Columbus P-7 Pro Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Columbus P-7 Pro (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Power on: Always on
Parts Description
Power Lamp Bluetooth Lamp
1 2
CAUTION
GB
The protection class of the external active antenna is IP66,
which can work normally in all-weather environments such as
rain, snow and high dust, but do not immerse the antenna
completely in water. The main unit of the P-7 Pro is not
waterproof.
As a precision electronics, the product contains no component
that can be repaired by your own. Any attempt to disassemble
the product will void the original manufacturer's warranty.
Thank you for choosing our product.
This manual is intended to guide you through the safe and
correct use of the product and its accessories, avoiding improper
operations that may result in injury of yourself or any other
person or cause device damage.
Disconnected: off
Connected: always on
Bluetooth LampPower Lamp
SMA ( )Connector Female
SMA Connector (Male)
USB Type-A Connector
External Active Antenna
(Magnetic Mount)
Pr
Pr
Pr
PrPro
o
o
oof
f
f
ffe
e
e
ees
s
s
sss
s
s
ssi
i
i
iio
o
o
oon
n
n
nna
a
a
aal H
l H
l H
l Hl HD G
D G
D G
D GD GN
N
N
NNS
S
S
SSS R
S R
S R
S RS Re
e
e
eec
c
c
cce
e
e
eei
i
i
iiv
v
v
vve
e
e
eer
r
r
rr
7
Quick
Quick
Quick
Quick Quick Star
Star
Star
StarStart
t
t
tt
Steps to Use
Connect the P-7 Pro to the external active antenna, and
tighten the antenna connector clockwise.
Place the external active antenna in a position with a good
view of the sky, such as the roof of the car, the top of the
surveying pole.
The main unit of the P-7 Pro is not waterproof.
The placement of the antenna significantly affects the
accuracy of the tracks. For more placement
suggestions, please visit: cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
The positioning status of the satellite needs to be
viewed on the terminal device.
Connect to the Terminal Device
The P-7 Pro supports two connection modes: wired and
wireless. Both connection modes are supported to connect
the device simultaneously.
DEVICE
12
DEVICE
3
The operating systems and connection modes supported by
the P-7 Pro are as follows:
Linux
USB
SPP
USB
SPP
USB
SPP
BLE
USB OTG
SPP/BLE
BLE
Plug the USB connector into
the computer.
Wired C
Wired C
Wired C
Wired CWired Connection
onnection
onnection
onnectiononnection
Plug the USB connector into
the mobile device via an OTG
cable.
4
4
4
444
How to connect with terminal
device please visit:
When wired, it supports hardware-level dual serial ports:
“Enhanced COM Port and “Standard COM Port”.
The P-7 Pro can be accessed by two programs simultaneously,
and the parameters of the P-7 Pro can be configured through
the Enhanced COM Port.
× ×
21
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
Connect with the power
bank during portable use.
Bluetooth Connection
Bluetooth Connection
Bluetooth Connection
Bluetooth ConnectionBluetooth Connection
Connect with the car charger
while driving.
BLE
5.1
SPP
2.1
How to connect with the App, please visit:
The P-7 Pro supports two Bluetooth protocols:
BLE5.1 and SPP 2.1.
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
5
5
5
555
The P-7 Pro supports applications for multiple platforms,
please refer to the support page for usage.
We will continuously update the list of supported App.
5
5
5
556
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/q
cbgps.com/p7/qcbgps.com/p7/q
Bluetooth GNSS Ovital maps
How to Use the App
Protection class
External Active Antenna IP66
Operating temperature
- 20 to +50 °C °C / -4 °F to +122 °F
Constellation
GPS (L1+L5), GLONASS, Galileo (E1+E5a),
QZSS (L1+L5), BeiDou, IRNSS (L5), SBAS
Accuracy *
Vertical: 15m
Horizontal: 0.5m/CEP(50%), 1.5m/CEP(95%)
Acquisition time *
Reacquisition: <2s, Cold start: <34s
Output sentences
Baud Rate (Default): 57,600bps
Protocol: NMEA-0183
Messages: GNRMC, GNGGA, GNGSV, GNGSA
(Default); GNGLL, GNVTG (Optional)
Geodesics
WGS84
Update rate
1Hz (Default), 5Hz
Bluetooth
SPP 2.1, BLE 5.1
Range: >20m (65 feet)
Connectors
USB device: USB 2.0 Type-A
Antenna connectors: SMA
Power consumption
Antenna: DC 3.3V / 20mA
Main unit: DC 5V / 100mA
Dimensions (WxHxD)
Antenna feeder: 300cm / 9.8feet
Main unit: 65 18 10mm / 2.6 0 7 0.4in× × × . ×
Weight
Main unit: 21g / 0.74oz
Antenna: 80g / 2.8oz
* The test was done outdoor, in an open area.
On content unmentioned in the instruction, please visit the
official website at any time to learn about the latest use skill
and information.
Specifications
±
±
±
±±
Trademark
Reproduction, transfer, distribution or storage of part or all of
the contents in this document in any form without the prior
written permission of VICTORY is prohibited.
Under no circumstances shall VICTORY be responsible for
any loss of data or income or any special, incidental,
consequential or indirect damages howsoever caused.
is a trademark of Victory Co., Ltd.
Other product and company names mentioned herein may
be trademarks or trade names of their respective owners.


Product specificaties

Merk: Columbus
Categorie: Niet gecategoriseerd
Model: P-7 Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Columbus P-7 Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Columbus

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd