Craftsman CMXGMAM201202 Handleiding

Craftsman Grasmaaier CMXGMAM201202

Lees hieronder de đź“– handleiding in het Nederlandse voor Craftsman CMXGMAM201202 (32 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
Safe Operation Practices • Set-Up • Operation • Service • Troubleshooting
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
OperatOr’s Manual
Form No. 769-11201C
(November 13, 2018)
Safe Operation Practices ........................................ 2
Assembly & Set-Up 6 ..................................................
Controls & Operation .............................................. 9
Service .....................................................................12
Troubleshooting .....................................................15
Spanish ....................................................................17
Parts/Warranty See Separate Supplement ..............
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all
models and the model depicted may differ from yours.
Large Mower
28” Rear Wheel Drive
Model Series W3 and W6
Important Safe Operation Practices
1
2
WARN ING! This symbol points out
important safety instructions which,
if not followed, could endanger the
personal safety and/or property of
yourself and others. Read and
follow all instructions in this manual before
attempting to operate this machine. Failure to
comply with these instructions may result in
personal injury. When you see this symbol.
HEED ITS WARNING!
DANGER: This machine was built to
be operated according to the safe
operation practices in this manual.
As with any type of power
equipment, carelessness or error on
the part of the operator can result in serious
injury. This machine is capable of amputating
fingers, hands, toes and feet and throwing foreign
objects. Failure to observe the following safety
instructions could result in serious injury or death.
CALIFORNIA PROPOSITION 65
WARN ING! Engine Exhaust,
some of its constituents, and
certain vehicle components
contain or emit chemicals
known to State of California to cause cancer
and birth defects or other reproductive harm.
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California to
cause cancer and reproductive harm. Wash
hands after handling.
General Operation
1. Read this operator’s manual carefully in
its entirety before attempting to assemble
this machine. Read, understand, and
follow all instructions on the machine and
in the manual(s) before operation. Keep
this manual in a safe place for future and
regular reference.
2. Be completely familiar with the controls
and the proper use of this machine before
operating it.
3. This machine is a precision piece of power
equipment, not a plaything. Therefore,
exercise extreme caution at all times. This
machine has been designed to perform
one job: to mow grass. Do not use it for any
other purpose.
4. Never allow children under 14 years of
age to operate this machine. Children 14
and over should read and understand the
instructions and safe operation practices
in this manual and on the machine and
should be trained and supervised by an
adult.
5. Only responsible individuals who are
familiar with these rules of safe operation
should be allowed to use this machine.
6. Thoroughly inspect the area where the
equipment is to be used. Remove all
stones, sticks, wire, bones, toys and other
foreign objects, which could be tripped
over or picked up and thrown by the
blade. Thrown objects can cause serious
personal injury.
7. Plan your mowing pattern to avoid
discharge of material toward roads,
sidewalks, bystanders and the like. Also,
avoid discharging material against a
wall or obstruction, which may cause
discharged material to ricochet back
toward the operator.
8. To help avoid blade contact or a thrown
object injury, stay in operator zone
behind handles and keep children,
bystanders, helpers and pets at least 75
feet from mower while it is in operation.
Stop machine if anyone enters area.
9. Always wear safety glasses or safety
goggles during operation and while
performing an adjustment or repair to
protect your eyes. Thrown objects which
ricochet can cause serious injury to the
eyes.
10. Wear sturdy, rough-soled work shoes
and close-fitting slacks and shirts. Shirts
and pants that cover the arms and legs
and steel-toed shoes are recommended.
Never operate this machine in bare feet,
sandals, slippery or light-weight (e.g.
canvas) shoes.
11. Do not put hands or feet near rotating
parts or under the cutting deck. Contact
with blade can amputate fingers, hands,
toes and feet.
12. A missing or damaged discharge cover
can cause blade contact or thrown object
injuries.
13. Many injuries occur as a result of the
mower being pulled over the foot during
a fall caused by slipping or tripping.
Do not hold on to the mower if you are
falling; release the handle immediately.
14. Never pull the mower back toward
you while you are walking. If you must
back the mower away from a wall or
obstruction first look down and behind
to avoid tripping and then follow these
steps:
a. Step back from mower to fully
extend your arms.
b. Be sure you are well balanced with
sure footing.
c. Pull the mower back slowly, no
more than half way toward you.
d. Repeat these steps as needed.
15. Do not operate the mower while under
the influence of alcohol or drugs.
16. Do not engage the self-propelled
mechanism on machines so equipped
while starting engine.
17. The blade control is a safety device. Never
attempt to bypass its operation. Doing
so makes the safety device inoperative
and may result in personal injury through
contact with the rotating blade. The
blade control must operate easily in both
directions and automatically return to the
disengaged position when released.
18. Never operate the mower in wet grass.
Always be sure of your footing. A slip and
fall can cause serious personal injury. If you
feel you are losing your footing, release
the blade control handle immediately and
the blade will stop rotating within three
seconds.
19. Mow only in daylight or good artificial
light. Walk, never run.
20. Stop the blade when crossing gravel
drives, walks or roads.
21. If the equipment should start to vibrate
abnormally, stop the engine and check
immediately for the cause. Vibration is
generally a warning of trouble.
22. Shut the engine off and wait until the
blade comes to a complete stop before
removing the grass catcher or unclogging
the chute. The cutting blade continues to
rotate for a few seconds after the blade
control is released. Never place any part
of the body in the blade area until you are
sure the blade has stopped rotating.
23. Never operate mower without proper
trail shield, discharge cover, grass catcher,
blade control or other safety protective
devices in place and working. Never
operate mower with damaged safety
devices. Failure to do so can result in
personal injury.
24. Muffler and engine become hot and can
cause a burn. Do not touch.
25. Never attempt to make a wheel or cutting
height adjustment while the engine is
running.
26. Only use parts and accessories made for
this machine by the manufacturer. Failure
to do so can result in personal injury.
27. When starting engine, pull cord slowly
until resistance is felt, then pull rapidly.
Rapid retraction of starter cord (kickback)
will pull hand and arm toward engine
faster than you can let go. Broken bones,
