Cotech S1B-AJ-150 Handleiding

Cotech Slijpmachine S1B-AJ-150

Lees hieronder de 📖 handleiding in het Nederlandse voor Cotech S1B-AJ-150 (24 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Excenterslip
Eksentersliper
EpÀkeskohiomakone
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
LĂ€s hela bruksanvisningen noggrant och
försÀkra dig om att du har förstÄtt den innan
du anvÀnder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nĂžye og forsikre deg
om at du forstÄr dem fÞr du bruker enheten
og oppbevar dem for senere bruk.
TÀrkeÀtÀ tietoa:
Lue nÀmÀ ohjeet huolellisesti ja varmista
ettÀ olet ymmÀrtÀnyt ne, ennen kuin alat
kÀyttÀÀ laitetta. SÀilytÀ ohjeet myöhempÀÀ
tarvetta varten.
Art.no Model
18-3047 S1B-AJ-150-UK
30-9325 S1B-AJ-150
ENGLISHSVENSKANORSKSUOMI
Ver. 200802
Orbital Sander

ENGLISH
Orbital Sander
Art. no. 18-3047 model S1B-AJ-150-UK
30-9325 S1B-AJ-150
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)
General safety instructions
Warning! Read all the instructions. If the instructions below are not followed, this
might result in electric shock, re and/or serious injury. The term “electric tool” in
the warning text below refers to mains-operated or battery operated tools.
Working area
a) Keep the working area clean and well lit. Dark, cluttered areas could cause
accidents.
b) Do not use electric tools in explosive environments, e.g. near
inammable liquids, gases or dust. Electric tools generate sparks which can
ignite dust or vapours.
c) Keep children and onlookers out of the way while using the electric tool
.
Distractions might cause you to lose control.
Electrical safety
a) The electric tool plug must t into the socket. Never modify the plug in any
way. Never use an adaptor together with earthed electric tools. Unmodied
plugs and matching sockets decrease the risk of electric shock.
b) Avoid physical contact with earthed objects such as pipes, radiators,
kitchen cookers and fridges. There is an increased risk for an electric shock
if your body is earthed.
c) Do not expose the electric tool to rain or wet environments. If water gets
into an electric tool it increases the risk of electric shock.
d) Do not manhandle the power cable. Never use the power cable to carry
the tool and never wrench or tug the plug from the socket. Keep the power
cable away from heat, oil, sharp edges and moving parts. Damaged or tangled
power cables increase the risk of electric shock.
e) When using an electric tool outdoors use the appropriate extension.
Using an extension which is meant for outdoor use decreases the risk of
electric shock.

ENGLISH
Personal safety
a) Pay attention to what you are doing and use common sense when using
an electric tool. Do not use an electric tool if you are tired or under the
inuence of drugs, alcohol or medicine. A momentary lapse in concentration
when using an electric tool can result in serious personal injury.
b) Use protective equipment. Always wear safety goggles.
Using protective
equipment such as respiratory protective equipment, non-slip safety boots,
helmet and ear protectors where necessary decreases the risk of injury.
c) Avoid starting the tool by accident. Ensure that the switch is in the “OFF”
position before connecting the plug to the socket. Carrying an electric tool with
a nger on the switch/trigger or connecting an electric tool to the mains when
the switch is in the “ON” position could cause accidents.
d) Remove all service tools/keys before switching on the electric tool.
A forgotten service tool on a rotating part of the electric tool may result in
personal injury.
e) Do not overreach. Ensure that your stand steady and well-balanced all the
time. This gives you better control in unexpected situations.
f) Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your
hair, clothes and gloves away from moving parts. Long hair, loose clothing or
jewellery can get caught in moving parts.
a) If a dust collector is available, ensure that it is tted and used properly.
Using these aids can reduce the dust related health risks.
Electric tool use and maintenance
a) Do not force the electric tool. Use an electric tool which is suitable for the
work being carried out. The correct electric tool carries out the work better and
safer at the intended rate of feed.
b) Do not use the electric tool if the switch is broken. All electric tools which
cannot be controlled using the switch are dangerous and must be repaired.
c) Remove the plug from the socket before carrying out adjustments,
changing attachments or storing the electric tool. These preventative
measures decrease the risk of starting the electric tool by accident.
d) Store electric tools which are not being used out of the reach of children
and do not let anyone who is not acquainted with the electric tool or
these instructions use it. Electric tools are dangerous in the hands of
inexperienced users.
e) Electric tool maintenance. Check to see if anything is wrongly set, if moving
parts jam, if parts have broken or if something else can inuence the operation
of the electric tool. If something is damaged it must be repaired before use.
Many accidents happen because of poor maintenance.


Product specificaties

Merk: Cotech
Categorie: Slijpmachine
Model: S1B-AJ-150

Heb je hulp nodig?

Als je hulp nodig hebt met Cotech S1B-AJ-150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Slijpmachine Cotech

Handleiding Slijpmachine

Nieuwste handleidingen voor Slijpmachine