security Cameras, wireless access points) at greater distances
than 100 meters. By connecting PoE+ Extender for every extra
100 meters of cable, both Ethernet and PoE can be extended
to up to a total distance of 200 meters. It does not require any
additional power supply , the connected PDs is fed by an
single PoE switch or mid-span, which simplifies installation.
Features
3
Description
2
IEEE802.3at / IEEE802.3af Compliant
10/100/1000Mbps Ethernet Ports
Wall-Mount design for any application scenario
Easy plug-and-play installation
No additional power supply is required
One PoE extender extends additional 100 meters for PoE network
Support up to 3 PoE Extenders for a total extension of 400 meters
Hardware Connection
1
Support up to 3 PoE+ Extenders for 400 Meters Distance
Gigabit
PoE Extender
IN OUT
PoE+ Extender CameraPoE+ Switch
MAX 100Meters MAX 100Meters
Gigabit
PoE Extender
IN OUT
Gigabit
PoE Extender
IN OUT
Gigabit
PoE Extender
IN OUT
PoE+ Extender PoE+ Extender PoE+ Extender CameraPoE+ Switch
100Meters 100Meters 100Meters 100Meters


Product specificaties

Merk: Cudy
Categorie: Netwerkkaart/adapter
Model: POE10
Kleur van het product: Wit
Breedte: 145 mm
Diepte: 60 mm
Hoogte: 40 mm
Gebruikershandleiding: Ja
LED-indicatoren: Activity, Link, PoE
Type verpakking: Doos
Aantal Ethernet LAN (RJ-45)-poorten: 1
Plug and play: Ja
Aantal per verpakking: 1 stuk(s)
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Bekabelingstechnologie: 10/100/1000Base-T(X)
Netwerkstandaard: IEEE 802.3af, IEEE 802.3at
Uitgangsvermogen: 22 W
Temperatuur bij opslag: -40 - 70 °C
Luchtvochtigheid bij opslag: 5 - 95 procent
Ethernet interface type: Gigabit Ethernet
Hostinterface: RJ-45
Ophangsysteem voor aan de muur: Ja
Power over Ethernet (PoE): Ja
RJ-45 uitgang ports: 1
Maximale afstand: 100 m
Maximum indoorbereik: 100 m
Maximum outdoorbereik: 100 m
Gemakkelijk te installeren: Ja
RJ-45 invoer ports: 1
Maximaal bereik: 100 m
Bedrijfstemperatuur (T-T): -40 - 45 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 90 procent
Totaal Power over Ethernet (PoE)-budget: 22 W
Hoeveelheid Power over Ethernet (PoE) ports: 1
Ondersteundende kabel types: Cat5, Cat5e, Cat6, Cat6+, Cat6a, Cat6e, Cat7, Cat7e, Cat8, Cat8.1
Duplex systeem: Full, Half
Vermogen per poort Power over Ethernet (PoE): 22 W
Stroom via Ethernet (PoE): - V
Pintoewijzing & polariteit: 1/2 (-), 3/6 (+), 7/8 (-), 4/5 (+)

Heb je hulp nodig?

Als je hulp nodig hebt met Cudy POE10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Netwerkkaart/adapter Cudy

Handleiding Netwerkkaart/adapter

Nieuwste handleidingen voor Netwerkkaart/adapter