fractures, bruises or sprains could result.
28. If situations occur which are not covered
in this manual, use care and good
judgement. Contact Customer Support
for assistance or the name of the nearest
service dealer.
3S 1 — i Section mportant afe peration racticeS o p
Slope Operation
Slopes are a major factor related to slip and
fall accidents, which can result in severe injury.
Operation on slopes requires extra caution. The
machine is heavy and can speed up when going
downhill. Be prepared to maintain control of
the machine. If you feel uneasy on a slope, do
not mow it. For your safety, use the slope gauge
included as part of this manual to measure
slopes before operating this machine on a
sloped or hilly area. If the slope is greater than 15
degrees, do not mow it.
Do:
1. Mow across the face of slopes; never up
and down to avoid loss of control.
2. Exercise extreme caution when changing
direction on slopes; turn uphill not down.
3. Watch for holes, ruts, rocks, hidden
objects, or bumps which can cause you to
slip or trip. Tall grass can hide obstacles.
4. Always be sure of your footing. A slip
and fall can cause serious personal
injury. If you feel you are losing your
balance, release the blade control handle
immediately and the blade will stop
rotating within three (3) seconds.
Do Not:
1. Do not mow near drop-offs, ditches
or embankments, you could lose your
footing or balance.
2. Do not mow slopes greater than 15
degrees as shown on the slope gauge.
3. Do not mow on wet grass. Unstable
footing could cause slipping.
Children
Tragic accidents can occur if the operator is not
alert to the presence of children. Children are
often attracted to the mower and the mowing
activity. They do not understand the dangers.
Never assume that children will remain where
you last saw them.
1. Keep children out of the mowing area and
under watchful care of a responsible adult
other than the operator.
2. Be alert and turn mower off if a child
enters the area.
3. Before and while moving backwards, look
behind and down for small children.
4. Use extreme care when approaching blind
corners, doorways, shrubs, trees, or other
objects that may obscure your vision of a
child who may run into the mower.
5. Keep children away from hot or running
engines. They can suffer burns from a hot
muffler.
6. Never allow children under 14 years of
age to operate this machine. Children 14
and over should read and understand the
instructions and safe operation practices
in this manual and on the machine and be
trained and supervised by an adult.
7. After stopping engine, remove Electric
Start Push Key (if equipped) and keep it in
a safe place out of the reach of children.
Service
Safe Handling Of Gasoline:
1. To avoid personal injury or property
damage use extreme care in handling
gasoline. Gasoline is extremely flammable
and the vapors are explosive. Serious
personal injury can occur when gasoline is
spilled on yourself or your clothes, which
can ignite. Wash your skin and change
clothes immediately.
2. Use only an approved gasoline container.
3. Never fill containers inside a vehicle or on
a truck or trailer bed with a plastic liner.
Always place containers on the ground
away from your vehicle before filling.
4. Remove gas-powered equipment from the
truck or trailer and refuel it on the ground.
If this is not possible, then refuel such
equipment on a trailer with a portable
container, rather than from a gasoline
dispenser nozzle.
5. Keep the nozzle in contact with the rim of
the fuel tank or container opening at all
times until fueling is complete. Do not use
a nozzle lock-open device.
6. Extinguish all cigarettes, cigars, pipes and
other sources
of ignition.
7. Never fuel machine indoors because
flammable vapors will accumulate in the
area.
8. Never remove gas cap or add fuel while
engine is hot or running. Allow engine to
cool at least two minutes before refueling.
9. Never over fill fuel tank. Fill tank to no
more than 1 inch below bottom of filler
neck to provide for fuel expansion.
10. Replace gasoline cap and tighten securely.
11. If gasoline is spilled, wipe it off the engine
and equipment. Move machine to another
area. Wait 5 minutes before starting
engine.
12. Never store the machine or fuel container
near an open flame, spark or pilot light as
on a water heater, space heater, furnace,
clothes dryer or other gas appliances.
13. To reduce fire hazard, keep machine free
of grass, leaves, or other debris build-up.
Clean up oil or fuel spillage and remove
any fuel soaked debris.
14. Allow machine to cool at least 5 minutes
before storing.
General Service:
1. Never run an engine indoors or in a poorly
ventilated area. Engine exhaust contains
carbon monoxide, an odorless and deadly
gas.
2. Before cleaning, repairing, or inspecting,
make certain the blade and all moving
parts have stopped. Disconnect the spark
plug wire and ground against the engine
and remove Electric Start Push Key (if
equipped) to prevent unintended starting.
3. Check the blade and engine mounting
bolts at frequent intervals for proper
tightness. Also, visually inspect blade
for damage (e.g., bent, cracked, worn).
Replace blade with the original equipment
manufacture’s (O.E.M.) blade only, listed
in this manual. “Use of parts which
do not meet the original equipment
specifications may lead to improper
performance and compromise safety!”
4. Mower blades are sharp and can cut. Wrap
the blade or wear gloves, and use extra
caution when servicing them.
5. Keep all nuts, bolts, and screws tight to
be sure the equipment is in safe working
condition.
6. Never tamper with safety devices. Check
their proper operation regularly.
7. After striking a foreign object, stop
the engine, disconnect the spark plug
wire and ground against the engine.
Thoroughly inspect the mower for any
damage. Repair the damage before
starting and operating the mower.
8. Never attempt to make a wheel or cutting
height adjustment while the engine is
running.
9. Grass catcher components, discharge
cover, and trail shield are subject to wear
and damage which could expose moving
parts or allow objects to be thrown.
For safety protection, frequently check
components and replace immediately
with original equipment manufacturer’s
(O.E.M.) parts only, listed in this manual.
“Use of parts which do not meet the
original equipment specifications may
lead to improper performance and
compromise safety!”
10. Do not change the engine’s governor
setting or over-speed the engine. The
governor controls the maximum safe
operating speed of the engine.
11. Check fuel line, tank, cap, and fittings
frequently for cracks or leaks. Replace if
necessary.
12. Do not crank engine with spark plug
removed.
13. Maintain or replace safety and instruction
labels, as necessary.
14. Observe proper disposal laws and
regulations. Improper disposal of fluids
and materials can harm the environment.
15. According to the Consumer Products
Safety Commission (CPSC) and the U.S.
Environmental Protection Agency (EPA),
this product has an Average Useful Life of
seven (7) years, or 140 hours of operation.
At the end of the Average Useful Life
have the machine inspected annually by
an authorized service dealer to ensure
that all mechanical and safety systems
are working properly and not worn
excessively. Failure to do so can result in
accidents, injuries or death.

