CRU RAX841-XJ Handleiding

CRU Disk array RAX841-XJ

Lees hieronder de 📖 handleiding in het Nederlandse voor CRU RAX841-XJ (6 pagina's) in de categorie Disk array. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

RAX™ 8 Bay-XJ User Manual

A9-840-0006 Revision: 1.0

• Two LEDs per bay for power and access.

• Fast multi-lane SAS/SATA host connection.

• Each SATA hard drive has its own data channel for maximum speed.

• Sturdy aluminum case provides excellent heat dissipation and rugged durability.

Models Covered:

RAX840-XJ, RAX841-XJ, and RAX845-XJ

RAX841-XJ

RAXTM

RTX220 QR - Manual

1. Pre-Installation Steps

1.1 RAX-XJ Accessories

Check the accessories with RAX-XJ. Contact CRU if any parts are missing

or damaged.

Accessories Included with RAX 8-Bay-XJ:

RAX 8-Bay -XJ Bundle also includes the following:

1.2 Identifying Parts

Take a moment to familiarize yourself with the parts of RAX-XJ. This

will help you to better understand the remaining instructions.

Table of Contents

Accessories Quantity

RAX-XJ unit 1

Power cords (RAX 840 and RAX841 are available

with single or dual power supplies)

1 or 2

Quick Start Guide and warranty information 1

Table of Contents 1

1. Pre-Installation Steps 1

1.1 RAX-XJ Accessories 1

1.2 Identifying Parts 1

2. Installation Steps 2

2.1 Installing a Host Bus Adapter (HBA) 2

2.2 Tips for Rack Mounting 2

2.3 Installing Hard Drives 2

2.4 Connecting and Powering RAX-XJ 3

3. Usage with Mac and Windows Operating Systems 3

3.1 Usage with Macintosh Computers 3

3.1.1 Compatibility 3

3.1.2 Formatting a drive 3

3.1.3 Mounting and Ejecting Volumes 3

3.1.4 Creating a boot drive 3

3.2 Usage with Windows Operating System 3

3.2.1 Compatibility 3

3.2.2 Formatting a drive 4

3.2.3 Mounting and Ejecting Volumes 4

3.2.4 Creating a boot drive 4

4. Frequently Asked Questions 4

5. Technical Speciﬁcations 5

Page 1

Bay FansDual multi-lane

SAS/ SATA ports

(SFF-8088)

Chassis Fan

Power SwitchCarrier Handle Drive Activity

LED

Drive Ready/

Error LED

Accessories Quantity

Compatible host card 1

Multi-lane SAS/SATA cables 2

Power Outlet

Power Supply Fan

RTX220 QR - Manual

2. Installation Steps

2.1 Installing a Host Bus Adapter (HBA)

(Optional) Install a host bus

adapter (HBA) with multi-lane

SAS/SATA ports into an empty

expansion slot inside your com-

puter. The following general

steps will work for most cards.

Instructions for individual cards

may vary, so consult your card’s

user manual.

a. Power down the computer system.

b. Insert the PCI card into an available PCI slot. Do not force it, but it

will take ﬁrm pressure to fully seat the interface. It may help to

gently rock the card back and forth as you apply pressure.

c. Once the card is fully seated in the slot, secure it in place with

a screw.

d. Turn the computer back on.

2.2 Installing Hard Drives

2.2.1 HDD Installation for RAX840-XJ

a. Pull on the ejection

handle and open the door.

b. Slide in your SATA hard

drive, connector-end ﬁrst.

c. Shut the door.

2.2.2 HDD Installation for RAX841-XJ

a. Slide the drive carrier out

of the RAX.

b. The carrier’s cover is held

in place by a screw on the

rear of the carrier. Remove the screw, then remove the cover.

c. Slide the drive in from the front of the carrier.

d. Mate the connection on the drive with the connection on the

drive carrier circuit board.

e. Flip the drive/carrier assembly over, and secure the drive in

place with the provided screws.

f. Attach the Temperature Control Cooling Sensor to the top of

the drive with an adhesive strip.

g. Replace the carrier cover and secure the screw on the rear of

the carrier.

h. Slide the carrier into the RAX.

2.2.3 HDD Installation for RAX845-XJ

a. Slide the drive carrier out of the

frame.

b. The carrier’s cover is held in place by

two screws—one on either side of

the carrier. Remove these screws, then remove the cover.

c. Insert the drive into the carrier.

d. Mate the connection on the drive with the connection on the

drive carrier circuit board.

e. Flip the drive/carrier assembly over, and secure the drive in

place with the provided screws.

f. Replace the drive cover and secure the screw on the rear of the

carrier.

g. Slide the carrier into the frame assembly.

2.3 Connecting and Powering RAX 8-Bay-XJ

Connect the SFF-8088 data cable to the RAX and your host computer.

Plug in the power cord(s) to the unit and into a grounded electrical

outlet. With hard drives in the unit, turn on the power.

• For the RAX840-XJ the drives will begin to spin up automatically.

Page 2

NOTE: The drive’s label should be facing up.

NOTE: greenA ﬂashing LED on the bay indicates bay fan failure.

Call CRU technical support for assistance.

NOTE: redA ﬂashing LED on the bay indicates bay fan failure.

Call CRU technical support for assistance.

Product specificaties

Merk:	CRU
Categorie:	Disk array
Model:	RAX841-XJ
Kleur van het product:	Zwart
Gewicht:	21320 g
Breedte:	450 mm
Diepte:	431 mm
Hoogte:	173 mm
LED-indicatoren:	Ja
Soort serieële aansluiting:	SATA
Certificering:	FCC, CE, RCM
Materiaal:	Metaal
Duurzaamheidscertificaten:	RoHS
Aantal ventilatoren:	3 ventilator(en)
Rack-montage:	Ja
Opslag schijfgrootte:	3.5 "
Ondersteunde opslagstationinterfaces:	SAS, Serial ATA III
Soorten RAID:	JBOD
Overdrachtssnelheid:	6 Gbit/s
Rackcapaciteit:	4U
Aantal storage drives ondersteund:	8
Hot-swap:	Ja