Coral Box QPS-16 Handleiding

Coral Box Waterpomp QPS-16

Lees hieronder de 📖 handleiding in het Nederlandse voor Coral Box QPS-16 (7 pagina's) in de categorie Waterpomp. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

Wireless Controller for Quiet Pump Plus

User’s Manual

CoralBox wave makers are specifically engineered as the perfect equipment to simulate the natural sea

environments.

Quiet pump is a very compact propeller pump using innovation and high technology solutions to provide

natural environments for different sea inhabitants in aquariums,fish tanks or in ponds. The excellent

design,including the compact housing and the magnet holder,permits 3D flow directions and simple mounting

at every point of aquarium walls.

Before assembling and operating correctly, please read the user manual carefully.

Models: QP-5 plus/QP-9 plus/QP-16 plus

Ⅰ. Function Overview

1. Unique control system allows to operate with different types of wave and multiple functions,which can

generate different wave patterns according to different needs.

2. Wireless controllers allow to synchronize operation among wave makers.One main controller can

remotely control several sub-controllers.

3. Low voltage DC electronic pump with variable frequency provides a safe environment for users.

4. Easy operation to achieve the multiple sea moving patterns.

5. Flow direction can be adjusted by different operative modes,as needed.

6. Input voltage of 100~240v allows for seamless operation in many regions of the world.

Ⅱ.Assembly and installation Notes

Suitable for most sizes of aquarium and ponds,up to 15mm glass wall thickness.

Caution!Danger of injury!Pay attention to your fingers when locating the magnet due to the strong attractive

power.

1. Separate the external magnet from the pump package. Locate the pump in the selected position inside

the tank on the internal side of the glass wall. Locate the external magnet on the external side of the same

glass wall and slide it up to the pump position. Ensure that the aquarium glass is free form algae inside and is

dry and clean outside.

2. If the controller has to be stuck on the tank, peel-off the protection paper from one side of the double

sided tape and past it on the back side of the controller. Peel-off the second protection paper and locate the

controller in the selected position.

3. Connect the pump to the controller by means of the 3-pins connector. Insert the adapter plug to the

controller and connect the power unit to the power supply source.

4. Start controller programming.

Ⅲ.Operation and Function

3.1 Buttons and Functions of LED Display Controller

Mode/Night :Press the button to select different

modes:F1,F2,F3,F4,F5,F6 F7and enter to the Night mode

by long hold-down the button.

Freq/reverse :Press the button to change the

Frequency and long hold the button to change to Reverse

mode.

WI-LE/Reset : Press the button to select Master

control”M”,"S" for Slave,”N” for Standalone.unit Hold down

the Reset key for 3 sec. to reset the controller unit.

Arrow keys :10Mins Feed / 20Mins Feed

or move position.

*Attention:If the pump operates in Night Mode,any other mode/feeding is disabled until exit from the Night

Mode

Be careful: Make sure switch off main switch of controller before plug controller with DC power supply or plug

controller with powerhead block.

3.2Technical data

3.3 Introduction of each mode

F1:Stream Mode

One or more pumps can

operate at the same time,

in constant flow.

Press to change

frequency

Press to change

flow

F2:Pulse Mode

One or more pumps can

operate at the same

time,in pulse flow.

Pulse the wave by time /

flow frequency.

Nature Mode(LPS)

Reef Mode(SPS)

Press to change

frequency

Press to change

flow

F3:Asynchronous

Wave Mode

Shift flow in cycles,

Pump A run, Pump B

stop;Pump B run, Pump

A stop

Need have 2 Pump with

WIFI master and slave to

run

Press to change

frequency

Press to change

flow

F4:Nature Mode

The power level

changes between

30%~100% making a

more natural flow

pattern.

Press to change

frequency

Press to

change flow

QP-5 plus

QP-9 plus

QP-16 plus

Flow

5000L

(1300gal/h)

9000L

(2340gal/h)

16000L

(4160gal/h)

Watts

10W

23W

40W

Size

85*60*65mm

(3.3*2.7*2.6inch)

105*80*85mm

(4.1*3.1*3.3inch)

125*90*85mm

(4.9*3.5*3.3inch)

F5:Reef Mode

Power of flow is changing

in a random mode in

volume and time. This is

the best mode for corals.

Press to change

frequency

Press to change

flow

F6:Timer Mode

Six different operative

modes can be set in this

mode. For example, the

first set of 9 a.m to 10

a.m stream mode, the

second set of 10 a.m to 1

p.m pulse mode.

F0: Stop Mode

Only work with timer

mode. This mode Stops

the Pump running in the

programmed time slot.

F7: Reverse Mode

Clockwise pump.The

pump uses the opposite

direction of the water

flow to improve cleaning

of your tank.

Press to change

frequency

Press to

change flow

*How to Set the Timer?

First you need to change Function to the F6: Timer mode

Press to switch timer program and input, press to move position.Press to adjusted the Real

Time/Schedule/Timer/Mode.

Example for our timer:

Schedule

Timer ( Start ~ End )

Mode

09:00 Start ~ 11:00 End

11:00 Start ~ 13:00 End

13:00 Start ~ 15:00 End

15:00 Start ~ 17:00 End

17:00 Start ~ 22:00 End

22:00 Start ~ 09:00 End

Ⅳ.Warnings

●Do not allow the pump to run dry.

