Contour Design ROAM3 Handleiding

Contour Design Camcorder ROAM3

Lees hieronder de 📖 handleiding in het Nederlandse voor Contour Design ROAM3 (6 pagina's) in de categorie Camcorder. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

WATERPROOF HD ACTION CAMERA

USER MANUAL

TABLE OF CONTENTS

QUICK START GUIDE 2

CAMERA OVERVIEW 2

SETTING UP 3

CAUTIONS AND WARRANTY 4

CONTACT 5

CAMERA DIAGRAM KEY

A Recording Indicator

B Record Slider

C Record Slider Lock

D Rotating Lens

E Laser Line & Recording Indicator

QUICK START

1 Slide the Door Lock to the left so the

red square isn’t showing

2 Slide the camera door up to open

3 Insert the microSD Card

4 Close the camera door.

5 Slide the Door Lock to the right

to lock it closed

6 Slide the Record Slider

forward to record. Slide it back

to stop recording

7 Hold status button for three

seconds to engage photo mode

F Microphone

G Status Button

H Reset Button

I USB

J microSD Card Slot

K Card Format Button

L Door Lock

M Memory Status

N Battery Status

O Photo Mode Status

P 1-2 Settings Switch

SETTING UP

Download Contour Storyteller to your PC/Mac from the Contour website. The

link below will help you set up your camera to make sure it is registered,

update the time on your camera, and get the settings dialed to your custom

conﬁguration.

http://www.contour.com/startROAM3

CHARGING THE BATTERY

Slide the door up to open.

Connect your camera to a PC/Mac using the supplied USB Cable.

The Battery Status LED indicates the charge level of the battery. It will

change colors from red to green as the battery charges.

Charge is fully complete when the Battery Status LED turns green. This can

take up to three hours.

FORMATTING THE microSD CARD

Format the microSD Card prior to recording so your camera is able to

properly read and write to it.

Caution: formatting the card will erase everything on it

Check that the Record Slider is in the off position. Open the back of your

camera then press and hold the Format Button until the camera beeps

(three to ﬁve seconds), then release the Format Button. The microSD Card

LED will ﬂash while the card is formatting and then turn solid green when

the format is complete.

The ContourROAM3 is compatible with:

+ microSD compatability.

+ SDSC (standard capacity) 4GB class 4 card minimum.

+ SDHC (high capacity) class 4, 6, or 10 microSD Cards up to a maximum

capacity of 32GB.

Camera Status

Pressing the Status Button will:

+Activate the Laser Line for

15 seconds.

+ Display the current battery and

memory status.

MEMORY STATUS LED

Green: 50% or more

Yellow: 20 to 50%

Red: 20% or less

ERROR CONDITIONS

+Battery LED ﬂashes red: the battery is almost empty.

+Memory LED ﬂashes and there are continuous beeps: the microSD Card cannot

be accessed because the card is full, missing, or not properly formatted.

CAMERA SETTINGS

To adjust the settings on your camera, download and install the Contour Story

teller app to your PC/Mac.

http://contour.com/software/storyteller

With the camera connected to your computer, go to the Tools >> Conﬁgure

Camera menu in Contour Storyteller.

Here you can adjust:

Video:

1080p video at 30 frames per second (position 1 default)

960p video at 30 frames per second

720p video at 30 frames per second

720p video at 60 frames per second (position 2 default)

WVGA (480p) at 30 frames per second

WVGA (480p) at 60 frames per second

WVGA (480p) at 120 frames per second

Continuous Photo Mode (with photos taken every 1, 3, 5, 10, 30, or 60 seconds)

Audio

Mic sensitivity

Mic. Sensitivity

1-2 Switch

The 1-2 Switch on the back of your camera allows you to preset your Contour

ROAM3 with two different conﬁgurations that can be easily changed in the ﬁeld.

The settings for each switch position can be set up using Contour Storyteller

RECORDING

+ Start Recording: Move the Record Slider Lock so that the red square is not

showing and then slide the Record Slider forward. Your camera will power on,

beep once, and the Record Status LED will turn red, indicating that the camera

is now recording a video.

+ Stop Recording: Slide the Record Slider back. Your camera will beep twice, and

the Record Status LED will switch off, indicating that your camera has stopped

recording and is powered off.

BATTERY STATUS LED

Green: 50% or more

Yellow: 20 to 50%

Red: 20% or less

Lighting

White-balance settings

Lighting Filter

Lights

LED and laser settings

Product specificaties

Merk:	Contour Design
Categorie:	Camcorder
Model:	ROAM3
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	155 g
Breedte:	100 mm
Diepte:	55 mm
Hoogte:	34 mm
Gebruikershandleiding:	Ja
GPS:	Nee
Totaal aantal megapixels:	5 MP
Field of view (FOV) hoek:	170 °
Meegeleverde kabels:	USB
Compatibele geheugenkaarten:	MicroSD (TransFlash)
Maximale beeldsnelheid:	30 fps
Aantal USB 2.0-poorten:	1
Maximale videoresolutie:	1920 x 1080 Pixels
HD type:	Full HD
Ingebouwde microfoon:	Ja
Videoresoluties:	1920 x 1080 Pixels
Foto-modi:	Ja
Opslagmedia:	Geheugenkaart
Levensduur accu/batterij:	- uur
Grootte meegeleverde geheugenkaart:	8 GB
Waterdicht tot:	9 m
Veiligheidsfunties:	Waterbestendig