Crucial BLM8G44C19U4BL Handleiding

Crucial Niet gecategoriseerd BLM8G44C19U4BL

Lees hieronder de 📖 handleiding in het Nederlandse voor Crucial BLM8G44C19U4BL (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 175 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Install Guide

Memory Module Installation

Equipment needed

• Memory module(s)

• Non-magnetic-tip screwdriver (for removing the cover

on your computer)

• Your system’s owner’s manual

Installation process

1. Make sure that you are working in a static-safe environment.

Remove any plastic bags or papers from your work space.

2. Shut down your system and make sure the power is

completely o before unplugging the power cable from your

computer. For laptops, then remove the battery.

3. Hold the power button for 3-5 seconds to discharge residual

electricity.

4. Remove your computer’s cover. Refer to your owner’s

manual for how to do this.

The memory & storage experts™

5. To protect your new memory modules and your system’s

components from static damage during the installation

process, touch any of the unpainted metal surfaces on

your computer’s frame before handling and installing

memory.

6. Using your system’s owner’s manual, locate your

computer’s memory expansion slots. Do not use any

tools in the removal or installation of memory modules.

7. Insert your new memory module(s) in accordance with

the illustrations in this guide. Align the notch(es) on the

module with the notch(es) in the slot, and then press the

module down until the clips on the slot snap into place.

(It can take 20 to 30 pounds of pressure to install a

module.) Fill the memory slots on your computer starting

with the highest density (i.e. put the highest density

module in bank 0).

8. Once the module(s) have been installed, replace the

cover on your computer and reconnect the power cord or

battery. Installation is now complete.

DIMM installation

Using firm, even pressure, push DIMM into slot until

clips snap into place. Do not assist clips.

SODIMM installation

Firmly push the SODIMM in at a 45-degree angle,

and then push down until clips snap into place.

When it is fully seated in the slot, one-sixteenth of an inch or less

of the gold pins will be visible.

Helpful hints & troubleshooting tips

If your system does not boot, check the following:

1. If you receive an error message or hear a series of beeps,

your system may not be recognizing the new memory.

Remove and reinstall the modules to ensure they are

securely seated in the slots.

2. If your system won’t boot, check all of the connections inside

your computer. It is easy to bump a cable and pull it out of its

connector, disabling devices such as your hard drive or

CD-ROM. If your system still won’t reboot, contact Crucial

Technical Support.

3. When restarting your system, you may get a message

prompting you to update the configuration settings. Refer to

your owner’s manual for information. If you are still unsure,

please call Crucial Technical Support for assistance.

4. If you get a memory mismatch message, follow the prompts

to enter the Setup menu, and then select Save and Exit.

(This is not an error—some systems must do this to update

the system settings.)

If you have any issues with installation, contact Crucial

support with any questions or concerns.

Product specificaties

Merk:	Crucial
Categorie:	Niet gecategoriseerd
Model:	BLM8G44C19U4BL
Intern geheugen:	8 GB
Intern geheugentype:	DDR4
Backlight:	Ja
Backlight-kleur:	Meerkleurig
ECC:	Nee
Kloksnelheid geheugen:	4400 MHz
Type koeling:	Koelplaat
Component voor:	Pc/server
Geheugenlayout (modules x formaat):	1 x 8 GB
Type gebufferd geheugen:	Unregistered (unbuffered)
Geheugen voltage:	1.4 V
CAS-latentie:	19
Module configuration:	1024M x 64