●Select a dry location for the controller where it will not be splashed with water.

●Pay attention during magnets assembly. It is recommended to locate the magnetic pad close to the

outside wall of fish tank to prevent breaking the fish tank and then shift it in correspondence of the pump

location.

●Never disassemble the controller and the adaptor without professional guidance.

●Never repair a damaged cable without professional guidance. In case of main cable damage, change

the entire pump or power supply unit.

Ⅴ. Maintenance & FAQ

1.Why can't I change the mode?

Check if night mode is on, if it is set it to off. If Wireless is "S", the pump is controlled by the master pump,

change the wireless mode to N (Standalone)to allow for local settings.

Check the Timer if you change back to F6 Mode,after set the timer,you need to switch F6 to running.Make

sure all the timer program T1-T6 is set, remember check it not overlap corrupt on the same time.Otherwise it

will not function.

2.How Can I reset the controller?

Hold the Reset button 3 seconds, it will reset the controller programs to the factory status.

3.How many time periods can I program on each day?

Up to 6 time periods per days.

4.Why can’t i use F0 mode?

F0 Mode(Stop the pump),The function only works in Timer mode.

5.Why won’t my program run?

Check the timer, if you change back to F6 mode after you set the timer,you need to switch F6 to running.

6.My pump produces some noise.What can I do?

New pumps could have temporary sound issue. Normally the noise will be naturally reduced after one week of

operation. You can also try to take-out the impeller and reinstall the rubber bush.

7.How I can set for the Master and Slave Pump?

Set WIFI Button to “M” for A Pump,and set B Pump controller WIFI to “S”.

8.Which parts are consumables?

THE IMPELLER / THE RUBBER BUSH AND THE COVER ARE CONSUMABLE ITEM, WE RECOMMEND

TO CHECK REGULARLY THEIR STATUS AND TO CHANGE THEM AFTER TO PROVIDES BEST1 YEAR

PERFORMANCES.

ITEM

CODE

Impeller

81001

Rubber Bush

81002

Cover

81003

Package Content

Coral Box wave maker pump

Wireless controller with connection cable

Power unit with power cable

Bi-adhesive

User manual

●This product is for indoor use only. Never submerge the controller, the power supply unit or the connect

or inside the water to avoid unnecessary loss.

●Regularly clean the controller to ensure good performance.

●Rub the controller surface with a dry cloth if it has been accidentally wetted to prevent water from

dripping into controller.

●Sweep the waste in the pump housing and on the propeller by opening the pump housing. Rotate the

basket in anti-clockwise direction to open the housing and lock it by rotating in clockwise direction.

●Use soft cloth to rub the blade and clean the dirt in the pump

Ⅶ.WEEE

EU Waste Electrical and Electronic Equipment (WEEE) Directive In August of 2005, the European Union(EU)

implemented the EU WEEE Directive 2002/96/EC and later the WEEE Recast Directive 2012/191EU requiring

Producers of electronic and electrical equipment(EEE) to manage and finance the collection,reuse,recycling

and to appropriately treat WEEE that the Producer places on the EU market after August 13,2005.

The goal of this directive is to minimize the volume of electrical and electronic waste disposal and to

encourage re-use and recycling at the end of life. Coral Box has met its national obligations to the EU WEEE

Directive by registering in those countries to which Coral Box is an importer.

Coral Box has also elected to join WEEE Compliance Schemes in some countries to help manage customer

returns at end-of-life.If you have purchased Coral Box-branded electrical or electronic products in the EU and

are intending to discard these products at the end of their useful life,please do no dispose of them with your

other household or municipal waste. Coral Box has labeled its branded electronic products with the WEEE

Symbol.(figure 1)to alert our customers that products bearing this label should not be disposed of in a landfill

or with municipal or household waste in the EU.

Instead,please be aware that Coral Box is making a return and collection system available to you,free of

transportation and recycling costs,for discarding these products.Can only be used by the Company if this

document is publicly available.For a copy of Coral Box’s Selective Treatment of Waste Electrical and

Equipment outlined under Articles 14 and 15 and Annex VII of the EU WEEE Directive 2012/19/EU,please

click here WEEE Selective Treatment List and the list of hazardous materials used in our product.

Product specificaties

Merk:	Coral Box
Categorie:	Waterpomp
Model:	QPS-16

Heb je hulp nodig?

Als je hulp nodig hebt met Coral Box QPS-16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Waterpomp Coral Box

Coral Box QPS-16 Handleiding

24 Oktober 2022

Handleiding Waterpomp

Nieuwste handleidingen voor Waterpomp

Hitachi WT-P400GX Handleiding

15 November 2024

Einhell GE-GP 1246 Handleiding

14 November 2024

Einhell GC-WW 6839 Handleiding

13 November 2024

Sunnydaze Decor GSI-547 Handleiding

11 November 2024

Sunnydaze Decor WNC-861 Handleiding

11 November 2024

Sunnydaze Decor GSI-774 Handleiding

11 November 2024

Sunnydaze Decor QZC-359 Handleiding

11 November 2024

Sunnydaze Decor MCA-2781 Handleiding

11 November 2024

Sunnydaze Decor LZH-100 Handleiding

11 November 2024

Sunnydaze Decor MCA-2471 Handleiding

11 November 2024