Comark KM820/V Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Comark KM820/V (10 pagina's) in de categorie Thermometer. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
KM20REF
REFERENCE
THERMOMETER
1
GENERAL INFORMATION
It is recommended that you read the safety and operation instructions
before using this instrument.
WARNING
TO AVOID DAMAGE OR BURNS, DO NOT MAKE TEMPERATURE
MEASUREMENTS IN MICROWAVE OVENS.
CAUTION
Temperature Measurement Probes
This precision instrument has been designed for use with the
extensive range of Comark temperature probes. The use of other
probes may impair the performance and accuracy of the instrument.
Full details of Comark probes and sensors can be obtained from
Comark Customer Support department or your local distributor.
Repeated sharp exing can break thermocouple probe leads. To
prolong lead life, avoid sharp bends or kinks in the leads, especially
near the connector.
This instrument is manufactured in accordance
with the Company’s ISO 9001 Quality Approved
System.
This instrument complies with the
Electromagnetic Compatibility Directive
EN 61326-1.
Declarations of Conformity available. Contact
Comark Customer Support or your local
Distributor.
In line with its policy of continuous development, Comark Instruments
reserves the right to alter the instrument speci cation without prior
notice. Further information is available from Comark Instruments or your
distributor.
ISO 9001
FM 26700
2
CALIBRATION, CERTIFICATION AND SERVICE
Certi cation
Comark can provide certi cates of calibration for its whole product range, to suit
ISO 9000 and other quality assurance procedures, food hygiene regulations,
HACCPs and environmental regulations. Comark certi cates are produced by
independent quality controlled processes which compare product performance
against agreed National Standards. For peace of mind and best practice Comark
recommend annual certi cation/recalibration.
Two levels of certi cation are available for infra-red temperature and non
temperature instruments, excluding humidity:- UKAS certi cates via an external
accredited laboratory and NPL traceable certi cates from the Comark calibration
laboratory.
Three levels of certi cation are available for contact temperature and humidity
products and these are detailed here:
a) UKAS Temperature Certi cation
The Comark UKAS (United Kingdom Accreditation Service) accredited
temperature calibration laboratory is one of the nest in the UK. Comark
UKAS certi cates can oer the lowest uncertainty of 0.01°C and
provide independent proof of correct calibration using equipment and
procedures audited by UKAS inspectors. The equipment used is fully
traceable to the National Physical Laboratory.
b) UKAS Humidity Certi cation
In addition to the Comark temperature laboratory, the humidity laboratory
continues the tradition of high accuracy certi cation and a wide range
(25% to 90%RH) with uncertainties of 2.8% of reading. This range also
includes Dew point measurements.
c) NPL Traceable Certi cation
Comark NPL certi cates are traceable to the National Physical
Laboratory and can oer uncertainty as low as 0.3°C.
Conformance
Certi cates of conformance can be supplied for new, serviced and recalibrated
instruments. These con rm that instruments are within their original manufactured
speci cation.
Service/Repairs
Regular servicing and any required repairs, under warranty or after, are available
from the Comark Service Department.
For more information on all Comark certi cation, calibration and service facilities
please call Comark Customer Support or contact your local distributor.
0451


Product specificaties

Merk: Comark
Categorie: Thermometer
Model: KM820/V

Heb je hulp nodig?

Als je hulp nodig hebt met Comark KM820/V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermometer Comark

Handleiding Thermometer

Nieuwste handleidingen voor Thermometer