Conceptronic DDE02B Handleiding

Conceptronic Cradle/docking station DDE02B

Lees hieronder de 📖 handleiding in het Nederlandse voor Conceptronic DDE02B (15 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

Multi Language Quick Guide

Dual Bay Hard Drive Docking

Station USB 3.0

DDE02B

V1.0

English

Conceptronic DDE02B

Installation & usage

Connect the hard disk docking station to your computer

 Turn on your computer.

 Connect the included power adapter to the DC connector at the backside of the

hard disk docking station and to a free wall outlet.

 Connect the included USB 3.0 cable to the USB connector at the backside of

the hard disk docking station and to a free USB 3.0 port on your computer.

Note: You can also connect the hard disk docking station to a USB 2.0 or USB

1.1 port, but the speed will be limited to the speed of the USB controller of your

computer.

 Insert a SATA hard disk in the hard disk docking station.

 Turn on the hard disk docking station with the power switch at the backside.

The computer will automatically recognize and install the hard disk docking

station. No driver installation is required.

Safe remove the hard disk docking station from your computer

The hard disk docking station must be removed safely in your operating system

before you turn it oﬀ and remove the hard disk, in order to prevent data loss.

 Double click the on “Safely Remove Hardware” icon your system tray. in

The “Safely Remove Hardware” window will shown. be

 Click on the connected hard disk docking station (often listed as “USB Mass

Storage Device”) and click the “Stop” button.

 Conﬁrm the disconnection by clicking “OK”.

The hard disk docking station is now safely removed from your computer. You can

now turn oﬀ the hard disk docking station and remove the hard disk.

Duplicator (CLONE) Mode

The Duplicator Mode only works when the docking station is NOT connected to a PC

via the USB cable.

HDD A (Source): disk with the data you want to duplicate (clone).

HDD B (Destination): in which you want to store the data of the source disk.

Note: The capacity of the destination disk should be equal or larger than the source

disk. Make sure that those hard disks have no bad sectors. Bad sectors will cause

unpredictable problems.

 Put the source disk into the , then, put the destination disk into the HDD A bay HDD

B bay. Please make sure that those hard drives are correctly and ﬁrmly connected

to those SATA connectors of the docking station.

 Connect the power adapter to the docking station and power outlet.

 Press the power button to power up the docking station.

 Wait at least 10 seconds till the docking station is prepared.

Note: If you have important data on the hard disk, please back up the data before

beginning the Clone operation.

 Keep pressing the Clone button for 3 seconds to begin duplication.

During the Clone process, those LED indicators will ﬂash to show the percentage of

the progress:

Begin Clone process: 4 LEDs ﬂash one by one.

Green LED stays solid: 25%

Red LED stays solid: 50%

Yellow LED stays solid: 75%

Orange LED stays solid: 100%

When the green, red, yellow & orange LEDs all stay solid, the process of the Clone

had been ﬁnished.

Note: Those hard drives may become hot during the Clone process.

Product specificaties

Merk:	Conceptronic
Categorie:	Cradle/docking station
Model:	DDE02B
Kleur van het product:	Zwart
Gewicht:	187 g
Breedte:	120 mm
Diepte:	85 mm
Hoogte:	120 mm
Gewicht verpakking:	381 g
Breedte verpakking:	155 mm
Diepte verpakking:	95 mm
Hoogte verpakking:	230 mm
LED-indicatoren:	Ja
Type verpakking:	Doos
Stroom:	2.5 A
Aan/uitschakelaar:	Ja
Meegeleverde kabels:	USB
Inclusief AC-adapter:	Ja
Land van herkomst:	China
Aansluiting voor netstroomadapter:	Ja
Opslagmedia-type:	HDD
Plug and play:	Ja
Ondersteunt Windows:	Windows 10, Windows 7, Windows 8, Windows Vista, Windows XP
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Snelle installatiehandleiding:	Ja
Hostinterface:	USB 3.2 Gen 1 (3.1 Gen 1) Type-B
Max. overdrachtssnelheid:	5 Gbit/s
Opslag schijf-interface:	Serial ATA, Serial ATA II, Serial ATA III
Maximale opslagcapaciteit:	8 TB
(Buitenste) hoofdverpakking hoogte:	500 mm
(Buitenste) hoofdverpakking breedte:	495 mm
(Buitenste) hoofdverpakking brutogewicht:	7700 g
(Buitenste) hoofdverpakking lengte:	350 mm
Aantal USB 3.2 Gen 1 (3.1 Gen 1)-poorten:	1
Aantal storage drives ondersteund:	2
Opslagschijf afmetingen ondersteund:	2.5, 3.5 "
Code geharmoniseerd systeem (HS):	84733080