Cudy FS1010P Handleiding

Cudy Schakelaar FS1010P

Lees hieronder de 📖 handleiding in het Nederlandse voor Cudy FS1010P (2 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Physical Appearance2

Speciﬁcations3

Hardware Connection

Working Temperature

Bandwidth

Storage Temperature

Working humidity

Storage humidity

Working hight

Storage hight

-20~50℃

-40~80℃

Max relative humidity 90%, non-condensing

Max relative humidity 95%, non-condensing

Max 10,000 feet（3,000 meters）

Max 10,000 feet（3,000 meters)

Model FS1010P

Network Protocol

PoE Standard

POE port output

Power Pin

AC Input Voltage

Output

Total Power

Dimension(L×W×H)

Power Socket

Ethernet Device

(switch, router, etc.)

Wireless AP Smart VoIPIP Camera

Powered Device (PD)

Internet

Front board

Back board

Ethernet PoE Port Ethernet Port

Power input port

IEEE802.3 / IEEE802.3u

IEEE802.3x / IEEE802.3af/at

IEEE802.3at (30W) and IEEE802.3af (15.4w)

DC 52V

Power over spare pairs 1/2(+) , 3/6 (-)

AC100~240V

52V ~ 2.3A

120W

200mm*120mm*45mm

8-Port 10/100M PoE+ Switch

with 2 Uplink Ports

FS1010P

1 3 5 7

Extend

Normal

VLAN

1 2 3 4 5 6 7 8 9 10PWR SW

8-Port 10/100M PoE+ Switch

with 2 Uplink Ports

FS1010P

1 3 5 7

Extend

Normal

VLAN

1 2 3 4 5 6 7 8 9 10PWR SW

NVR Monitor

Router

AC INPUT

100V-240V

MAC Address

Packet Buffer Memory

Forwarding Mode

1K MAC address table

2Gbps (non-blocking)

448K

Store-And-Forward

Q I a Guick nstall tion uide

Model: FS1010P

EU declaration of conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The

original EU declaration of conformity may be found at http://www.cudy.com/

810600056

Email: support@cudy.com

www.cudy.com

LED and Interface Explanation

PWR

SW Mode

Link ACT

Power LED

DIP LED

Link LED

OFF

Flashing

OFF

Flashing

Powered

No power

Port Isolation

Standard switching

Link extension

Link connected

Link disconnected

Link data transmitted

DIP Explanation

VLAN

Default

Extend

Port Isolation

Standard Switch

Link Extension

Downlink designated ports are isolated

from each other, only transmit data with

the uplink port.

All ports communicate freely

The speciﬁed port speed drops to 10Mbps/s,

max PoE transmission is 250 meters.

Product specificaties

Merk:	Cudy
Categorie:	Schakelaar
Model:	FS1010P
Kleur van het product:	Zwart
Breedte:	220 mm
Diepte:	150 mm
Hoogte:	44 mm
Materiaal behuizing:	Metaal
Stroombron:	AC
LED-indicatoren:	Activity, Link, PoE, Power
Type verpakking:	Doos
Meegeleverde kabels:	AC
Snelstartgids:	Ja
Plug and play:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Netwerkstandaard:	IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x
Temperatuur bij opslag:	-40 - 70 °C
Luchtvochtigheid bij opslag:	5 - 90 procent
Mean time between failures (MTBF):	50000 uur
Vermogenstoevoer inclusief:	Ja
VLAN=ondersteuning:	Ja
Power over Ethernet (PoE):	Ja
Switchingcapaciteit:	- Gbit/s
MAC-adrestabel:	8000 entries
Datastroombeheer:	Ja
Aantal basis-switching RJ-45 Ethernet-poorten:	8
Netstekker:	AC-in-aansluiting
Bandbreedte:	2 Gbit/s
Type basis-switching RJ-45 Ethernet-poorten:	Fast Ethernet (10/100)
Packet buffergeheugen:	0.25 MB
Jumbo Frames ondersteuning:	Ja
Full duplex:	Ja
Koperen ethernetbekabelingstechnologie:	10BASE-T, 100BASE-TX
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Totaal Power over Ethernet (PoE)-budget:	120 W
Aantal Power over Ethernet plus (PoE +)-poorten:	2
Verzending snelheid:	1.48 Mpps
Jumbo frames:	1528
Hoeveelheid Power over Ethernet (PoE) ports:	8
Fanloos:	Ja
Store-and-forward:	Ja
Ondersteundende kabel types:	Cat3, Cat4, Cat5, Cat5e
Spanningsbeveiliging:	Ja
Vermogen per poort Power over Ethernet (PoE):	30 W
Half-duplex:	Ja
Overspanningsbeveiliging in voltage:	4 kV
Aantal uplinkpoorten:	2