Product specificaties

Merk: Craftsman
Categorie: Grasmaaier
Model: CMXGMAM201202

Heb je hulp nodig?

Als je hulp nodig hebt met Craftsman CMXGMAM201202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Grasmaaier Craftsman

Craftsman

Craftsman CMXGRAM1130049 Handleiding

25 Mei 2023
Craftsman

Craftsman 25043 Handleiding

4 Mei 2023
Craftsman

Craftsman 25740 Handleiding

30 April 2023
Craftsman

Craftsman 25320 Handleiding

29 April 2023
Craftsman

Craftsman 252780 Handleiding

25 April 2023
Craftsman

Craftsman CMCMW270Z1 Handleiding

24 April 2023
Craftsman

Craftsman 25679 Handleiding

23 April 2023
Craftsman

Craftsman 25743 Handleiding

22 April 2023
Craftsman

Craftsman CMXGMAM201202 Handleiding

19 April 2023
Craftsman

Craftsman 27052 Handleiding

19 April 2023

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier

Anova

Anova MTC620 Handleiding

22 December 2024
Anova

Anova MC100 Handleiding

22 December 2024
Anova

Anova CC146T Handleiding

20 December 2024
Anova

Anova E60BC Handleiding

20 December 2024
Anova

Anova CC151T Handleiding

20 December 2024
Gude

Gude 320/20-4 Handleiding

19 December 2024
Zipper

Zipper ZI-MOS4T Handleiding

19 December 2024
Ozito

Ozito CPM-300C Handleiding

10 December 2024
Powerblade

Powerblade 350CX Handleiding

10 December 2024
Powerblade

Powerblade V475 Handleiding

10 December 2024