Crucial DDR3-1600 SODIMM Handleiding

Crucial Niet gecategoriseerd DDR3-1600 SODIMM

Lees hieronder de 📖 handleiding in het Nederlandse voor Crucial DDR3-1600 SODIMM (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Install Guide

General Memory Module Installation

Equipment needed

• Memory module(s)

• Non-magnetic-tip screwdriver (for removing the cover

on your computer)

• Your system’s owner’s manual

Installation process

1. Make sure that you are working in a static-safe

environment. Remove any plastic bags or papers from

your work space.

2. Shut down your system and make sure the power is

completely oﬀ before unplugging the power cable from

your computer. For laptops, then remove the battery.

3. Discharge residual power by pressing the power button.

4. Remove your computer’s cover. Refer to your owner’s

manual for how to do this.

5. To protect your new memory modules and your

system’s components from static damage during the

installation process, touch any of the unpainted metal

surfaces on your computer’s frame before handling and

installing memory.

6. Using your system’s owner’s manual, locate your

computer’s memory expansion slots. Do not use any

tools in the removal or installation of memory modules.

7. Insert your new memory module(s) in accordance with

the illustrations in this guide. Align the notch(es) on the

module with the notch(es) in the slot, and then press

the module down until the clips on the slot snap into

place. (It can take 20 to 30 pounds of pressure to install

a module.) Fill the memory slots on your computer

starting with the highest density (i.e. put the highest

density module in bank 0).

8. Once the module(s) have been installed, replace the

cover on your computer and reconnect the power cord

or battery. Installation is now complete.

Desktop, server, and printer memory installation (DIMM modules)

Using ﬁrm, even pressure, push DIMM into socket until

clips snap into place. Do not assist clips.

Laptop memory installation (SODIMM modules)

Firmly push SODIMM in at 45° angle, and then push down

until clips snap into place.

Helpful hints & troubleshooting tips

If your system does not boot, check the following:

1. If you receive an error message or hear a series of beeps,

your system may not be recognizing the new memory.

Remove and reinstall the modules to ensure they are

securely seated in the sockets.

2. If your system won’t boot, check all of the connections

inside your computer. It is easy to bump a cable and pull it

out of its connector, disabling devices such as your hard

drive or CD-ROM. If your system still won’t reboot, contact

Crucial Technical Support.

3. When restarting your system, you may get a message

prompting you to update the conﬁguration settings. Refer

to your owner’s manual for information. If you are still

unsure, please call Crucial Technical Support for assistance.

4. If you get a memory mismatch message, follow the

prompts to enter the Setup menu, and then select Save

and Exit. (This is not an error—some systems must do this

to update the system settings.)

If you encounter any of the following problems, please

contact Crucial Technical Support:

1. Your module doesn’t seem to ﬁt; do not force it into the

socket.

2. Your system is recognizing only half of the new module’s

memory.

Product specificaties

Merk:	Crucial
Categorie:	Niet gecategoriseerd
Model:	DDR3-1600 SODIMM
Intern geheugen:	16 GB
Intern geheugentype:	DDR3
ECC:	Nee
Kloksnelheid geheugen:	1600 MHz
Component voor:	Notebook
Geheugenlayout (modules x formaat):	2 x 8 GB
Type gebufferd geheugen:	Unregistered (unbuffered)
Geheugen voltage:	1.35 V
CAS-latentie:	11
Module configuration:	1024M x 64