Crofton GT-SPM-09 Handleiding

Crofton Peper-/zoutmolen GT-SPM-09

Lees hieronder de 📖 handleiding in het Nederlandse voor Crofton GT-SPM-09 (3 pagina's) in de categorie Peper-/zoutmolen. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

User

Manual

YEAR S

WARRANTY

Imported by:

Globaltronics GmbH & Co. KG

Domstr. 19

20095 Hamburg

GERMANY

AFTER SALES SUPPORT

info@globaltronicssupport.com

0800 / 328 6020

MODEL:

GT-SPM-09

99279

12/2019

ELECTRIC

SALT/PEPPER MILL

A 1

Scope of supply⁄

Device parts

1On/off switch

2End cap

3Casing with motor

and battery holder

4Grinding material

container for salt or

pepper

5Grinding rod

6Conductor for light

7Protective cap

8Adjustment wheel

for grinding fineness

(coarse/fine)

9Light

10 Battery, 6x LR03

(AAA), 1.5 V

Additional scope of supply :

• 6x LR03 (AAA), 1.5 V

• Operating instructions

with guarantee

General

Read and keep

operating instructions

Read the instructions for

use, particularly the safety

instructions, with care, be-

fore using the electric salt/

pepper mill (hereinafter only

referred to as “mill”).

Failure to comply with these

instructions for use may lead

to serious injuries or damage

to the mill.

The instructions for use are

based on the valid standards

and rules in the European

Union.

Please also note the coun-

try-specific directives and

laws abroad.

Keep the instructions for use

and the till receipt. If you

pass the mill on to third par-

ties, please also ensure that

you pass on these instruc-

tions for use for continued

use.

Explanation of

symbols

The following symbols and

signal words are used in

these instructions for use or

on the packaging.

WARNING!

This signal symbol/word in-

dicates a hazard with a me-

dium degree of risk, which

could lead to death or seri-

ous injury if it is not avoided.

CAUTION!

This signal symbol/word in-

dicates a hazard with a low

degree of risk, which could

lead to minor or moderate

injury if it is not avoided.

NOTE!

This signal word warns

of possible damage to

property.

This symbol gives

you useful addi-

tional information

about use.

− Children may not

play with the mill.

Cleaning and main-

tenance by the

user must not be

performed by chil-

dren unless they

are 8years of age

and older and are

supervised.

− Keep children away

from the mill.

− Do not leave the

mill unattended

during operation.

− Do not let children

play with the pack-

aging film. Chil-

dren may become

caught in it while

playing and suffo-

cate.

CAUTION!

Injury hazard!

Improper handling of the

batteries result in injuries.

− Remove the batteries from

the mill, if they are deplet-

ed or if you are not using

the mill for a longer period

of time. This way, you can

avoid leaking battery acid.

− Do not expose the batter-

ies to any extreme condi-

tions by e.g. laying them

on a radiator or exposing

them to direct sunlight.

This increases the risk of

the batteries leaking.

NOTE!

Risk of damage!

Improper handling of the

mill may result in damage.

− Make certain that you

have inserted the bat-

Conformity dec-

laration (refer to

„Conformity decla-

ration” chapter):

Products that are

marked with this

symbol fulfil all

applicable Commu-

nity regulations of

the European Eco-

nomic Area.

Safety

Intended use

The mill is exclusively de-

signed for grinding salt and

pepper. The mill is exclusive-

ly intended for private use

and is not suitable for the

commercial sector. The mill is

not a toy.

Only use the mill as de-

scribed in these instructions

for use. Any other use shall

be regarded as improper

and can lead to material

damage. The manufacturer

or retailer shall not assume

any liability for losses caused

by intended or improper use.

Safety instructions

WARNING!

This article can be used by

persons with reduced phys-

ical, sensory or mental capa-

bilities or lack of experience

and knowledge if they have

been given supervision or

instruction concerning use

of the mill in a safe way and

understand the hazards

involved.

teries with the correct

polarity (+/-), in order to

avoid damaging the mill.

− If necessary, clean the

battery and device con-

tacts prior to insertion.

− Always replace all batter-

ies. Do not use different

types of batteries, battery

brands or batteries with

different capacities.

− Do not ﬁll the grinding

material container right

up to the top edge,

please note the maxi-

mum ﬁling level (see “Fill

with grinding material”).

− The salt crystals may

expand from moisture, so

that the container could

burst.

− Only switch the mill on,

if it is ﬁlled with grinding

material (salt or pepper).

Otherwise, the grind-

ing mechanism may be

damaged.

− Do not make any mod-

iﬁcations to the mill.

Only allow repairs to be

carried out by a profes-

sional workshop and pay

attention to the guaran-

tee conditions. The

− mill may become dam-

aged due to non-profes-

sional repair.

Prior to initial use

Unpacking and

inspection

1. Check whether the deliv-

ery is complete (see Fig. A

and B).

2. Take the mill out of the

packaging and check

whether the mill or the

spare parts are damaged.

If this is the case, do not

use the mill. Contact the

manufacturer.

3. Remove the packaging

material and all protec-

tive films and dispose of

these properly.

Inserting⁄replacing

batteries

WARNING!

Danger of poisoning!

Batteries can be life-endan-

gering if swallowed.

− Therefore, keep the mill

and batteries out of

reach for small children.

If a battery has been

swallowed, immediately

contact a physician.

− Avoid contact by battery

fluid with the skin, eyes

and mucous mem-

branes. When coming

into contact with battery

fluid, immediately rinse

the affected area with

clear water and contact a

physician.

WARNING!

Fire and explosion hazard!

Improper handling of the

batteries result in injuries.

− Do not recharge the

batteries and do not try

to reactivate them using

other means.

− Do not dismantle the

batteries.

− Never throw batteries

into fire.

− Never short-circuit the

batteries.

To replace the batteries, pro-

ceed as follows:

1. Hold the casing 3

tightly and turn the end

cap 2 with your other

hand, counter-clockwise,

as far as it will go.

The mark on the end

cap must point to the

open lock symbol.

2. Remove the battery

holder from the casing.

3. Remove the old batteries.

Please note the disposal

instructions.

4. Insert six new batteries

10 (type AAA/LR03) as

shown on the base of the

battery holder.

Pay attention to the cor-

rect polarity (+/-).

5. Put the end cap back on

and turn it clockwise, as

far as it will go.

The mark on the end

cap must point to the

closed lock symbol.

Fill with grinding

material

1. Hold the casing 3

tightly and with the other

hand, turn the grinding

material container 4

counter-clockwise as far

as it will go.

The mark on the end

cap must point to the

open lock symbol.

2. Pull off the spice cham-

ber in a downwards

direction.

3. Fill the grinding material

container up to 80%

with salt crystals or

peppercorns.

4. Place the casing on the

grinding material con-

tainer and turn the grind-

ing material container

clockwise as far as it will

go.

The mark on the end

cap must point to the

closed lock symbol.

The mill is now locked and

ready for use.

Use

NOTE!

Risk of damage!

Improper use of the mill may

result in damage.

− Only switch the mill on,

if it is filled with grinding

material (salt or pepper).

The advantage of a mill is

that it only grinds the salt

or pepper once you require

the respective ingredient.

This way, the spice has more

flavour.

1. Remove the protective

cap 7.

2. Hold the mill over the

food to be seasoned and

press the on/off switch

1. The grinding mech-

anism and lamp 9

remain switched for on as

long as you press the on/

off switch.

3. Replace the protective

cap after use.

WARRANTY CARD

ELECTRIC SALT⁄PEPPER MILL

Description of malfunction:

Your details:

Date and location of purchase:

Name:

Adress:

E-Mail:

00800 / 4467 5888

Please check: stainless steel gun metal white r r r

Please contact our AFTER SALES SUPPORT by phone or e-mail before

sending in the device. This allows us to provide support in the event of

possible operator errors.

info@globaltronicssupport.com

99279

MODEL:

12/2019

GT-SPM-09

AFTER SALES SUPPORT

PRODUCT CODE

Globaltronics Service Center

c/o Bridges Logistics

PO Box 1125

Bromley, BR1 9TW, UNITED KINGDOM

info@globaltronicssupport.com

PO51002390

SERVICE CENTER

0800 / 328 6020

GB 00800 / 4467 5888

If the mill is

blocked, the grind-

ing mechanism

has a blockage. In

this case, the mill

must be shaken

slightly, put up-

side-down and

briefly switched

on.

Set degree of

fineness

1. Remove the protective

cap 7.

2. Turn the mill upside-

down and switch it on

briefly, in order to free

the grinding mechanism.

3. Turn the adjusting wheel

for the degree of fineness

8 in the middle of the

grinding mechanism in

the appropriate direction.

Please note the arrow

marker and +/- marks

(see Fig. B).

Coarse degree of fineness:

− Rotate counter-clockwise

in the “+” direction.

Fine degree of fineness:

− Rotate clockwise in the

“-” direction.

Troubleshooting

No function.

− Inserting new batteries.

− Insert the batteries in the

right direction.

The mill is grinding, but

nothing is coming out.

− Remove protective cap

− Do not turn the adjust-

ment wheel for the

degree of ﬁneness 8

clockwise as far as it will

go.

If the lamp no

longer lights up, it

is not possible to

replace the lamp.

Storage

If you do not use the mill for

a longer period of time:

1. Remove the batteries.

2. Remove the grounds

from the spice chamber.

3. Store the grinder in a dry

and frost-free place.

Cleaning

NOTE!

Risk of damage!

Improper cleaning of the mill

may result in damage.

− Do not immerse the mill

or parts of it in water or

other liquids.

− Never use hard, scratch-

ing or abrasive deter-

gents or similar, for

cleaning the mill. You

might scratch the surface

this way.

1. Wipe the mill clean with a

soft, slightly dampened

cloth.

2. For further maintenance

of the stainless steel sur-

face, use a commercially

available stainless steel

care product. Pay atten-

tion to the manufacturer

information on the care

product packaging.

Technical data

Modell GT-SPM-09

Battery: 6x 1.5 V

LR03 (AAA)

9 V , 1A

Product

number:

99279

Because our products are

constantly being further

developed and improved,

design modifications and

technical changes are

possible.

These operating instructions

can also be downloaded as

a PDF file from our website

www.gt-support.de.

Conformity

Declaration

The conformity of

the product with

the legally pre-

scribed standards

is guaranteed.

You can find the

full conformity

declaration on the

Internet at www.

gt-support.de.

Disposal

Disposal of packaging

Sort the packaging

before you dispose

of it. Dispose of the

cardboard with

the recycled paper

service and plastic

with the appro-

priate collection

service.

Disposal of device

Dispose this device in com-

pliance with the regulations

that apply to your country.

Old devices are

not permitted to

be disposed of

with household

waste!

If the mill should no longer

be usable, every consumer

is legally obligated to sub-

mit old devices separately

from household waste,

e.g. to a collection centre

of his/her local authority/

district. This ensures that

old devices are recycled

properly and negative

effects on the environ-

ment are avoided. That is

why electrical devices are

identified with the symbol

shown above.

Batteries and

rechargeable bat-

teries may not be

disposed of with

household waste!

As the end user you are

required by law to bring

all batteries and recharge-

able batteries, regardless

whether they contain

harmful substances* or not,

to a collection point run by

the local authority or to a

retailer, so that they can be

disposed of in an environ-

mentally friendly manner.*

*labelled with: Pb = lead

Warranty conditions

Dear Customer,

The ALDI warranty offers you extensive benefits:

Warranty period: 3 years from date of purchase.

6 months for wear parts and consumables

under normal and proper conditions of use

(e.g. rechargeable batteries)

Costs: Free repair/exchange

No transport costs

Hotline: The cost of calls from land-lines and mobi-

les may vary depending upon your service

provider

Phone lines available: Monday to Friday 8:00 am - 5:00 pm

Please contact our AFTER SALES SUPPORT by phone, e-mail or fax before

sending in the device. This allows us to provide support in the event of

possible operator errors.

In order to make a claim under the warranty, please send us:

• The faulty item together with the original purchase receipt and the

completed warranty card

• The faulty product with all components included in the packaging

The warranty does not cover damage caused by:

• (e.g. lightning, water, ﬁre)Accident or unanticipated events

• orImproper use transport

• Disregard of the safety maintenance instructionsand

• Other improper treatment modiﬁcation or of the product

After the expiry of the warranty period, you still have the possibility

to have your product repaired at your own expense. If the repair or

the estimate of costs is not free of charge you will be informed

accordingly in advance.

This warranty does not affect your statutory rights. In the event that

a product is received for repair, neither the service company nor the

seller will assume any liability for data or settings possibly stored on

the product by the customer.

Great care has gone into the manufacture of this product and it should

therefore provide you with years of good service when used properly.

In the event of product failure within its intended use over the course of the first

3 years after date of purchase, we will remedy the problem as quickly as

possible once it has been brought to our attention. In the unlikely event of such

an occurrence, or if you require any information about the product, please

both in this manual and on the product itself.

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, ATHERSTONE

WARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.

PO BOX 726, NAAS, CO. KILDARE.

visit us at www.aldi.com

GB IE

Product specificaties

Merk:	Crofton
Categorie:	Peper-/zoutmolen
Model:	GT-SPM-09

Heb je hulp nodig?

Als je hulp nodig hebt met Crofton GT-SPM-09 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Peper-/zoutmolen Crofton

Crofton GT-SPM-09 Handleiding

26 November 2023

Handleiding Peper-/zoutmolen

Nieuwste handleidingen voor Peper-/zoutmolen

AdHoc PEPE Handleiding

10 December 2024

Cecotec Cumbia SteelMill 2000 Adjust Handleiding

18 November 2024

Waring Commercial WSG30 Handleiding

16 November 2024

Waring Commercial WSG60 Handleiding

16 November 2024

Eldom MP20 Handleiding

8 Augustus 2024

Eldom MP22 Handleiding

8 Augustus 2024

Eldom MP21 Handleiding

8 Augustus 2024

Eldom MP17 Handleiding

8 Augustus 2024

Eldom MP18 Handleiding

8 Augustus 2024

Eldom MP19 Handleiding

8 Augustus 2024